- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Hi, Adam before testing any electrical component in the Starter Circuit it is "IMPERATIVE" that you have a fully charged battery of 12.5 volts or more and be able to pass a proper "LOAD" test because your battery may have 12.5 volts or more but little or zero amps causing the battery to be faulty and must be replaced, especially "AGM" batteries.
1. Ignition Switch not in the "ON" position.
2. Engine Run Switch in the "OFF" position.
3. Check the battery terminals for damage or corrosion check the battery cables at "BOTH" ends for loose, corroded, or broken connectors, "INSIDE" and outside the cable harness, perform connector wiggle test and check cables with an ohmmeter.
4. Bank angle sensor needs a reset or is faulty.
5. FOB battery low or dead.
6. Faulty ignition switch.
7. Faulty starter button.
8. Faulty kickstand or clutch pull in switch/sensor.
9. Security alarm needs a reset.
10. Starter relay, solenoid or starter circuit wiring faulty.
11. Starter armature or field coils have failed.
12. Main fuse or circuit breaker may be blown or faulty.
13. The electric starter is working but starter clutch has failed.
14. Check for engine trouble codes.
For more information about your issue and valuable "FREE" downloads that you will need please click on the blue links below. Good luck and have a wonderful day. It will not Start Technical Topics Washed my Moto Guzzi V7 won start https://www.manualslib.com/brand/moto-guzzi http://www.harpermoto.com/oem-moto-guzzi-illustrated-parts-catalog.html http://mybikemanuals.com/moto-guzzi
Hi, Anonymous and the usual suspects are:
1. Fuel tank empty.
2. Fuel supply valve/petcock turned off.
3. Fouled spark plugs.
4. Engine flooded as a result of overuse of the enricher.
5. Vacuum hose to the fuel supply valve/petcock disconnected, broken, cracked, or pinched.
6. Fuel valve/petcock or filter clogged.
7. Fuel line to the carburetor or throttle body pinched or kinked.
8. Carburetor float stuck.
9. Fuel injectors clogged.
10. Severely discharged or damaged battery you need 12.5 volts or better and be able to pass a load test if necessary.
11. Check battery terminals for damage or corrosion, check the battery cables at "BOTH" ends for loose, corroded, or broken connectors, "INSIDE" and outside the cable harness, perform connector wiggle test and check cables with an ohmmeter if necessary.
12. Loose or corroded wire connection at the coil, battery or plug between ignition sensor and CDI box.
Spark plug cables in bad condition and shorting check for leakage in the dark, cable connections loose, or connected to the wrong cylinders.
13. Ignition timing incorrect due to a faulty MAP, CKP, O2, TPS, sensors.
14. Faulty neutral, clutch lever, or kickstand safety switch.
15. Faulty fuel pump or fuse or relay.
16. Faulty CDI box.
17. A stuck bent or burnt valve.
18. Tip over sensor needs a reset.
19. Check for engine trouble codes.
For more information about your issue and valuable "FREE" downloads that you will need please click on the blue links below. Good luck and have a wonderful day. Help 1200 Sport won start when hot New 2012 Moto Guzzi Norge cranks but will not start only 3 miles on it http://www.guzzitek.org/gb/ma_us_uk/1200/Norge1200GT8V_2011Atelier(GB).pdf Spare parts catalogs exploded parts diagrams parts fiche http://mybikemanuals.com/moto-guzzi/moto-guzzi-uncategorized-owners-manuals
What do you mean adjust the display? I have a Norge and other than changing the display functions I am at a loss. You should be able to get these issues resolved in the manual. My Norge has a great owners manual that came with it.
Take a look at the starter solenoid. There are two larger wires, on the back. One from the battery positive, (main hot wire), the other goes to the starter motor (If you jump these terminals the starter will spin but will not engage the flywheel). Look at the wires and nuts on the solenoid, especially the starter motor side make sure they are clean and tight, have not gotten hot and started rusting. Also check the voltage on the solenoid wire, (smallest) wire from the start button. In some cases there is a voltage loss on this wire. Next time it will not engage the starter right away, make a jump from the main power battery terminal on the starter to the solenoid wire. If it starts right up every time, you need to add and wire in another relay to carry the voltage to the solenoid from the start button, (a relay to work the solenoid, lol). If that test does not work or help.. Tap on the starter motor with a hammer. if it catches and turns the engine then, the motor brushes are worn and need to be replaced.