Question about 2000 Harley Davidson FLHTCUI Electra Glide Ultra Classic

1 Answer

2007 Q/R fuel pipe leak.

Had a leak from tank connection , removed old 'o' ring that was damaged then another 'o' ring dropped out along with the valve,I have a rplacement 'o' ring but which order do they go back in ? will I have to remove tank ?

Posted by on

  • Dave May 03, 2013


    Sorted , used the 'o' ring from drain plug...perfect.

  • Dave May 03, 2013

    Sorted , used 'o' ring from drain plug...perfect no leak now.

×

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Harley Davidson Master
  • 43,096 Answers

Hi Dave, for more information on your question please visit the websites below and good luck:
Harley Check Valve Rebuild Kit
Tech Time Fuel Line Fix

Posted on May 26, 2015

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
Git-R-Dun
  • 6 Answers

SOURCE: 2000 Road Glide fuel leak at elbows just below fuel tank

Yes, more than likely you have defective o-rings. Harley will try to sell you the complete assy.
Remove and replace the o-ring seals, make sure you use o-rings that are compatible with gasoline. Many of the "regular black" o-rings are butyl-rubber, which will break down in gasoline.
The Buna-N (nitrile) or Viton o-rings i recommend for gasoline.

Good luck, i hope this helps.

Posted on Mar 16, 2009

  • 850 Answers

SOURCE: just painted my bike 05 king fuel injected my o

try fuel injector repair specialists in your area

Posted on Aug 14, 2009

wd4ity
  • 4565 Answers

SOURCE: how do you get the collar off an FXSTS exhaust header pipe

I think what you are talking about are the snap rings that go on the pipes to hold the exhaust flanges onto the pipes. They come off easily but you need the right tool to do it with. They make a tool that is similar to a pair of snap ring pliers with flat lips on them instead of small pins. Mac tools P22A snap ring pliers.

Posted on Jan 15, 2010

Testimonial: "Awesome, have done thsat and it worked well"

  • 155 Answers

SOURCE: FUEL LEAK BY THE TANK HOSE CONNECTION, IS AN

ran into this myself ,, you will have to change the whole fuel line to fix it.

Posted on Apr 08, 2010

  • 1 Answer

SOURCE: fuel leak on quick connect fitting on 2006 harley wide glide

I just changed mine and it only took about an hour and a half.

Posted on Jun 12, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

The only code showing is 0442. any ideas


Trouble Code: P0442

EVAP Control System Small Leak Detected

Possible Causes:


Canister Purge valve is damaged, leaking or it has failed.Charcoal canister is loaded with fuel or moisture.Fuel filler cap loose, cross-threaded, incorrect part or damaged.Fuel tank is cracked (leaking), or a leak exists in the 'O' ring.Fuel tank pressure sensor is damaged or has failed.Fuel vapor line(s), fuel pipes or hoses damaged or leaking.PCM has failed.

Nov 08, 2012 | 2000 Mitsubishi Eclipse

1 Answer

What does the code p0442 mean on a mitsubishi montero sport 2000?



Trouble Code: P0442
Most likely the gas cap.Hope this helps. Randy
EVAP Control System Small Leak Detected
Possible Causes:


Canister Purge valve is damaged, leaking or it has failed Charcoal canister is loaded with fuel or moisture Fuel filler cap loose, cross-threaded, incorrect part or damaged Fuel tank is cracked (leaking), or a leak exists in the 'O' ring Fuel tank pressure sensor is damaged or has failed Fuel vapor line(s), fuel pipes or hoses damaged or leaking PCM has failed

May 09, 2012 | 2000 Mitsubishi Montero Sport

3 Answers

Do I have to drop the fuel tank to replace the fuel pump on a 94 Buick le saber


Yes ,,instructions are below, Use eye protection for this procedure
Remove or Disconnect:

  1. Relieve Fuel Pressure
  2. Disconnect negative battery cable
  3. Raise vehicle on hoist
  4. Remove Fuel Tank
  5. Remove Fuel Gage sending and pump assembly by turning cam lock ring counterclockwise. Lift assembly from fuel tank and remove fuel pump from fuel gage sender unit.
  6. Disconnect pump wires, hose clamps, and clamp around pump body
  7. Pull pump assembly out of rubber connectors
  8. Inspect fuel pump attaching hose for any signs of deterioration. Replace as necessary.
Install or Connect:

