Question about Motorcycles

Open Question

Assembley of davey water pump model 93106-0

What seals go where

Posted by Anonymous on

5 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 1 Answer

SOURCE: no water supply to house

i have a hs50-05t with a torrium controller it only works when you hold the prime button in

Posted on Aug 10, 2010

SOURCE: What's your problem? davey 500h pump going on and off in an short run

best solution?

post this where it belongs(not under Pc laptops)

Posted on Jun 20, 2012

ozepool
  • 21 Answers

SOURCE: Davey silensor sls200 pump is on but won't pump

More info required, call Bob 0243690299, I am qualified electrical and pool guy. Silensors are good although they have many parts due to being water cooled. My initial suggestion is replacement. You could post to me 35 A Davies St Kincumber 2251

Posted on Aug 13, 2014

  • 3519 Answers

SOURCE: Just posted re a pump that won't switch off/build up pressure...the model is a Davey pump 095S

Suggest you put this info as a comment on your original post

Posted on Oct 09, 2015

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to install a mechanical seal ?


I would suggest you try and find a schematic of the and go from there.
Here's a search for that pump
https://search.yahoo.com/search?ei=utf-8&fr=ytff1-&p=davey%20fire%20single%20impeller%20pumpfighter&type=
My experience with seals on those types of pumps(never done davies) is to remove the outboard housing--- then remove the impeller----take the nut off---then get a piece of brass or very hard plastic (buffer)-- put this on the end of the shaft---then hit it with a hammer---you will need help with this as someone to pull on the impeller while you strike the buffer---after that done, then remove the inside housing---find a socket or piece of pipe/tubing that the size of the seal and drive it out----depending on mfg the seal's removal usually it's is driven from the impeller side out of the inboard housing (some are opposite)---it's nice to have a press but not everybody has one in their cellar----make sure you clean and buff the shaft before reversing procedure careful not to hit cut or score new seal when installing it-- that's about the best I can do for you---it's like trying to cut hair over a telephone

Aug 11, 2014 | Plumbing

1 Answer

Davey Pump won't start


Some of those have a safety switch if low on oil they want start.

Jan 16, 2014 | Davey Crickett High-Pressure Twin Impeller...

1 Answer

Davey pump parts diagram


I would suggest using google and enter the make and model of your Davey pump and look for the manual.

Jan 02, 2014 | Plumbing

1 Answer

Davey pump parts diagram


Davey makes great pumps but they make more then one model. More information is needed such as model number.

Jul 17, 2013 | Plumbing

1 Answer

What's your problem? davey 500h pump going on and off in an short run


best solution?

post this where it belongs(not under Pc laptops)

Jun 19, 2012 | Computers & Internet

1 Answer

I have a davey torrium xj70t-0 which is leaking at the discharge end only when the pump is on. I figure it is the seal and have removed it to replace but it looks ok. Should I get a new one anyway or could...


If it's not the seal it may be a worn section on the shaft. If it was me and the seal wasn't to expensive I would polish down the sealing surface on the shaft and seat and replace the seal.Not knowing what pressures you are running at it doesn't take much wear on the seal to cause a leak. I hope this helps you and thanks.

May 20, 2011 | Plumbing

1 Answer

Leaking water from underneith the boiler from a black like plug which looks like its connected to the pump assembley


Possible bad mechanical seal in the circulator pump.

Does the boiler hold 15 to 20 psi while operating? You may need to shut off the makeup water to find out.

If its lossing pressure then you have a leak.

Aug 18, 2010 | Heating & Cooling

1 Answer

Water build up inside Headlight


The weather seal is shot. Replace the entire assembley but don't forget to reconnect the turn signal bulb BEFORE you reinstall the assembley into the car body!

Mar 28, 2009 | 2003 Toyota Highlander

Not finding what you are looking for?
Motorcycles Logo

Related Topics:

146 people viewed this question

Ask a Question

Usually answered in minutes!

Top Motorcycles Experts

Arnie Burke
Arnie Burke

Level 3 Expert

4514 Answers

yadayada
yadayada

Level 3 Expert

75077 Answers

kakima

Level 3 Expert

102366 Answers

Are you a Motorcycle Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...