Question about Jinlun Motorcycles

Open Question

Jinlun 250 5

I have a 2012 jinlun 250 and the starter spins but will not crank

Posted by on

  • billy williams Apr 30, 2013


    can someone pleas help ive taken motor all apart and cantsee why its not cranking everthing i woking but starter just spins but starter i good had it checked first thing helllllpppppp please this is my first bike and it brand new so i dont see why its doing this

×

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a 2005 jinlun 125 i have replaced coil pack and still having a problem with very weak spark any help would be appreciated .


Hi, Bernard for more information about your question and valuable "FREE" downloads that you will need please click on the links below. Good luck and have a nice day.
Pioneer Nevada Owners Club
2005 jinlun 125 wiring diagram Google Search

Jun 05, 2016 | Jinlun Motorcycles

2 Answers

Why is the car not starting


not enough voltage in the battery to turn the engine over.

Sep 07, 2014 | 2011 Toyota Camry

4 Answers

Turn key get nothing jump starter and sylenoid just spins


i cant dope out that symptoms.

does it crank or not. be clear there.

no car starts (but my 6sp) if it dont crank.

on A/T cars cranking is a first thing. so does it.?

Solenoids do not spin, the stroke only , it a linear motion.

the Sol. moves the pinion and the main contactor switch only.



my guess is the Starter spins and the crank don\'t spin,

you hear the starter motor spin up, it sings. like bird.

that means the starter /solenoid are bad. (crude)

if the battery is good and or jumper starting off a running car.



It can just be a dirty starter pinion, clean it , repeat.

fixed many for this. i have.



battery cable lugs clean, and good. no green rust.

bad cable usually just make a loud THUNK sound. no spin.

Sep 02, 2014 | 2005 Jeep Wrangler X

1 Answer

2011 Jinlun 125 will not start


Hi, Kelly before testing any electrical component in the Starting System it is "IMPERATIVE" that you have a fully charged battery of 12.5 volts or more and be able to pass a proper "LOAD" test if necessary, you may have a preliminary reading of 12.5 volts or more but little or zero amperage, the battery is faulty and must be replaced. AGM type batteries fall into this scenario more so than lead-acid batteries.
1. Ignition Switch not in the "ON" position.
2. Engine Run Switch in the "OFF" position.
3. Check the battery terminals for damage or corrosion check the battery cables at "BOTH" ends for loose, corroded, or broken connectors, "INSIDE" and outside the cable harness, perform connector wiggle test and check cables with an ohmmeter.
4. Bank angle sensor needs a reset or is faulty.
5. FOB battery low or dead.
6. Faulty ignition switch.
7. Faulty starter button.
8. Faulty kickstand, clutch, neutral safety switch.
9. Security alarm needs a reset.
10. Starter relay, solenoid, starter motor or circuit wiring faulty.
11. Starter armature or field coils have failed.
12. Main fuse or circuit breaker may be blown or faulty.
13. Faulty ignition relay.
14. The electric starter is working but starter clutch has failed.
15. Check for engine trouble codes.
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
hyosung cruise 2 125cc not starting properly
Scooter Troubleshooting Scooter won start All about Scooters
http://www.family-motorsports.net/GY6-50cc-150cc.pdf
Jinlun parts
http://absolutelyscooterparts.net/pdf/CGEN_dawg_scooter_manual.pdf

Oct 07, 2017 | Jinlun Motorcycles

1 Answer

Jinlun 125-11


This post contains only PC desktop Post it in the correct platform

Mar 15, 2014 | Computers & Internet

1 Answer

I have 1996 grand caravan 3.8. I replaced the starter and it wont crank over, starter just spins


Do a voltage drop on the solenoid

You either don't have battery voltage or
two bad starters,or some flywheel issue

Nov 21, 2012 | Cars & Trucks

1 Answer

Car will not crank


Check battery voltage should be 12v. Have battery load tested. If good recharge, then with a voltmeter across battery terminals try to start engine. If battery voltage drops below 9.5v starter has failed.

Jun 08, 2009 | 1998 Pontiac Grand Am

1 Answer

My electric start dont work.!


The battery is the key. The starters are pretty durable so make sure you a using a charged attery with good contacts. Also, check the fuses, you may have a blown fuse that wil prevent you from turning the starter.

Apr 30, 2009 | 2004 Honda Honda Fusion

Not finding what you are looking for?
Motorcycles Logo

Related Topics:

43 people viewed this question

Ask a Question

Usually answered in minutes!

Top Jinlun Experts

adam bikedoc

Level 3 Expert

661 Answers

Andrew Taylor
Andrew Taylor

Level 3 Expert

19031 Answers

Brian McConnell

Level 1 Expert

6 Answers

Are you a Jinlun Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...