Question about Motorcycles
Posted by Anonymous on
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
One the left-hand side of the bike (facing forward), there is cover plate just ahead of the drive shaft. Remove that cover (mine has 8mm bolts). The bleeder valve is under this cover. Go to an auto parts store and get a "one man bleeder kit" or if you have some plastic tubing that will fit over the valve, you can use that and a clean jar. Follow the instructions on the bleeder kit, or if you're using the jar and tubing, fill the jar about a quarter of the way with break fluid (use DOT4, but never DOT5!). Take the cover off the master cylinder up at the handlebars, place the tube over the end of the bleed valve (after loosening it a turn or two. Place the other end of the tube down in the break fluid in the jar. Work the clutch lever until you stop getting bubbles in the jar. Be sure to keep the fluid level up in the reservoir. Tighten the bleeder valve, remove the tubing, top off the fluid and replace the covers.
Be careful not to get brake fluid on anything. It will eat paint and mess up other things.
Posted on Feb 13, 2009
Tips for a great answer:
May 05, 2018 | 2001 Suzuki VS 800 Intruder
Mar 15, 2018 | 2000 Suzuki VL 1500 Intruder LC
Dec 20, 2017 | 2007 Suzuki Boulevard C90T
Sep 21, 2017 | 2000 Suzuki VL 250 Intruder LC
Jun 23, 2017 | 1995 Suzuki VS 1400 Intruder
Jun 10, 2017 | Suzuki Cars & Trucks
Jul 06, 2014 | Suzuki VS 800 Intruder Motorcycles
Jan 14, 2009 | 1993 Suzuki VS 800 Intruder
Jul 22, 2018 | Motorcycles
42 people viewed this question
Usually answered in minutes!