  1. Push fuel pump assembly into attaching hose
  2. Connect pump wires, hose clamps at attaching hose and around pump body
  3. Place Fuel tank sending unit and pump assembly into tank using new O-ring
  4. Place cam lock over assembly and lock by turning clockwise
  5. Install Fuel Tank
  6. Start engine and check fuel pipe connector for visual leaks

Oct 20, 2010 | 1994 Buick LeSabre

1 Answer

LOCATION OF FUEL FILTER 1999 BUICK PARK AVE


It's on the left hand frame rail, in front of the left rear tire.
107125379

  1. Relieve the fuel system pressure.
  2. Raise the vehicle.
CAUTION: Refer to Caution in Cautions and Notices.

  1. Remove the quick-connect fitting at the fuel feed pipe (3).
  2. Remove the threaded connection (2) at in-line fuel filter.
IMPORTANT: Inspect the O-ring on fuel filter outlet pipe for cracks or damage. Replace as required.

  1. Inspect the fuel lines, O-rings for cuts, swelling, cracks, and distortion. Replace the lines as required.
  2. Inspect the fuel return line (4).
  3. Inspect the fuel vent pipe (1).
  4. Drain any remaining fuel into an approved gasoline container.
  1. Remove the protective caps from the new in-line fuel filter.
  2. Install the new plastic connector retainers on the in-line fuel filter inlet and outlet.
Install the new plastic connector retainers in the same position as on the old in-line fuel filter.

  1. Install the quick-connect fitting (3) at the inlet of the in-line fuel filter.
IMPORTANT: Make sure that the O-ring is installed on the outlet pipe before installing the pipe

  1. Install the threaded connection (2) at the in-line fuel filter.
Tighten
Tighten the in-line fuel filter outlet nut to 30 N.m (22 lb ft) using a back-up wrench in order to prevent the nut from turning.

  1. Lower the vehicle.
  2. Tighten the fuel tank filler pipe cap.
  3. Install the negative battery cable.
7.1. Turn the ignition switch ON for 2 seconds . 7.2. Turn the ignition switch OFF for 10 seconds . 7.3. Turn the ignition switch ON 7.4. Check for fuel leaks.


Oct 20, 2010 | 1999 Buick Park Avenue

2 Answers

My fuel pump went out again in my truck. I had it done the first time and was told it was quite the chore. This time I don't have the 600$ to have it done again so I'm going to try it myself. I need a...


Fuel Pump Removal & Installation Main To Remove:
  1. Disconnect battery negative cable.
  2. Relieve fuel system pressure.
  3. Raise and safely support vehicle.
  4. Remove fuel tank.
  5. Remove fuel sender assembly by turning cam lock counterclockwise. gm-04-00-954.gif

  6. Remove fuel sender assembly from fuel tank.
To Install:
  1. Using NEW O-ring seal, Install fuel pump sender to fuel tank.
  2. Install cam lock assembly and turn clockwise to lock.
  3. Install fuel tank.
  4. Cycle ignition switch OFF and OFF and check for fuel leaks.
Balance 7.4L To Remove:
  1. Disconnect battery negative cable.
  2. Relieve fuel system pressure.
  3. Disconnect electrical connector.
  4. Clean both fuel pipe connections and area surrounding fuel pump to avoid contamination of fuel system. gm-05-74-997.gif

  5. Disconnect fuel pipes at fuel pump.
  6. Slide fuel pump out of bracket.
To Install:
  1. Install NEW O-ring seals on fuel pipes.
  2. Position pump in pump bracket.
  3. Connect fuel feed and suction pipes to pump.
    • Torque to: 22 ft lbs. (30 Nm).
  4. Connect electrical connector.
  5. Connect battery negative cable.
  6. Cycle ignition switch OFF and OFF and check for fuel leaks.
prev.gif next.gif

