Question about 2003 Harley Davidson FLHT Electra Glide Standard

1 Answer

Starter stays engaged - 2003 Harley Davidson FLHT Electra Glide Standard

Posted by Anonymous on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    One Above All:

    The expert with highest point at the last day of the past 12 weeks.

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

  • Harley Davidson Master
  • 48,460 Answers

Hi Anonymous, first when checking anything in the starter circuit you must make sure the battery connections are clean and tight especially the negative cable at both ends and has a 12.5 volt or better charge. It must not fall below 9 volts during the cranking procedure with a volt meter hooked up. If it does fall below 9 volts do a proper load test on the battery and replace if necessary. Second replace the starter relay cheap $6 and make sure it's well grounded and getting 11.5 volts or better to activate. Third remove the back cover of the starter solenoid and de-arc/refurbish the contact plate and shoes making sure they are tight. If it still chatters replace the solenoid. Good luck

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/gregg_c0ec1df182c7330e

Posted on Jun 12, 2015

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Starter stays engaged


starter button on handlebar could be bad or stuck.

Apr 07, 2014 | 1995 Honda GL 1500 SE Gold Wing

2 Answers

When testing starter out of truck works fine, put starter in truck and under load starter stays engaged, rip


Either the solenoid is getting power when it should not be, or the starter drive is not aligned with the flywheel.

Jan 18, 2014 | Cars & Trucks

2 Answers

03 Oldsmobile Silhouette 3.4L Starter stays engaged at times.


Sounds like time for a new starter. While it could be electrical, in that the starter circuit is remaining engaged, more than likely it is mechanical. As the starter wears, you get play in the starter gear. Replacing the starter should take care of it. If you have recently had the starter off or replaced it, it could be misaligned, causing a similar problem.

Mar 27, 2010 | 2003 Oldsmobile Silhouette

1 Answer

F 150 starts and starter stays engaged unplug alternator starts ok but no charge


2 problems, first you have bad starter or starter relay for starter staying engaged, keep alt plugged in has nothing to do with starter staying engauged, to test starter relay, jump at relay bat + post with red/bk wire on solonoid, if cranks over without staying engaged, then not relay or starter but rather in your ign switch, ford had bad problems with ign switch some years ago doing that

Feb 05, 2010 | 2006 Chrysler PT Cruiser

2 Answers

Starter stays engaged after motor starts.


solenoid on starter is sticking and needs to be replaced or repaired

Oct 13, 2009 | 2002 Chevrolet Impala

1 Answer

Starter stays engaged


you need to tell us the make model and year of the vehicle and the kind of remote starter u have installed on the vehicle

Oct 09, 2009 | AutoCommand Remote Car Starter Add-On

1 Answer

97 fatboy starter engages but will not stay engaged.


I would check the starter clutch its self first. It is a one way clutch so if you remove the starter and disassemble it to the starter clutch and hold the starter clutch in one hand and use your other hand to turn the starter clutch gear, it should only turn in one direction.

Mar 30, 2009 | Harley Davidson Harley-Davidson Motorcycle...

Not finding what you are looking for?
2003 Harley Davidson FLHT Electra Glide Standard Logo

104 people viewed this question

Ask a Question

Usually answered in minutes!

Top Harley Davidson Experts

Arnie Burke
Arnie Burke

Level 3 Expert

4974 Answers

Mike

Level 3 Expert

4350 Answers

yadayada
yadayada

Level 3 Expert

80263 Answers

Are you a Harley Davidson Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...