Question about Motorcycles

Open Question

What is the float level on a 250 Suzuki 4wheeler

Posted by Anonymous on

3 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 5 Answers

SOURCE: Float level measurements

there should be a line on the float bowl, if not set the carbs upside down on a work bench get eye level set floats to where you can only see half start there ,if they over flow back off a bit GET A MEASUREMENT IF POSSIBLE oh you'll have to make a aux fuel cell if you dont want to pull on and off seems like some specs are tuff to find so do this hope this helps

Posted on May 01, 2010

  • 3567 Answers

SOURCE: carb flooding 1978 ts 250 suzuki trail bike, new

You only have three options as to what is wrong. Either the float is stuck, adjusted wrong or trash is not letting the float needle close fully. My bet is trash from the gas tank.

Posted on Jun 08, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My Kymco Venox 250 2012 has no top end power. Also what are the float levels (stats on kymco site F17.5 R19) Not able to get site stats


Hi, Ben sorry you can't find the first and best tool you ever bought for your Kymco despair not, for a mere $0 you can download another one. For more information about your issue and free valuable downloads that you will need please visit the websites below. Good luck and have a nice day.
RM 250 no top end power Suzuki 2 Stroke
Thread CR 250 lacks top end power
Kymco Venox 250
http://www.dailymotos.com/wp-content/uploads/2012/01/Kymco+Venox+250250i+EN.pdf

Feb 25, 2016 | Kymco Motorcycles

1 Answer

1996 750 katana suzuki how to set floats?


- Now days some carburetors are produced which are fixed and no adjustment is provided.The float is made up of whole plastic like material.
Some floats have the copper/metal notch for the adjustment of fuel level.
- Take the carburetor assembly out.
- Remove the fuel bowls.
- Place the carburetor assembly with the floats upward towards yourself.
- Float level gauge and active data list (taken from the workshop manual) is required to carry out the adjustment. But you can simply adjust the float level correctly without any gauge.
- Hold the carburetor assembly at your eye level in such a way that the carburetor No. 1 is in front of you. Behind is No. 2 carburetor, then behind is No. 3 and then the No. 4. Or we can say that the carburetor No. 1 hides the carburetors 2, 3, and 4.
- Examine carefully the floats of all the individual carburetors be parallel to the surface of the carburetor where the float bowl face is seated and tightened.
- Adjust the float level by bending the float notch towards the needle valve (to decrease the float level and to raise the float) or away from the needle valve to increase the float level (to lower the float).

Apr 16, 2015 | 1996 Suzuki GSX 750 F (Katana)

1 Answer

I have a suzuki ozark 250 and was wondering why the fuel from the fuel tank is going into the motor and air filter box


(1) float level could be set high (2) rings worn (3) bent valve (4) trash under float needle.

May 17, 2014 | Motorcycles

1 Answer

My 1993 Suzuki Intruder VS800 is leaking gas. We have changed carb floats and cables. What is next?


Hi,,check your float level,,as you have changed the floats the level will need adjusting,,

Aug 03, 2011 | 1993 Suzuki VS 800 Intruder

1 Answer

I have 1989 suzuki 250 quadrunner. why does it idle up and down when it just sits there? i've rebuilt the carb


1.Intake leak
2.Old fuel the 10% ethanol is not a good fuel it attracts water..
3.Idle slightly too high and spark advance keeps advancing and then retarding.
Try dropping the idle some. Warm it up to normal operating temp first.
4. Float is opening and closing seat changing the fuel level in the bowl
5. Spark plug is dirty.
6. Compression changing as it warms up

Good luck

Feb 07, 2011 | 2003 Suzuki RM 250

1 Answer

NEED TO KNOW FLOAT LEVEL HIGHT. REPLACED FLOAT AND NEEDS LEVEL ADJUSTED. FUEL OVER FLOWING WHEN BIKE RUNNING.


the common rule is to have it adjusted within 2mm of where the gasket meets the carb and bowl. get a clear hose about 6 in long and connect to where the fuel is flowing out of while bike is off. bend it to where the side of the hose runs up and down next to your carb. it will show where your level is. then keep adjusting till its around the gasket. also check to make sure the rubber valve isn't missing or damaged in your float.

Apr 03, 2010 | 2003 Suzuki RM 250

1 Answer

My burgman 250 is a pain to start when cold


service your carb and fit a new air filter.
You might have a blocked start jet for the starting and possibly float level issues etc.for your mpg.

Aug 02, 2009 | 2001 Suzuki Burgman 250

Not finding what you are looking for?
Motorcycles Logo

Related Topics:

22 people viewed this question

Ask a Question

Usually answered in minutes!

Top Motorcycles Experts

Arnie Burke
Arnie Burke

Level 3 Expert

4514 Answers

yadayada
yadayada

Level 3 Expert

75051 Answers

kakima

Level 3 Expert

102366 Answers

Are you a Motorcycle Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...