Oct 13, 2010 | 1997 GMC Sierra

1 Answer

How do I remove fuel pump off 01 olds silhouette. Dropped the tank down already


2001 Oldsmobile Truck Silhouette 3.4L SFI 6cyl
Fuel Pump - Removal & Installation
  1. Before servicing the vehicle, refer to the Precautions Section.
  2. Properly relieve the fuel system pressure.
  3. Drain and remove the fuel tank from the vehicle
  4. Remove or disconnect the following:
    Negative battery cable Quick-connect fittings at the fuel pump Fuel pump locking nut with a Fuel Pump Spanner Wrench J 39348 Fuel pump assembly from the fuel tank and discard the O-ring
To install:
  1. Install or connect the following:
    New O-ring on the fuel tank Fuel pump into the fuel tank making certain not to fold or twist the strainer and that it does not interfere with the full travel of the float arm Fuel pump locking nut with the scanner tool Quick-connect fittings at the fuel pump Fuel tank and fill the tank Negative battery cable
  2. Prime the fuel system as follows:
    1. Turn the ignition switch ON for two seconds.
    2. Turn the ignition switch OFF for 10 seconds.
    3. Turn the ignition switch ON and checks for leaks. Repair if necessary.


Fuel Pump/SenderRemoval & Installation
  1. Before servicing the vehicle, refer to the Precautions Section.
  2. Properly relieve the fuel system pressure.
  3. Disconnect the negative battery cable.
  4. Drain the fuel tank into an approved container.
    WARNING Do not attempt to straighten any kinked nylon fuel lines. Replace any kinked nylon fuel feed or return pipes in order to prevent damage to the vehicle.
    WARNING Do not attempt to repair sections of nylon fuel pipes. If the nylon fuel pipes are damaged, replace the pipes.
  5. Raise the vehicle.

    1edb6c2.jpg
    Fig. Showing the fuel tank assembly and related components
  6. Disconnect the fuel supply pipe (5) quick-connect fitting.
  7. Disconnect the evaporative emission (EVAP) purge pipe (6) quick connect fitting at the EVAP canister.
  8. Loosen the fuel tank filler pipe hose clamp.
  9. Disconnect the fuel tank filler from the fuel tank.
  10. Disconnect the vapor recirculation pipe from the filler tube.
  11. Remove the fuel tank shield.
  12. With the aid of an assistant, support the fuel tank.
  13. Remove the fuel tank strap attaching bolts.
  14. Disconnect the fuel sender and the fuel tank pressure (FTP) sensor electrical connectors at the body pass through.
  15. Remove the fuel tank from the vehicle.
  16. Remove the fuel sender assembly (3).

    f523c95.jpg
    Fig. Identifying the fuel sender assembly
  17. Disconnect the fuel sender electrical connections (3).
  18. Clean all of the fuel pipe connections, all of the hose connections, and all of the areas surrounding the connections before disconnecting the connections in order to avoid possible contamination of the fuel system.
  19. Disconnect the fuel supply pipe quick-connect fitting (4) at the fuel sender assembly.
  20. Disconnect the evaporative emission (EVAP) pipe quick-connect fittings (5, 6) at the fuel sender assembly.
    CAUTION Do NOT use impact tools. Significant force will be required to release the lock ring. The use of a hammer and screwdriver is not recommended. Secure the fuel tank in order to prevent fuel tank rotation.

continue...

Jun 23, 2010 | 2002 Oldsmobile Silhouette

1 Answer

How do i remove gas tank


NOTE Always maintain cleanliness when servicing fuel system components.
  1. Relieve the fuel system fuel pressure.
  2. Drain the fuel tank.
  3. Raise the vehicle.
  4. Disconnect the fuel tank wiring harness connector at the body pass through.
  5. For 3.4L engines, disconnect the quick-connect fitting at the inlet side of the in-pipe fuel filter.
  6. For 3.4L engines, disconnect the quick-connect fitting on the fuel return pipe, near the fuel filter.
  7. Disconnect the fuel tank evaporative emission (EVAP) pipe quick-connect fitting near the fuel filter.
  8. Remove the fuel feed, the fuel return, and the EVAP lines from the fuel pipe retainer.
  9. Remove the retaining nut for the EVAP canister bracket.
  10. Loosen the fuel tank filler pipe hose clamp.
  11. Disconnect the fuel tank filler pipe from the fuel tank.
  12. For 3.5L engines, disconnect the EVAP vent pipe near the fill pipe hose.
    NOTE Do not bend the fuel tank straps. Bending the fuel tank straps may damage the straps.
  13. With the aid of an assistant, support the fuel tank and remove the fuel tank strap attaching bolts.
  14. Remove the fuel tank from the vehicle and place the fuel tank in a suitable work area.
  15. If the fuel tank is not being replaced, go to the Installation Procedure.
  16. Disconnect the fuel tank wiring harness from the fuel sender assembly.
  17. Remove the fuel sender shield from the fuel tank.
  18. Disconnect the fuel feed and return pipe quick-connect fittings at the fuel sender.
  19. Disconnect the EVAP vapor pipe assembly from the fuel sender.
  20. Remove the fuel and/or EVAP pipe assembly from the fuel tank.
  21. Remove the fuel sender assembly.
  22. Remove the EVAP vent solenoid valve.
  23. Remove the EVAP canister.

To install:
  1. Install the EVAP canister.
  2. Install the EVAP vent solenoid valve.
  3. Install the fuel sender assembly.
  4. Install the fuel and/or EVAP pipe assembly.
  5. Connect the EVAP vapor pipe to the fuel sender assembly.
  6. Connect the fuel feed and fuel return pipes at the fuel sender.
    NOTE Use the correct fastener in the correct location. Replacement fasteners must be the correct part number for that application. Fasteners requiring replacement or fasteners requiring the use of thread locking compound or sealant are identified in the service procedure. Do not use paints, lubricants, or corrosion inhibitors on fasteners or fastener joint surfaces unless specified. These coatings affect fastener torque and joint clamping force and may damage the fastener. Use the correct tightening sequence and specifications when installing fasteners in order to avoid damage to parts and systems.
  7. Install the fuel sender shield to the fuel tank and tighten the shield nuts to 53 inch lbs. (6 Nm).
  8. Connect the fuel tank wiring harness to the fuel sender assembly.
  9. With the aid of an assistant, position and support the fuel tank.
    NOTE Do not bend the fuel tank straps. Bending the fuel tank straps may damage the straps.
  10. Install the fuel tank retaining strap attaching bolts and tighten the fuel tank retaining strap bolts to 35 ft. lbs. (47 Nm).
  11. Install the EVAP canister retaining nut and tighten the retaining nut to 53 inch lbs. (6 Nm).
  12. Connect the fuel tank filler pipe to the fuel tank and tighten the fuel tank filler pipe hose clamp to 22 inch lbs. (2.5 Nm).
  13. Connect the fuel feed pipe quick-connect fitting at the inlet side of the fuel filter.
  14. Connect the fuel return pipe quick-connect fitting near the fuel filter.
  15. Connect the fuel tank EVAP pipe quick-connect fitting near the fuel filter.
  16. Connect the fuel tank wiring harness connector at the body pass-through.
  17. Lower the vehicle.
  18. Add fuel and reinstall the fuel tank filler pipe cap.
  19. Connect the negative battery cable.
  20. Inspect for fuel leaks with the following procedure:
    1. Turn ON the ignition for 2 seconds.
    2. Turn OFF the ignition for 10 seconds.
    3. Turn ON the ignition.
    4. Inspect for fuel leaks.
Thanks for using FixYa - a 4 THUMBS rating is appreciated for answering your FREE question.

Apr 15, 2010 | 2001 Pontiac Aztek

2 Answers

How do you replace the fuel pump on a 2001 camaro


Camaro, Firebird, 1999 - 2002 Repair Guide
Fuel Pump - Removal & Installation

  1. Before servicing the vehicle, refer to the Precautions Section.
  2. Relieve the fuel system pressure.
  3. Drain the fuel tank.
  4. Clean the area surrounding the sender assembly to prevent contamination of the fuel system.
  5. Remove or disconnect the following:
    Fuel tank Fuel sender-to-fuel tank retaining ring Fuel sender from the fuel tank Fuel pump from the sending unit

    46aa2e5.jpg
    Fig. Fuel sender/pump assembly component identification
To install:
  1. Install or connect the following:
    NOTE The fuel pump strainer must be in a horizontal position and must not block the float arm travel.
    Fuel pump with new strainer onto the sending unit New O-ring in the tank opening groove New O-ring on the fuel sender feed tube
  2. Fold the strainer over itself and slowly position the sending assembly in the tank so the strainer is not damaged or trapped by the sump walls.
    Retaining ring Fuel tank. Torque the bolts to 33 ft. lbs. (45 Nm). Fuel filler cap Negative battery cable
  3. Turn the ignition switch to the ON position for 2 seconds, OFF for 10 seconds, then back to the ON position. Check for fuel leaks.

Hope this help (remember rated and comment this), good luck.

Mar 18, 2010 | 2001 Chevrolet Camaro

1 Answer

Where is the fuel pump in a 3.4 2000 chevy impala? is it hard to replace?


Please don't forget to rate!!!!

Pump is in the tank and here is the procedures to do the job:

Fuel Pump Removal & Installation To Remove:
  1. Relieve the fuel system fuel pressure.
  2. Drain the fuel tank from the filler neck as much as possible.
  3. Raise and safely support the vehicle.
  4. Loosen the clamp and remove the filler hose from the fuel tank.
  5. Disconnect the fuel and EVAP quick-connect fittings at the fuel tank.
  6. Remove the exhaust pipe hangers and allow the exhaust system to drop slightly.
  7. Separate the EVAP fresh air line at the splice.
  8. Remove the fuel tank shield.
  9. Support the fuel tank with a suitable jack.
  10. Remove the two bolts securing the fuel tank straps.
  11. Lower the fuel tank from the vehicle.
  12. Disconnect the electrical connectors from the fuel pump assembly.
  13. Clean the fuel pipe connections with compressed air to prevent contamination during removal.
  14. Disconnect the quick-connect fittings at the fuel sender assembly.
  15. Remove the fuel sender retaining ring and remove the fuel sender assembly. The modular fuel sender assembly will spring-up when the snap ring is removed.
To Install:
CAUTION
Be careful not to fold or twist the fuel inlet strainer when installing the fuel sender assembly, this will restrict fuel flow. Also, make sure the float arm is able to move freely.
  1. Place a new fuel sender assembly seal on the tank and install the fuel sender assembly.
  2. Holding the fuel sender in place and install the retaining ring.
  3. Connect the quick-connect fittings at the fuel sender assembly.
  4. Connect the electrical connectors.
  5. Place the fuel tank on a suitable jack and raise it in position under the vehicle.
  6. Install the fuel tank strap bolts. Tighten the bolts to 35 lb ft (48 Nm).
  7. Install the fuel tank shield.
  8. Connect the fuel and EVAP quick-connect fittings at the fuel tank.
  9. Connect the EVAP fresh air hose at the splice.
  10. Install the fuel tank filler hose to the fuel tank.
  11. Raise the exhaust and install the exhaust pipe hangers.
  12. Lower the vehicle.
  13. Add fuel and install the fuel filler pipe cap.
  14. Connect the negative battery cable.
  15. Perform the following to pressurize the fuel system;
    • Turn the ignition ON, for 2 seconds.
    • Turn the ignition OFF, for 10 seconds.
    • Turn the ignition ON.
  16. Inspect the fuel system fuel leaks.

Jul 16, 2009 | 2000 Chevrolet Impala

Not finding what you are looking for?
2000 Harley Davidson FLHTCUI Electra Glide Ultra Classic Logo

122 people viewed this question

Ask a Question

Usually answered in minutes!

Top Harley Davidson Experts

Arnie Burke
Arnie Burke

Level 3 Expert

4536 Answers

Mike

Level 3 Expert

4340 Answers

yadayada
yadayada

Level 3 Expert

76673 Answers

Are you a Harley Davidson Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...