Question about Motorcycles

Open Question

My 06 crf250r wont come down from high idle when i pull the throttle

It boggs on start up until it gets warm but when it gets too hot it wont come back down to idle....some say AIR LEAK,some say INTAKE VALVES,some say CARB JETTING......please help

Posted by on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad
sparksflyin
  • 47 Answers

SOURCE: Engine runs but wont idle!

set you carb adjustments at 1 1/4 and try that

Posted on Feb 08, 2009

Ad
  • 46 Answers

SOURCE: 2005 CRF450R Hard to start and wont idle

Hi
I would suggest that you have the valve clearances checked.

Also, check that the carb is clean. Pay particular attention to the PILOT JET as this opperates the idle circuit.

Jon

Posted on Mar 05, 2009

  • 3567 Answers

SOURCE: 04 exc 450 wont rev

Pull the slide and move the jet needle clip down 1 or 2 notches.

Posted on Apr 21, 2009

num1wrench
  • 14 Answers

SOURCE: bike idles, but with a little throttle it jumps to high rev and wont come back down to idle

You need to oil your cables first....They make a gadget to help you do this...it clamps around the end of the cable, and you spray oil into a provided hole for a spray nozzle tube...Then see if the cables are unstuck by turning the throttle grip back and forth for awhile....start it and see if that helped....if not you may need to replace the cable(s)...I doubt that the slide in the carb is hanging up...or valve.If this doesn't work notify me.

Posted on May 10, 2009

lsteward68
  • 331 Answers

SOURCE: Engine boggs down

either fuel filter or fuel pump...replace filter since its cheaper. 6-12 dollars at autozone

Posted on May 24, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

2008 yardman lawn mower 13.5 hp. has a high idle speed and does not slow down, need diagram for throttle control


Throttle cable should pull a SPRING, which pulls the governor, which pushes/pulls the carburetor butterfly valve.

Aug 12, 2014 | Yard Machines Garden

1 Answer

06 v-star 1100 when twisting throttle and then back to idle position it takes a while to idle back down or stays at high rpm


More than likely the carbs are plugged up(makes the no idle, popping from the intake or pipe and sometimes hard starting), and/or a vacuum line(s) Is loose/broken, and the carbs are probably out of sync (makes the high sticking idle/little to no idle). I have many article written about cleaning the carbs and fuel system. Get the carbs and fuel system cleaned out if you are not familiar with the process.

Nov 19, 2013 | 2006 Yamaha V Star 1100 Classic

1 Answer

Tmec/VIP moped will pull back on throttle then it will bogg down and die not carb just replaced


look inside the exhaust for carbon build up a restricted exhaust will do the t

Oct 14, 2012 | Cars & Trucks

1 Answer

V-Star 1100 high idle after warm up


Hi, Gordon and the usual suspects are:
1. Throttle cables improperly adjusted, pinched or need lubrication.
2. Idle adjusting screw needs to be backed off.
4. Air fuel mixture adjusted too lean start with 2 full turns.
5. Intake system air leak.
6. Fast idle choke ramp is not releasing.
7. Broken throttle return spring.
8. Damaged diaphragm or slide.
9. Faulty MAP, TPS, ATS, O2, sensors or wiring/connector
10. Multi carburetors not in sync.
For more information about your issue and valuable "FREE" downloads that you will need please click on the links below. Good luck and have a nice day.
high idle when engine is hot
http://www.starbikeforums.com/forums/49-v-star/896-high-idle-after-warm-up.html
Yamaha XVS1100 Service Manual
OEM parts for Yamaha
YAMAHA XVS1100 Owner Manual

Oct 02, 2012 | 2000 Yamaha XVS 1100 Dragstar Classic

2 Answers

Polaris Sportsman 90 - stalls


Is the choke in the on position? Have you warmed it up enough?

Sep 07, 2009 | Polaris ATV

1 Answer

I have a poulan pro trimmer, it wont stay running


First of all, YES. boggs is a word in my dictionary. Remove the muffler and carefully take it apart. Pay close attention as to how it comes apart because it is vary important it goes back the same way. you will probable find that it is clogged. If it is then remove the debree. If it isn't then you will have to adjust the fuel mixture screw. First start the trimmer, then let it run for a few minutes to warm up, then gently turn the screw a little bit at a time counter clockwise first, squeezing the throttle inbetween adjustments . If it starts to take off then fine tune it untile your happy. If it boggs worse then turn it clockwise.

But first check the muffler.

Good luck

Aug 05, 2009 | Poulan 25cc 2-Cycle Gas Powered String...

1 Answer

Engine boggs down


either fuel filter or fuel pump...replace filter since its cheaper. 6-12 dollars at autozone

May 24, 2009 | 1994 Ford Ranger Supercab

Not finding what you are looking for?
Motorcycles Logo

Related Topics:

119 people viewed this question

Ask a Question

Usually answered in minutes!

Top Motorcycles Experts

Arnie Burke
Arnie Burke

Level 3 Expert

4525 Answers

yadayada
yadayada

Level 3 Expert

76164 Answers

kakima

Level 3 Expert

102366 Answers

Are you a Motorcycle Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...