Question about 2007 kawasaki ZX-10R

Open Question

Noisy stator Battery keeps going flat, noisy stator.

Posted by on

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Washer no longer spins


if what you can provide what is the error code,,,?

Apr 02, 2014 | LG Washing Machines

1 Answer

Need to change stator and rotor assembly in WM2688H*MA


The stator is stationary mounted to the outer tub the rotor attaches to the spindle of the basket which is a shaft that goes thru a bearing to get a definitive answer remove the back panel remove the rotor turn the center bolt till it loosens keep going as this will back the rotor off the stator you will have to pull with a little effort strong magnets to get it off now try to spin the basket by hand if stiff you have a bad tub bearing.

Apr 02, 2014 | LG Washing Machines

1 Answer

For my honda cbr400, how does the stator affect the regulator rectifier? does it also affect the cdi in the process?


The stator is essentially an alternator (generator) that produces alternating current (ac). The rectifier converts the ac currect to direct current (dc). This dc currect is not very stable and is considered noisy. Alcohol, the voltage os proportional to the engine speed (rpms). Therefore a voltage regulator is added to keep the voltage at an acceptable level and not damage anything on the circuit (battery, radio, even headlights have a shorter life if too mush voltage is sent to them. If the stator is burned out (common on bikes from the early/mid 1980s, then there is no current produced and the battery ends up powering the system when you ride. The battery will eventually die and your bike will stop running. Hope this has what you need.

Jun 18, 2011 | Beta RR 400 Motorcycles

1 Answer

My whirlpool awz 7303 is very noisy. i think it is something to do with the drum going round. could the belt need tightening?


If your dryer is noisy, check these: Your dryers uses rollers or wheels to support the clothes drum. When these rollers are worn, they can be noisy. You should replace the whole set of rollers at the same time. Idler pulley your dryer has a tension or idler pulley that keeps tension on the main drive belt. When it's worn, it can be noisy. When that happens, don't lubricate it. Just replace it. Rear drum bearing assembly does not fail often in this type of dryer. There are videos of the testing and replacing of these parts at http://appliancehelponline.com/dryerrollervideo.html this will walk you thru the troubleshooting and replacement of these parts Blower wheel Your dryer's blower wheel pulls air over the heat source, through the clothes drum, and past the thermostats, then pushes it out the exhaust duct. This brings us to the last problem could be the blower wheel, which is usually plastic, may wear out over time.To check this grab the wheel and see if theres any play . But if it's noisy, it may simply be clogged with lint. Clean the blower and test to see if the dryer is still noisy. If it is, you need to replace it. If you need diagrams or illustrations of your specific model you can also enter your model # there. All parts come with installation instructions. Not all models are available.

Sep 13, 2010 | Whirlpool AWZ7303 Electric Dryer

2 Answers

Maytag mde3000ayw - this dryer makes a lot of scraping noise and squeaking. What could be the cause?


Hello there:
It's noisy If your dryer is noisy, check these: Rollers Idler pulley Glides Rear drum bearing Blower wheel Rollers Manydryers use rollers or wheels to support the clothes drum. When theserollers are worn, they can be noisy. You should replace the whole setof rollers at the same time. Idler pulley Dryershave a tension or idler pulley that keeps tension on the main drivebelt. When it's worn, it can be noisy. When that happens, don'tlubricate it. Just replace it. Glides Manydryers use nylon or plastic glides at the front of the clothes drum forsupport. When these are worn, they can be noisy. When that happens,replace them. Rear drum bearing Somedryers support the clothes drum in the rear with a center spindleinstead of rollers. The spindle may be a ball-and-socket type supportor a shaft through a sleeve. When the components are worn, they maysqueak, squeal, or rub. You can't repair them. Just replace them whenthey're worn. Blower wheel Yourdryer's blower wheel pulls air over the heat source, through theclothes drum, and past the thermostats, then pushes it out the exhaustduct. The blower wheel, which is usually plastic, may wear out overtime. But if it's noisy, it may simply be clogged with lint. Clean theblower and test to see if the dryer is still noisy. If it is, youprobably need to replace it.

Dec 25, 2009 | Dryers

1 Answer

My tumble dryer squeaks really loudly when its going and seems to be taking ages to dry - any idea?


Check the following:
  1. Idler pulley - It keeps tension on the main drive belt and when it is worn, it can be squeaky and noisy. Replace then.
  2. Glides - Attached to the front bulkhead of the clothes drum for support. When worn, it can be noisy and squeaky.. Replace then.
  3. Rollers or wheels - They support the clothes drum. When they are are worn, you should replace the whole set of rollers at the same time.
  4. Blower wheel - It pulls air over the heat source through the clothes drum past the thermostats, then pushes it out the exhaust duct. It may wear out over time. If it is noisy, it may be clogged with lint. Clean the blower and test to see if the dryer is still noisy. If it is, you need to replace it.

Oct 27, 2009 | Hotpoint Dryers

1 Answer

Noisy diff


diff bearings on way out jack both rear wheels off the ground --turn them by hand good chance you will pick up which side and how bad but it wont keep going for long the longer you leave it the more parts could get damaged

Jul 29, 2009 | Ford F Cars & Trucks

1 Answer

Dryer makes noise when turning like bearings going or belt squeek


Hi,
check the following -
It's noisy
If your dryer is noisy, check these:

Rollers
Idler pulley
Glides
Rear drum bearing
Blower wheel

Rollers
Many dryers use rollers or wheels to support the clothes drum. When these rollers are worn, they can be noisy. You should replace the whole set of rollers at the same time. 


Idler pulley
Dryers have a tension or idler pulley that keeps tension on the main drive belt. When it's worn, it can be noisy. When that happens, don't lubricate it. Just replace it. 


Glides
Many dryers use nylon or plastic glides at the front of the clothes drum for support. When these are worn, they can be noisy. When that happens, replace them. 


Rear drum bearing
Some dryers support the clothes drum in the rear with a center spindle instead of rollers. The spindle may be a ball-and-socket type support or a shaft through a sleeve. When the components are worn, they may squeak, squeal, or rub. You can't repair them. Just replace them when they're worn.


Blower wheel
Your dryer's blower wheel pulls air over the heat source, through the clothes drum, and past the thermostats, then pushes it out the exhaust duct. The blower wheel, which is usually plastic, may wear out over time. But if it's noisy, it may simply be clogged with lint. Clean the blower and test to see if the dryer is still noisy. If it is, you probably need to replace it.

good luck.....

Mar 28, 2009 | GE WSXH208A Front Load Washer

Not finding what you are looking for?
2007 kawasaki ZX-10R Logo

Related Topics:

18 people viewed this question

Ask a Question

Usually answered in minutes!

Top kawasaki Experts

Arnie Burke
Arnie Burke

Level 3 Expert

4521 Answers

yadayada
yadayada

Level 3 Expert

76164 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Are you a kawasaki Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...