Question about 2010 Sym Joyride 125 Evo
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
If you hear a tapping noise from the gearbox then you have a broken gear tooth. Is the sound is present in all the gears or just in one or two gears? If the tapping is present in all gears then the busted tooth is on the clutch hub or the crankshaft drive gear. This is good because it is easier to fix than a broken transmission gear.
If the tapping is just in one or two gears then you will need to remove the engine for a complete tear down. In any event, ALWAYS replace gears in sets. Replace the broken gear and the gear that it meshes with. Don't replace both gears and you will soon wish you did. ALWAYS replace gears in sets.
Please rate this answer. Thanks!
Posted on Apr 20, 2009
If this happens in cold weather or after a fast run it's carb icing. SYM do a replacement carb bowl to solve this or you can use a fuel additive SILKOLENE Pro FST. I use the additive as it also keeps the fule system clean and lasts well.
Posted on Jul 03, 2009
I also own one (4 years old). Assuming it drives strongly enough at speed the problem will be your belt drive/variator transmission. If you are OK mechanic-wise remove the left side panel (you have to remove the small rear panel near the lights first) and then all the txmission case screws to have a look. If the belt is OK (and they last forever) it could be you need new roller weights in the front variator. They wear flat spots afet a couple of years that ruin acceleration. (Special tool needed - I made one though), or new clutch shoes in the rear variator - or maybe they are just sticking and need a good clean. Spin everything by hand to check for noise/slop/ wobbliness and check the oil in the tiny rear gearbox (see owners handbook. You need a measuring cup and a paint syringe to get the exact amount right.
If you aren't confident use a good bike garage. weights are inexpensive and probably clutch shoes too so if you can do any labour yourself it won't break the bank. Google for a free SYM Joyride workshop manual by the way. Happy scootering
Posted on Sep 09, 2009
,being a scooter it will be in your belt has streched or your rollers have flattened out .the rollers should be changed every 2500klms or so ,as they flatten out they take longer to reach the top of the variator(they have to try and slide not roll like there supose to)
your bike has no chain and sproket like the last answer said (and he calls himself an expert)if you look at http://www.youtube.com/watch?v=3yRskb0BYwE&feature=related it will show how a variator works
Posted on Jan 24, 2010
have you checked your belt ,also 3000 is about the limit i drive with my rollers unless i use the dr puller (sliders)they last alot longer .some rollers flatten out at about 1500-2000klms,the clutch could be worn or one of the springs could have failed(clutch or contra spring)that will give a rough ride ,1 more thing when you changed the rollers did you clean the variator and get rid of all the belt dust
Posted on Jan 24, 2010
Tips for a great answer:
Aug 07, 2017 | 2007 Sym Joyride 200
Jun 25, 2017 | 2007 Sym Joyride 200
May 15, 2017 | Sym Motorcycles
Nov 04, 2016 | Sym Motorcycles
Aug 03, 2016 | Sym Motorcycles
Jan 18, 2016 | Sym Motorcycles
Apr 03, 2015 | 2007 Sym Joyride 200
Jul 07, 2014 | 2007 Sym Joyride 200
Mar 10, 2017 | Sym Motorcycles
Jul 20, 2011 | 2011 Sym Joyride 200 RV
95 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: