Question about 2007 Hyosung Sense SD50
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: hyosung avitar 650 wont stay
Maybe this will help. This is a common problem that I have had with my GV250. Almost the same bike mechanically by Hyosung.
If the battery is low on charge and you are lucky enough for the bike to start. As per normal when first started it revs higher because the bike is cold, this turns the alternator fast to give you the electricity you need to keep the bikes computer working properly. Bike will warm up and revs drop down, alternater not turning as fast, not as much electricity being made. Bike will either stall or rev up and down irradically to try to produce its own electricity. This will occur when the battery charge is low and bike is at low revs, for example when you slow down for traffic or you stop.
If this is your problem. To resolve it when you are out on the road, keep the revs up, twisting your throttle gently when you are going slow or stopped. Give the bike a good long run on the open road to give the battery some charge from the alternator.
Make sure your battery is maintained. If you dont use your bike for a while it will lose charge just sitting there doing nothing. Give the battery a good deep cycle charge or take the bike for a good long open road ride.
Posted on Jun 02, 2011
Tips for a great answer:
Mar 14, 2017 | 2012 Hyosung GT 250
May 07, 2014 | Motorcycles
Jul 05, 2017 | 2007 Hyosung Avitar GV650
Jun 26, 2011 | 2008 Hyosung Sense
Mar 22, 2011 | 2005 Hyosung GT 250
May 31, 2017 | 2005 Hyosung GT 650
Apr 14, 2015 | Hyosung GV 250 Aquila Motorcycles
43 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: