Question about Motorcycles

Open Question

Yamaha grizzly 550 atv wiring diagram

Need tor rewire

Posted by Anonymous on


6 Suggested Answers

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

  • 11 Answers

SOURCE: has firing but wont start

check if its getting fuel and air, you need All 3 to make it run, if you have all of that (and going on the its firing concept) all that need to happen is fuel goes to carb, intake turns it to vapor, spark plug fires and ignites the fuel vapor and that causes the piston to go, so if its firing and all the above are good you should check the points and condensor, it should turn over for a few seconds and backfire if its not backfiring its likely not getting fuel, try to spray some ether(quik start or just some gas directly into the carb to see if anything hapens, You may need to take it to a shop or have friend with some mechanical background help ya. good luck Rotticus,
p.s. in the future be more specific and we can try to get more details for you, also google the bikes make and model and you should find some schimatics.

Posted on May 25, 2009

  • 3567 Answers

SOURCE: i dont know were to put the water in the radaitor

The filler is on top of the radiator on the left side of the bike, in front of the engine. Remove whatever fenders or cowlings are in the way to get access to the filler.
Can I get a “very helpful” rating on this answer?


Posted on Sep 02, 2009

  • 641 Answers

SOURCE: when i start the atv with the choke it stays on ,

The choke should only be used when starting cold. After the bike is warmed up you can turn the choke off. If it keeps shutting off after being warmed up for a few minutes, then check your gas/air ratio for the idle air mixture knob. Loosen it up 1/4 turn to allow more gas to flow.

Posted on Oct 20, 2009

  • 105 Answers

SOURCE: I am after a wiring diagram for a 2009 yamaha 350

hello, go to google put your question in and you should get all kinds of hits, for a wiring diagram, put make of bike year what size and problem, you will get a few hits, on that subject

Posted on Feb 25, 2010

  • 232 Answers

SOURCE: my yamaha atv grizzly 700

hi , solution is very easy : change the spark plugs to a "Hotter" plug . there is a difference in heat generated by spark plugs but you need to be very careful by not going too hot as it could burn the piston . Make sure you ask your bike dealer prior to fit any spark plug in your bike . This should solve your problem .

Posted on Jan 03, 2011

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Why isn't there any Yamaha Grizzly 550 choices to choose from on the Yamaha lists?

they probably regret ever making them :P no idea, go ask yamaha.

Oct 08, 2017 | ATVs

1 Answer

2005 Grizzly display not working only back light comes on. ATV running great. Checked fuses with meter and checked voltage at fuses O.K.

Yamaha atv manuals
Yamaha ATV repair manuals

Hey Bruce,
get one of these manuals..they have the wiring diagrams and some troubleshooting tips.. trace the wires using the wiring diagram...take your time.. you CAN figure it out!!!

Sep 13, 2017 | ATVs

1 Answer

How to locate IAT sensor on 2009 yamaha grizzly 550

IAT stands for intake air temperature, the sensor is going to be located in the air snorkel tube/box air cleaner or the tube before the carb/throttle body (usually has 3 wires, reference voltage, ground, sensor output)

May 08, 2014 | Grizzly Big Bear Atv Maintenance Free...

1 Answer


Put enough grease to cover the rollers. Also add some to the actual tracks where the rollers glide on. The clutch should have a thin cover that is held on by three small screws. that is your "grease cap" If there is too much grease it'll end up there. Hope this helps. I own older grizzlies and that is what has worked for me.

Nov 20, 2013 | Yamaha 2011 Grizzly 550 FI Auto 4x4 EPS

1 Answer

My 550 grizzly won't idle.seems to run out of gas.starts right up again then kills.can you help?

Clean Maf and check contact at TPS but all that should under waranty , take it to the dealer .

Nov 02, 2013 | Yamaha 2013 Grizzly 550 FI Auto 4x4 EPS

Not finding what you are looking for?
Motorcycles Logo

Related Topics:

133 people viewed this question

Ask a Question

Usually answered in minutes!

Top Motorcycles Experts

Arnie Burke
Arnie Burke

Level 3 Expert

4903 Answers


Level 3 Expert

79865 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

Are you a Motorcycle Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides