Question about 2001 Suzuki GSF 1200 Bandit S

1 Answer

2001 Suzuki GSF 1200 Bandit S when idling and at low speeds makes clicking sound

When idling and at low speeds, my 2002 Suzuki Bandit 1200 makes a clunking or clicking sound. The bike runs great otherwise and has full power and no hesitation as I accelerate. I don't know if this sound Is a symptom of something serious or if it's no big deal. The sound is off and on, some days are worse than others. I haven't been able to find where the sound comes from... Might be the carbs?

Posted by Anonymous on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Suzuki Master
  • 43,050 Answers

Hi, Anonymous I would love to help you with your engine or chassis noise but I just loaned my brand new pair of listening ears to your local dealer's chief technician so he could take your bike for a test ride and give you his professional opinion and estimate about your noise and repair cost. If you are a little short on "DRACHMA" and a Dealership is not on your list of fun places to visit then perhaps the list below will help soothe your worried mind so you can make an informed decision.
1. Bearings---SCREECH
2. Belts---CHIRP
3. Brake Rotors---BUZZ
4. Rear Chains---RATTLE
5. Cam Chains---CLICKIT
6. Clutches---CHATTER
7. Cylinders---PING
8. Fairing Panels---WHISTLE
9. Fronk Forks---Plunk
10. Gears---WHINE
11. Head Gasket---HISS
12. Hydraulic Lifters---TAP
13. Pistons---SLAP
14. Radiators---GURGLE
15. Rear Chains---RATTLE
16. Rear Shocks---SQUEAK
17. Relays---CLICK&BUZZ
18. Shaft Drives---WHIRR
19. Shifting Trans---CLUNK
20. Solid Lifters---TICK
21. Starters---CLICK
22. Connecting Rods Go---KNOCK-KNOCK---who's there, it's me "*****"
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
http://forums.banditalley.net/suzuki-bandit-600-thru-1200-airoil-cooled-technical/crazy-clickingticking-soud
idle clicking sound strange noise when rolling
Suzuki GSF1200S 2001 Service Manual
OEM parts for Suzuki
http://mybikemanuals.com/suzuki

Posted on Aug 07, 2017

Ad

2 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 1 Answer

SOURCE: 83 suziki GS450 idle issues

the problem with the rubber was close but on the gs450 there is a metal insert that even if the rubber was rotted away the metal seals aginst the head so it cant leak. the problem is on the gs 450 suzuki used a cheap throttle cable that kinks behind the gas tank and kinks at the bend to the crabs under the set and the throttle system is a pull only not a dual cable pull push to always close the throttle. if you start the bike a wiggle the bend in the cable that comes out from the twist grip you will see it changes the idle. with either your finger or a screw driver and push the plate down on the carbs that the cable connects too. if the idle drops this conforms your problem. order a new cable from dennis kirk they have the revised one that has metal adjustment screw and metal clip in. better jacket casing as well.

Posted on Sep 29, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to install suzuki gsf 600 bandit tail light


Hi, Lin for this scenario you will need your service, parts fiche, and owners manual if you can't find the best tool you ever bought for your Suzuki, despair not, for a mere zero $0 you can download another one. For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
Suzuki GSF 600 1200 Bandit Clear LED Taillight Assembly
Suzuki bandit 1200s rear taillight bulb replacement and bulb
Suzuki GSF600S Service Manual
OEM parts for Suzuki
http://mybikemanuals.com/suzuki/suzuki-gs-owners-manuals

Sep 16, 2017 | 1998 Suzuki GSF 600 N Bandit

1 Answer

How do i adjust the tps sensor, and how do i set my meter up


you will need a factory service manual from suzuki. should be around 75 bucks at the suzuki dealer

May 19, 2014 | 2002 Suzuki GSF 1200 Bandit S

1 Answer

1990 Suzuki GSF 400 Bandit will not idle


Hi, Anonymous check your idle circuit passages for contamination also you need to make sure you have no intake leaks by spraying some Brake Kleen, Contact Cleaner, Starting Fluid etc. around the intake manifold and seals, if the RPM's go up or down significantly then you have a leak that needs to be fixed before you can continue with the carburetor adjustment.
The engine should be at operating temperature with the choke off to set the idle between 950-1050 rpm. Turn the idle skrew clockwise to increase the idle speed and counterclockwise to decrease the idle speed. If you have access to your air-fuel mixture skrew you may turn it as well, if not there is a video below on how to gain access, make sure you start with clean or new spark plugs. Gently turn the air-fuel mixture skrew clockwise until it starts to bottom out "STOP" do not over tighten as it will damage the taper on the end, now back the skrew out 1-1/2 full turns to establish a starting point start the engine and check the idle rpm's and turn the idle skrew accordingly for 950-1050 rpm if necessary, turn the air-fuel mixture skrew 1/4 turn at a time and let the engine settle for about 10 seconds, turn the skrew clockwise for a leaner mixture and counterclockwise for a richer mixture, you are seeking the highest rpm your air-fuel mixture skrew can acquire without going past 3 full turns from bottom then resetting the idle skrew back down to 950-1050 rpm If you can not detect any rpm change and can not stall the engine by turning the air-fuel mixture skrew all the way in then your pilot/low-speed jet is too big and needs to be replaced with the next size smaller. Final adjustment should be made with a clean air filter mounted to the carburetor.
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
http://forums.banditalley.net/suzuki-bandit-250-400/bandit-wont-idle-lags-1991-400cc
1991 gsf 400 suzuki bandit ignition and idle fixed
Suzuki GSF 400 BANDIT Service Manual
OEM parts for Suzuki
http://mybikemanuals.com/suzuki/suzuki-gs-owners-manuals

Oct 14, 2017 | 1991 Suzuki GSF 400 Bandit

1 Answer

1998 Suzuki GSF 1200 Bandit S fuel leaking through the fuel tap


Hi, Bigtim your fuel tap may be cracked try a new one for this scenario you will need your service, parts fiche, and owners manual if you can't find the best tool you ever bought for your Honda, despair not, for a mere zero $0 you can download another one. For more information about your issue and valuable "FREE" downloads that you will need for viewing and printing please click on the blue links below. Good luck and have a wonderful day.
Leaking gas valve letting fuel into your engine cases
Bandit fuel vac problem
Suzuki GSF1200S 2001 Service Manual
OEM parts for Suzuki
http://mybikemanuals.com/suzuki

Sep 04, 2017 | 1998 Suzuki GSF 1200 Bandit S

1 Answer

05 Bandit 1200S idles low, run rough at low rpms,


Try buying new diaframs for your carbs, because of the diafram and piston operation, if the diafram becomes weak due to heat from your engine, and by the diafram not beeing rigid enough, it hesitates to lift the needle out of the jet causing the lack of fuel at low tack/rpm when throttling up or accelerating slowly.

Jun 11, 2010 | 1997 Suzuki GSF 1200 Bandit S

1 Answer

Will not idle


the idle adjustment is between the centre 2 float bowls. Reach down under the carbs and u should find it

May 17, 2009 | 1998 Suzuki GSF 1200 Bandit S

Not finding what you are looking for?
2001 Suzuki GSF 1200 Bandit S Logo

Related Topics:

26 people viewed this question

Ask a Question

Usually answered in minutes!

Top Suzuki Experts

yadayada
yadayada

Level 3 Expert

76649 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

4536 Answers

Richard
Richard

Level 2 Expert

83 Answers

Are you a Suzuki Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...