Question about 1983 Honda GL 1100 Aspencade Gold Wing
My Honda GL 1100 Aspencade has power to the speaker and an antenna, but my radio stations on the dash won't light up (neither will my clock) and I can' get any reception. I have power, and lots of fuzz, but not connection.
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
There are several possibilities. First, if the clock and cassette door are affected, it is a low voltage feed issue.. bad connectors, corroded terminals, etc. This voltage feed is from the 5 amp fuse in the very bottom of the relay box to the right of the main fuse block (i.e. not in the main fuse box).. clean check this fuse... If the low volume is FM only, it is internal to the radio.. in this case, another symptom is that the search/seek feature never locks on a station.. Typically this is a problem with a component on the board.. only place I know that works on them is Sierra Electronics in Troy Ohio, but others probably exist..
Posted on Apr 24, 2009
(Better1969) is correct. I just bought a 1983 Aspencade and there was no sound to my speakers. The gentleman I bought the bike from supplied new speakers but I quickly ruled that out. There are 3 fuse links behind the left turn signal in the fairing. 1 was a 1 amp, 1 was a 2 amp and the blown fuse was a 5 amp. I didn't have a 5 amp so I put a 2 amp in its place. So far the sound is still working but my FM radio reception is very poor.
Posted on Aug 03, 2009
the key needs to be on to set the clock, and the radio may be set to headset or muted, Use the key to remove the radio clean contacts and try that.
Posted on Apr 21, 2010
SOURCE: how do I remove the
Center stand the bike,loosen the rear axel nut, take out the bolt, knock out the spacer , lift the caliper assembly out of the way and hang it by a wire, grab the wheel, and slide it sideways away from the final drive. The wheel should slide right off the spline of the final drive and roll out the back under the fender. If the wheel wont slide past the final drive let the air out of the tire. Be sure to coat the spline of the final drive with moly60 paste from your local Honda dealer when reassembling
Posted on Sep 05, 2010
Tips for a great answer:
Feb 07, 2013 | 1983 Honda GL 1100 Aspencade Gold Wing
Jun 18, 2012 | 1983 Honda GL 1100 Gold Wing
Feb 18, 2011 | 1983 Honda GL 1100 Innerstate Gold Wing
Oct 07, 2010 | 1983 Honda GL 1100 Aspencade Gold Wing
May 25, 2010 | 1983 Honda GL 1100 Aspencade Gold Wing
May 02, 2010 | 1983 Honda GL 1100 Aspencade Gold Wing
Nov 07, 2009 | 1983 Honda GL 1100 Innerstate Gold Wing
May 14, 2009 | 1986 Honda GL 1200 Aspencade Gold Wing
Apr 26, 2009 | 1998 Honda GL 1500 Aspencade Gold Wing
May 25, 2012 | 1983 Honda GL 1100 Aspencade Gold Wing
33 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: