Question about 2004 Harley Davidson FLSTC - FLSTCI Heritage Softail Classic

1 Answer

What does o/w mean in a 2001 heritage softail wiring diagram?

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 10 Answers

That is the abbeviation used for the color of the wire. Yours is an orange wire withe a white tracer line going around it. IMPORTANT*
Do not confuse o/w Orange with a white tracer line with w/o White with an orange tracer wire. The first letter in o/w will stand for the primary color of that wire, in this case Orange.. It will be a bit thicker width on that wire. The second letter, in this case White, will stand for the tracer color, look closely, the tracer line is thinner than the primary line. This is so you can more easily trace wires on your bike. There will be more combinations of colors used on your bike, but they will all follow the same rule. Primary color is the first letter and is wider or thicker/ Tracer line is the second letter and the line will be thinner than the primary.

Posted on Feb 12, 2014

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad
  • 23 Answers

SOURCE: REPLACINGTHE REAR TIRE ON A HARLEY DAVIDSON 2008 HERITAGE SOFTAIL

Down and dirty way - take it to the dealer and have them install a new tire....

The hard way: place bike on bike jack and remove rear wheel by removing the axle nut and drifting the axle out of the wheel. Derail the belt/chain and drop the wheel out of the brake caliper. Remove valve stem to deflate the tire. Get a set of tire spoons and a 12 pack of COLD brew cause working with tire spoons is no FUN! Pry the bead loose with one spoon and the work your way around the wheel prying the tire beed to the outside of the wheel. Repeat this process for the back side of the tire (in the same direction as the first side so the tire will come off the wheel. Reverse and repeat to install new tire.

By now you will be loading your wheel into the truck and heading to the HD shop. It just really isn't worth the hastle to save the $25 or so to have this job done.

Align wheel with new tire on it with the brake caliper so that you have one shoe on each side of the rotor (you may have to actually remove the caliper if your pads are thick. Install your belt drive/chain drive and then lift the wheel to insert the axle through the swing arm, the chain tensioner and wheel. Reverse
on the other side. Place axle nut on axle and torque to about 80lbs.

Good to go.

Posted on Aug 17, 2009

  • 1 Answer

SOURCE: how to reset alarm on heritage softail, bike wont

Set the alarm by holding the key fob button until you see running lights flash twice. Turn off the alarm by pushing the key fob button twice and the lights will flash once.

Posted on Aug 30, 2009

  • 31 Answers

SOURCE: How to wire a tach on 05 heritage softail

Locate & route Black lead to ground / 2004-later softail: On the frame strap under the seat directly in front of the battery.

Locate & route the pink lead to Signal / For 2004 & later FXST/C/I The #3 cavity in the connector {39b} on the back of the speedometer. The socket terminal on the signal (pk) lead fits the #3 cavity.

Locate & route the Orange and white lead to power / Ummm.. it's saying for 2004 and later to adapt to the fuse block For earlier [ For 1996 to 2003 softail: locate the power lead (o/w) in the tail lamp pin connector {7a} under the seat behind the right rear corner of he battery.] "here you are looking to run it to a fused line, not directly to power/battery" I hope this helped.

Posted on Sep 19, 2009

wd4ity
  • 4565 Answers

SOURCE: how to change oil for2007 heritage softail classic

The oil drain us usually a hose with a plug in it that is held by a clip on the frame. It us usually on the right hand side of the bike just behind and underneath the transmission side cover. Loosen the clamp and pull the plug out. The oil will run out of the tank. Replace plug and add new oil to the tank.

Posted on Sep 24, 2009

  • 12 Answers

SOURCE: Trailer Hitch Wiring for Motorcycle

take off the taillight trace the wires to the rear blinkers then also get the colors for the tail and brake under the taillight

Posted on Nov 26, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Removing rear fender on heritage softail 2001


Disconnect wiring. Remove ICM rrom the front of the fender , remove the 4 bolts holding the fender supports and remove the fender, with supports, from the frame

Aug 23, 2013 | 2000 Harley Davidson FLSTC Heritage...

1 Answer

94 heritage softail front running lights not working


Hi Anonymous, for a free wiring diagram please visit the website below and good luck.
Harley Davidson Wiring Diagrams and Schematics

Apr 14, 2013 | 2000 Harley Davidson FLSTC Heritage...

1 Answer

Wiring diagram for 2011 heritage softail


Hi Anonymous, for a free wiring diagram please visit the website below and good luck Harley Davidson Wiring Diagrams and Schematics

Dec 21, 2012 | 2011 Harley Davidson FLSTC Heritage...

1 Answer

How do i replace ignition switch on 2001 softail heritage bike


Hi Anonymous, for more information about your question please visit the website below. Good luck and have nice day.
Softail Ignition Switch Removal and Installation

Sep 05, 2012 | 2001 Harley Davidson FLSTC - FLSTCI...

1 Answer

Have a 99 heritage softail. Why does my right signal light start blinking ,on its own.


Hi Bill_mtz, probally because it wants too. No seriously you have either a faulty TS button/switch or a worn wire between the switch and the TS module or a corrupted connection at the wiring harness connector to the TS module or the module itself could be going south. For a free wiring diagram please visit the website below and good luck. Harley Davidson Wiring Diagrams and Schematics

Apr 03, 2012 | 2000 Harley Davidson FLSTC Heritage...

1 Answer

2007 heritage softail left turn signal problem


Hi Puckett9079, you could have a faulty module, check your wiring and connections from the turn signal switch to the turn signal module with a testlite. Make sure all connector pins are corroded, broken, or loose. For a free wiring diagram please visit the website below:
Harley Davidson Wiring Diagrams and Schematics
Have nice day

Aug 30, 2011 | 2007 Harley Davidson FLSTC Heritage...

1 Answer

Need wire diagram 1996 softail


Hi Mikebkmk, for a free wiring diagram please visit the website below and good luck.
Harley Davidson Wiring Diagrams and Schematics

May 13, 2010 | 2000 Harley Davidson FLSTC Heritage...

Not finding what you are looking for?
2004 Harley Davidson FLSTC - FLSTCI Heritage Softail Classic Logo

130 people viewed this question

Ask a Question

Usually answered in minutes!

Top Harley Davidson Experts

Arnie Burke
Arnie Burke

Level 3 Expert

4525 Answers

Mike

Level 3 Expert

4340 Answers

yadayada
yadayada

Level 3 Expert

76164 Answers

Are you a Harley Davidson Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...