Question about Harley Davidson Motorcycles
Wheel bearings were flogged out. i have heard there is a fault with the seals does anyone know how to fix this
Hi Wayne, take a ride or drive over to your local dealers service/parts department, I'm sure they will be happy to take your Harley Davidson for a test ride if necessary and offer professional advice and assistance concerning your issue. Have a nice day.
Posted on Jun 14, 2015
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
I might have the right size internal bearing puller at work. It looks a little like this... but uses a threaded bolt instead of a slide hamer.
Posted on Nov 10, 2008
SOURCE: Front wheel bearing removal.
The bearings get punched out of the hub evenly. Just take a small to medium sized hammer and a large punch and drive the old bearings outward from the center of the hub. Install the new bearings somewhat more gently than the old ones came out. The bearings must go into the hub straight. Tap them in with a plastic hammer. Once the bearing is started, place the old bearing on top of the new one and strike around the outer rim of the old bearing to seat the new bearing.
Go to this site to download a free PDF service manual. Your bike is on the list of manuals. See page 71.
Please take a moment and rate this answer as a Fix. Thanks!
Posted on Apr 12, 2009
SOURCE: replace front wheel bearings
the link below is the parts catalogue for your bike. page 47 and 48 includes an EXPLODED view of the front wheel assembly. actually of all the parts.
hope this helps you out buddy.
Posted on May 04, 2009
Go to the site below where you can see a parts diagram for your specific bike. You will select the actual brand, year, model, etc., once you go to the site. Part numbers and prices are also shown. You can order parts from this site. In the event no price is shown on a particular part, the part is not in stock. www.babbittsonline.com/pages/parts/viewbybrandand/parts.aspx
Go to the "FRONT WHEEL" tab then enlarge the image if needed. This will show the construction of the assembly. It sounds like you have a good handle on the repair. Remove each bearing from the opposite side. Yes , just drive the bearings out with a rod smaller than the axle.
I don't get paid for my answers but I do take pride in them, and I am only trying to help. So if you will, > > > > A “very helpful” rating for this answer? Thanks!
Posted on Jun 14, 2009
Tips for a great answer:
Mar 15, 2016 | 1994 Ford Crown Victoria
Jun 14, 2014 | 2006 Suzuki Verona
Dec 12, 2013 | 1998 Toyota Tacoma
Apr 21, 2013 | Harley Davidson Motorcycles
Jun 23, 2012 | Harley Davidson Motorcycles
Mar 29, 2012 | 2010 Benelli Tornado Tre 1130
Apr 09, 2010 | 2003 Ford Explorer Sport Trac
69 people viewed this question
Usually answered in minutes!