Question about 1993 Yamaha FZR 600
Hi, Kevin for more information about your question and valuable "FREE" downloads that you will need please visit the websites below. Good luck and have a nice day.
Yamaha FZR 600 carb diagram Google Search
step by step fzr600 carburetor rebuild
OEM parts for Yamaha
Posted on Mar 24, 2016
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
SOURCE: Carb Sync on an 01 YZF 600R
Here is a diagram showing the tubes you connect your vacuum gauges to.
The YZF600R is carbureted, so I do not know what you mean by throttle body adjustments.
Synchronizing carburetors means adjusting the throttle plates (butterflies) so that all cylinders are drawing the same amount of vacuum.
Here is a diagram of the carbs. Screw #31 is the screw used to change the sync.
Remember one other key point, all carbs are sync'ed to the #3 carb. You cannot change the vacuum (directly) on #3. It is usually best to start by syncing #2 to #3, then #4, then #1. Changing #2 can affect the sync on #1 so you definitely want to do 1 after 2 no matter what. If you have one cylinder WAY out of sync, that would be an exception to the previous rule where you would want to attempt to get that cylinder in the ball park of the others before fine tuning each cylinder.
Syncing the carbs is an alternating process between adjusting the vacuum then adjusting the idle. If they were out of sync, bringing them back in, or even getting close, can cause the idle to raise because the engine isn't fighting itself anymore. Always keep the engine idling @ 1100 rpm's while syncing.
Posted on Oct 05, 2009
SOURCE: FZR Manual Wanted
Try phpBB FZR250.com. Each section of the manual is listed but its in Japanese, aparently an English version was not produced. It is detailed and has torque settings. Hope this id helpful.
The Welsh Git.
Posted on Jan 03, 2009
Sounds like the bike has been doing wheeles and burnouts. As the clutch plates wear the cable needs adjusting. You have reached the end of the actuating cam. New plates are your best bet.
Posted on Jul 02, 2009
Tips for a great answer:
Jul 05, 2014 | 1993 Yamaha FZR 600
Jan 23, 2014 | 1990 Yamaha FZR 600
Apr 06, 2013 | Yamaha FZR 600 Motorcycles
May 03, 2011 | 1992 Yamaha FZR 600
Jan 11, 2011 | 1992 Yamaha FZR 250 R
Nov 03, 2010 | 1995 Yamaha FZR 600
Feb 17, 2010 | 1994 Yamaha FZR 600
Jul 02, 2009 | 1992 Yamaha FZR 600
Apr 26, 2009 | 1991 Yamaha FZR 600
272 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: