Question about Motorcycles

Open Question

Kawasaki zx 130 wont start, what replacement do i need for ignition coil

Posted by on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

rahmathadi
  • 1 Answer

SOURCE: kawasaki zx 130 service manual

https://rapidshare.com/#!download'533p10'4261377286'Kaze-ZX130.pdf'4170'0'0

Posted on Aug 30, 2012

  • 7 Answers

SOURCE: Kawasaki zx7 won't start

Hi. I had the same issues as what your saying. What we found was that the leads are a screw in into the spark plug cap. Unscrew the leads to the cap, trim the ends off by a mm or 2 and re-screw back into cap that goes onto spark plug. There renown for pulling out and giving weak or no spark.

Posted on Jul 07, 2009

  • 232 Answers

SOURCE: Kawasaki zx 6r, no ignition spark from plugs.

check your spark plugs leads
the CDI unit need to be tested for power and make sure that no wires are touching the frame as this could stop your ignition .
the cut off switch could be faulty too .
check all power sources around your motor as a wire could easely burned and earth itself .

Posted on Sep 27, 2009

mwoodring1
  • 496 Answers

SOURCE: TRYING TO INSTALL A AUTO START ALARM ON MY 2000

do you hear your fuel pump come on when you try it with your key fob

Posted on Jan 23, 2010

voodoomox
  • 1689 Answers

SOURCE: Where is the fuel filter on the kawasaki ZX-6R, I

look for the canister attached to the fuel pum, bottom side of the tank.

http://www.motorcycle-superstore.com/productimages/OG/0000-Mikuni-Pulse-Fuel-Pump.jpg

Posted on Apr 13, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2000 Kawasaki ZR-7 no spark


Hi, Jay and the usual suspects are:
1. Fouled spark plugs.
2. Severely discharged or a damaged battery should have 12.5 volts or more and be able to pass a proper "LOAD" test if necessary, you may have a preliminary reading of 12.5 volts or more but little or zero amperage the battery is faulty and must be replaced, AGM batteries fail in this scenario more so than lead acid batteries.
3. Check battery terminals for damage or corrosion, check the battery cables at "BOTH" ends for loose, corroded, or broken connectors, "INSIDE" and outside the cable harness, perform connector wiggle test and check cables with an ohmmeter if necessary.
4. Loose connection at ignition coil or plug between ignition sensor and module.
5. Spark plug cables in bad condition, shorting/leaking, spark plug cable connections loose check for spark leakage in the dark.
6. Faulty ignition coil or electronic control module.
7. Faulty pulse coil.
8. Faulty CKP, CMP, or BAS sensor.
9. Faulty ignition switch.
10. Tilt sensor needs a reset.
11. Security alarm failing to disarm needs reset
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
no spark at any plugs
http://www.zxforums.com/forums/zx-7r-forum/37540-1997-zx7r-no-spark-need-help.html
Kawasaki ZR 7S Service Manual
OEM Parts for Kawasaki
KAWASAKI ZR 7S Manual

Aug 12, 2017 | 2000 kawasaki ZR-7

2 Answers

1999 Kawasaki ZX-9R Ninja will not turn over


Test the battery, bike batteries can and do just go open and dead all of a sudden, have been stranded more than once, filled with gas and then no start nothing, no lights nothing.

May 20, 2017 | 1999 kawasaki ZX-9R Ninja

1 Answer

Im not getting any spark, what are some ways to troubleshoot spark on my ZX9


Hi, Jerome and the usual suspects are:
1. Fouled spark plugs.
2. Severely discharged or a damaged battery, should have 12.5 volts or better and be able to pass a load test if necessary.
3. Check battery terminals for damage or corrosion, check the battery cables at "BOTH" ends for loose, corroded, or broken connectors, "INSIDE" and outside the cable harness, perform connector wiggle test and check cables with an ohmmeter if necessary.
4. Loose connection at ignition coil or plug between ignition sensor and module.
5. Spark plug cables in bad condition, shorting, leaking, spark plug cable connections loose check for spark leakage in the dark.
6. Faulty ignition coil or CDI or electronic control module.
7. Faulty CKP, CMP, or BAS sensor.
8. Faulty ignition switch.
9. Tilt sensor needs a reset.
10. Security alarm failing to disarm needs reset
For more information about your issue and valuable "FREE" downloads that you will need please click on the blue links below. Good luck and have a wonderful day.
http://www.kawasakimotorcycle.org/forum/kawasaki-streetbikes-sportbikes/49265-zx9r-no-spark.html
How to diagnose no spark situation on motorcycle
Kawasaki Ninja ZX 9R Service Manual
OEM Parts for Kawasaki
Kawasaki Ninja Owners Manuals

Mar 17, 2017 | 2000 kawasaki ZX-9 R Ninja

1 Answer

After sitting for god knows how long. my ninja turns over but wont fire. starter fluid wont burn because there is no spark. what can i do to get it started? has hoaky wiring and busted ignition because...


Hi Pollack_zach, you need to drain and flush the fuel tank and carburetors then you need to clean up the wiring and for more information about your question please visit the website below. Good luck and have a nice day.
Kawasaki Ninja ZX 6R Service Manuals

Jul 23, 2011 | 2001 kawasaki ZX-6R Ninja

1 Answer

Blowing ignitor [cdi]


Hi, Gemmaj_p123 what is your ignition fuse doing, if your blowing CDI's then I would look for a short coming from the CDI on it's way to the coils, cracked or worn or chafed wiring for this scenario you will need your service/owners manual if you can't find the first and best tool you ever bought for your Kawasaki, despair not, for a mere zero $0 you can download another one.
For more information about your issue and valuable "FREE" downloads that you will need please click on the blue links below. Good luck and have a wonderful day.
Help fuse blows bike dies bad CDI
ignition fuse keeps blowing
Kawasaki Ninja ZX 6R Service Manual
OEM Parts for Kawasaki
Kawasaki Ninja ZX 6R Owner Manual

Apr 11, 2017 | 1999 kawasaki ZX-6R Ninja

1 Answer

Kawasaki ninja 636 won't start, removed seat and tank to replace battery. Engine turns over, but does not fire. Was started 2 months ago.


Hi and welcome to FixYa,

On your post "...does not fire..." initial checks would be for:
  • consistent IGN + 12 on the red wire going to all the ignition coils even when cranking;
  • pulsating voltage on the other wire of each ignition coil coming from the ECU when cranking.

Incidentally, if the bike has been sitting for 2 months, you may want to check quality of fuel and/or replace it. Further checks maybe required on the fuel delivery system. Try of a quick fix would be adding / spraying injector cleaner.

Good luck and thank you for asking FixYa.

Nov 14, 2009 | 2004 kawasaki ZX-6RR

1 Answer

Kawasaki zx 6r, no ignition spark from plugs. Coils get 12 v. it seems that cdi is working as griund seems to be cut when trying to star. I have checked the plugs against motor and frame.


check your spark plugs leads
the CDI unit need to be tested for power and make sure that no wires are touching the frame as this could stop your ignition .
the cut off switch could be faulty too .
check all power sources around your motor as a wire could easely burned and earth itself .

Sep 20, 2009 | 1995 kawasaki ZX-6R Ninja

1 Answer

Kawasaki zx7 won't start


Hi. I had the same issues as what your saying. What we found was that the leads are a screw in into the spark plug cap. Unscrew the leads to the cap, trim the ends off by a mm or 2 and re-screw back into cap that goes onto spark plug. There renown for pulling out and giving weak or no spark.

May 15, 2009 | 1997 kawasaki ZX-7R

Not finding what you are looking for?
Motorcycles Logo

Related Topics:

98 people viewed this question

Ask a Question

Usually answered in minutes!

Top Motorcycles Experts

Arnie Burke
Arnie Burke

Level 3 Expert

4514 Answers

yadayada
yadayada

Level 3 Expert

75822 Answers

kakima

Level 3 Expert

102366 Answers

Are you a Motorcycle Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...