Question about Motorcycles

Open Question

How to adjust carby float level on gq patrol 4.2

Posted by Anonymous on

3 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 11 Answers

SOURCE: Carbies willn't set float level,right floods,left sets to low

I don't know if its any help but I've fixed my Honda with similar problem. It turns out I reassembled the rich carbys air cut off valve incorrectly. Have you checked yours? I'm wondering if the cut off valves somehow affect the other parts of the carbys. Mine is running sweet now.

Posted on Apr 24, 2009

  • 47 Answers

SOURCE: 1985 Kawasaki GPZ600 carby flooding engine when

sounds like the float level is set to high and it is laeking out the over flow. try adjusting float level.

Posted on Mar 24, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Got 308 v8 in nissan patrol running 600 cfm holley running to rich is carby to big


get it jetted right and it will probably pass
308 would work best on a 450 -550 holley
running rich could be
float levels too high
excessive fuel pressure --use a regulator in the fuel line
damaged power valve diaphragm-- subject to burning holes in the diaphragm on back fires
the idle mixture screws incorrectly adjusted
there are speed shops with chassis dynos that will be able to tune the carby correctly so talk with them about the carby size and the problem

Dec 31, 2016 | Nissan Cars & Trucks

1 Answer

Hi my name is Sarah I just bought a 07/94 GQ NISSAN PATROL and I'm trying to find the engine number so I can register it can u help


No cannot help with that Sarah but if you go to one of the Nissan Patrol Forums and ask I am sure one of the guys there will help you out .
Try this one to start with in the link below and see how you go......................

Nissan Patrol GQ Y60 Ford Maverick

or this one

NissanPatrol com au Forum

Dec 15, 2015 | Nissan Cars & Trucks

1 Answer

Nissan electrical problems


Is the fuel pressure OK when this happens? Has the exhaust been tested for excess back pressure or a plugged catalytic converter?

Jan 06, 2014 | Cars & Trucks

1 Answer

My nissan patrol 88 gq won't start after sitting


there is a filter in the injector pump, under the inlet line. could be blocked.

also try cracking the injector line and cranking the car to bleed the lines.

Sep 30, 2012 | Cars & Trucks

2 Answers

Have1989 nissan hardbody and carbarator runs a steady stream of fuil when trying to crank doesnt stop. Whats wrong


Hi, the likely problem is a stuck float valve. If you tap with a small hammer on the carburetor float bowl near where the fuel line attaches, you may be able to reseat the valve, at least temporarily. As a long term solution, I would rebuild the carburetor. In the process, you would get a new float valve. Please let me know if you have more questions, and thanks for using FixYa.

Apr 02, 2011 | Nissan Hardbody Cars & Trucks

1 Answer

I would like the float hieght setting for the carburettor, many thanks, chris willie


Hi Chris, usually you flip the carby so the float is upside down and the needle is on the seat, then you make sure it is level with the base of the carby, if you are adjusting it because fuel is overflowing when bike is not running than check your needle and seat and give carby a good blow out, floats these days are usually pretty good and do not need adjusting unless they have a pin hole (very rare) than you replace it!! It you need to adjust it than very carefully you bend the tab where the needle sits with a good pair of long nose pliers.

Feb 14, 2011 | Daelim VT 125 Evolution Motorcycles

1 Answer

Replaced diaphram fuel valve and carbs ..cannot open fuel valve all the way without flooding engine. Excess fuel poars from carb assembly. Could there be some sort of problem with the vacuum system that...


I would say the problem is in your carbys, with the float levels, or a sticky needle and seat. If you open the fuel valve, fuel will flow into the carbys, ans shut off once the correct level is reached. I think the problem is in your carbys, not the fuel valve. I would remove the carbys, take the bowel off the bottom, and check the needle and seat, and float levels. It is not recomended to change the float levels from standard.

Apr 27, 2010 | 1993 kawasaki VN 750 Vulcan

1 Answer

1985 Kawasaki GPZ600 carby flooding engine when


sounds like the float level is set to high and it is laeking out the over flow. try adjusting float level.

Mar 23, 2010 | 1987 kawasaki GPZ 500 S - GPX 500 R

1 Answer

Carbies willn't set float level,right floods,left sets to low


I don't know if its any help but I've fixed my Honda with similar problem. It turns out I reassembled the rich carbys air cut off valve incorrectly. Have you checked yours? I'm wondering if the cut off valves somehow affect the other parts of the carbys. Mine is running sweet now.

Apr 13, 2009 | 2001 kawasaki ER-5

Not finding what you are looking for?
Motorcycles Logo

Related Topics:

29 people viewed this question

Ask a Question

Usually answered in minutes!

Top Motorcycles Experts

Arnie Burke
Arnie Burke

Level 3 Expert

4514 Answers

yadayada
yadayada

Level 3 Expert

75117 Answers

kakima

Level 3 Expert

102366 Answers

Are you a Motorcycle Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...