Question about 2004 Harley Davidson FXDWG - FXDWGI Dyna Wide Glide
How do you change the headlight
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
your oil drain is on the right side pipe side of your bike look under near the rear back part of your frame you will see a plug with a one quarter allen key threaded plug style bolt kinda hidden in bridge plate of frame it is flat in conjuction with line on bike it is in area right behind where your back pipe expands to baffle of pipe where its skinny and then gets bigger its the one closest to you
Posted on Jun 09, 2009
not running for a year! You have a varnish buildup in the low end circuit of the carb. You will need to remove the carb and do a full teardown of the carb to properly rectify this problem. SOMETIMES we are able to free up the passages by putting SEA FOAM cleaner in the tank , fill her up with fresh fuel and ride through the tank and it will clear up. SEA FOAM can be purchased at an auto parts store and is sometimes very effective. 1/4 cup to full tank fuel.
Posted on Jul 14, 2009
You will need to purchase a service manual. P/N 99481-06A from Harley Davidson. Any dealer should be able to provide you with one for approximately $65.00.
Posted on Aug 10, 2009
remove the drain plug from the oil pan, you will need either a 3/4" box wrench or a 5/8" box wrench and the drain plug will be facing forward on the the oil pan. It is easiest to remove this drain plug from under the right side of the bike. put drain plug back in after about 10 m,inutes of drain time and tighten to 18 ft. lbs. Dont forget to change the oil filter as well.
Posted on Oct 28, 2009
Tips for a great answer:
May 17, 2014 | 2004 Harley Davidson FXDWG - FXDWGI Dyna...
Sep 18, 2013 | 2004 Harley Davidson FXDWG - FXDWGI Dyna...
Oct 15, 2012 | 2006 Harley Davidson FXDWGI Dyna Wide...
Sep 24, 2011 | 2004 Harley Davidson FXDWG - FXDWGI Dyna...
May 06, 2011 | Harley Davidson FXDWG Dyna Wide Glide...
Mar 24, 2011 | 2003 Harley Davidson FXDWG Dyna Wide Glide
Do not ever touch the quartz bulb with your fingers as fingerprints will etch the glass and cause the bulb to fail prematurely.
FXD, FXDL, FXDX Models
Loosen the trim ring clamp screw and nut, remove the trim ring, pull the connector block from the bulb prongs, remove the rubber boot from the back of the headlamp assembly, squeeze the wire retaining clip ends to unhook and release them from the from notches in the headlamp assembly, pivot the wire retaining clip away from the bulb aqnd then remove the bulb from the headlamp assembly.
FXDWG, FXDXT Models
Loosen the trim ring clamp screw and remove the trim ring, pull the wiring connector from the bulb prongs, remove the rubber boot from the back of the headlamp assembly, squeeze the wire retaining clip ends to unhook and release them from the notches in the headlamp assembly, pivot the wire retaining clip away from the bulb and remove the bulb from the headlamp assembly.
Install a new bulb and assemble the headlamp components in the reverse of the removal process. Align the headlight when it is fully installed. When reassembling the headlamp ensure that the slots and tabs in the headlamp, adapter ring, and trim ring are aligned.
Jul 12, 2010 | 2002 Harley Davidson FXDWG Dyna Wide Glide
Nov 17, 2009 | 2005 Harley Davidson FXDWG - FXDWGI Dyna...
Nov 24, 2017 | Motorcycles
138 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: