Question about 2000 Yamaha YZF-R1

1 Answer

2000 yamaha r1 cuts out sometimes at low rpms

Why would my bike be cutting out at low rpms sometimes other times it dont at all? It cleans up at the higher rpms. I have changed the main jets and plugs. It started to do it right at the beginning of winter so i put it up then i got it out the other day and it ran perfect for 4 days straight then it sat for 3 days in the rain now it is doing it again.

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 98 Answers

Check for a vacum leak by the fuel shut off valve.if the system leaks vacum.It can cause the symptoms you are stating

Posted on Mar 11, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Would a 2006 yamaha r1 fairing kit fit a 2001 yamaha r1 or even a later model then 2006?


Yes, but you may need to adapt the brackets or cut the fairing to fit in places. It is possible to fit just about any fairing to any bike- as long as you are prepared to adapt it.

Apr 08, 2013 | 2000 Yamaha YZF-R1

1 Answer

Chokes out at 8500 rpm


try running some SEAFOAM gas treatment through it. Might take a few tank but it should clean out the carbs

Oct 04, 2012 | 2003 Yamaha YZF-R6

1 Answer

How to adjust idle on 2000 yamaha r1? where is the screw?


Hi, Anonymous for this scenario you will need your service/owners manual if you can't find the first and best tool you ever bought for your Yamaha, despair not, for a mere $0 you can download another one. For more information about your issue and valuable "FREE" downloads that you will need please click on the links below. Good luck and have a nice day.
http://www.r1-forum.com/forums/4-mechanical-help/127945-idle-adjustment.html
yamaha r1 idle fixed
2000 2001 Yamaha YZF R1 Service Manual R1 Moto Data Project
OEM parts for Yamaha
http://mybikemanuals.com/yamaha/yamaha-yz-owners-manuals

Aug 01, 2012 | 2000 Yamaha YZF-R1

1 Answer

2001 R1 cuts our randomly while riding, no specific RPM gear or temp, engine just completely cuts out. gauges still working. Can start right back up while still riding, sometimes have to put the bike in...


Hi, Tom and the usual suspects are:
1. Severely discharged or a damaged battery, should have 12.5 volts or better and be able to pass a load test if necessary.
2. Failed alternator/generator and or voltage regulator.
3. Loose or corroded battery terminals and or cables especially the "NEGATIVE" cable, look for loose, corroded, or broken connectors inside the cable harness at "BOTH" ends.
4. Failed main circuit breaker or ignition switch, check for loose connections and continuity.
5. Failed system and or ignition relay, check for continuity.
6. Failed ignition coil, ignition/electronic module.
7. Failed CKP, CPS, CMP, MAP, TPS, or BAS sensor, corroded, loose or broken wire connector pins/sockets.
8. Throttle cables and or idle speed improperly adjusted hot idle speed should be 950 RPM to 1000 RPM.
9. Air/fuel mixture screw improperly adjusted.
10. Accelerator pump damaged or not working.
11. Water or dirt in the fuel system, carburetor or filter.
12. Restricted, blocked or kinked fuel line.
13. Fuel tank empty.
14. The gas cap is not venting properly or fuel tank venting system blocked.
15. A failed fuel pump, pressure regulator and or fuel injectors.
16. Vacuum line from intake manifold to petcock broken, cracked, or not attached, carburetor vent line plugged.
17. Needle and seat stuck closed in the float bowl.
For more information about your issue and valuable "FREE" downloads that you need please click on the links below. Good luck and have a nice day.
http://www.r1-forum.com/forums/102-00-01-r1-mechanical-help/253285-help-2001-r1-engine-cuts-out-randomly-when-riding.html
https://yamahaclub.com/forums/topic/21336-r1-cuts-out-or-only-runs-poor
2000 2001 Yamaha YZF R1 Service Manual R1 Moto Data Project
OEM parts for Yamaha
http://mybikemanuals.com/yamaha/yamaha-yz-owners-manuals

Sep 22, 2011 | 2003 Yamaha YZF-R1

1 Answer

Yamaha r1 2000 leaking fuel from breather pipes and is spitting at low revs, cutting out now.


Hi, Anonymous and the usual suspects are:
1. Damaged or restricted fuel tank venting system.
2. Loose float bowl screws.
3. Damaged float bowl o-ring.
4. improper fuel level in the float bowl.
5. Worn or dirty inlet valve or seat.
6. Damaged or leaking float assembly.
7. Particle contamination in inlet fitting cavity.
For more information about your issue and valuable "FREE" downloads that you will need please click on the links below. Good luck and have nice a day.
http://www.r1-forum.com/forums/101-98-99-r1-mechanical-help/197293-fuel-leak.html
http://www.r6messagenet.com/forums/r6-maintenance-technical/23989-fuel-constantly-leaking-out-overflow-tube.html
2000 2001 Yamaha YZF R1 Service Manual R1 Moto Data Project
OEM parts for Yamaha
http://mybikemanuals.com/yamaha/yamaha-yz-owners-manuals

Apr 22, 2011 | 2000 Yamaha YZF-R1

1 Answer

Cuts out sometimes at low rpms and doesnt doit other times


may have a little water in the ram air intake and the air filter may be wet, try removing it and blowing out relly good with a high pressure air hose.good luck.

Mar 11, 2009 | 2000 Yamaha YZF-R1

1 Answer

Cuts out sometimes at low rpms 2000 yamaha r1


Hvae you put on an aftermarket pipe? If so I owuld recomend rejetting the carbs. It probaly happens alot when the temp changes outside.

Mar 11, 2009 | 2000 Yamaha YZF-R1

Not finding what you are looking for?
2000 Yamaha YZF-R1 Logo

Related Topics:

267 people viewed this question

Ask a Question

Usually answered in minutes!

Top Yamaha Experts

Steve Sweetleaf
Steve Sweetleaf

Level 3 Expert

1128 Answers

D. E. Hev

Level 3 Expert

1059 Answers

mikeuk

Level 2 Expert

61 Answers

Are you a Yamaha Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...