Question about 2008 Suzuki GSX-R 600
KOMOTO GAS SCOOTER QH-25011-A
After the battery was recharged the miles display went to Kilometers instead of Miles. How do you change it back to miles? Two buttons on the display.
SOURCE: 150CC Roketa Scooter
Hi and welcome to FixYa,
On most versions of Roketa 150cc engines, the choke is automatic and electrically driven.. It is integrated with the carburetor.
Good luck and thank you for asking FixYa.
Posted on Jun 29, 2009
Posted on Aug 14, 2009
This is probably due to a faulty wiring, regulator/rectifier or, less likely faulty alternator
1st check the wiring & connections from the alternator to the reg/rect (3 yellows) then check wiring to the battery (thick red)
You should get 13.5 volts (with a fully charged battery) across the battery terminals rising with the engine revs to no more than 15.5 volts, if its over then the regulator is at fault
check the alternator for continuity between the 3 yellow wires (3 pairs) at the reg/rect plug after disconnecting it. the 3 pairs should have a similar reading & none should go to earth
To check the rectifier part you need a diode drop setting on your multimeter. there should be a reading 1 way only between the red & any yellow and between the black & any yellow if not it will need renewing
Hope this helps
Please mark as helpful if it has been
Posted on Oct 28, 2009
[*]Set your odometer to "Odometer" and not a trip meter.
[*]Press the "SEL" button for 2 seconds to switch between KMH and MPH
This only works on the US models.. UK too.. most Canadian models do not have this function.
Best of luck.
Posted on Mar 25, 2011
Tips for a great answer:
Nov 30, 2014 | Health & Beauty
Mar 11, 2014 | Tomtom Go 630 GPS Receiver
Sep 26, 2010 | Aermacchi Sprint 350 Motorcycles
May 05, 2010 | RTO Gas Motor Scooter
Feb 01, 2010 | RTO Gas Motor Scooter
Jan 18, 2010 | Pride New Mobility Legend 4 Wheel Scooter
Jul 01, 2009 | Sport & Outdoor - Others
Apr 20, 2009 | Transport Schwinn Rechargeable Portable ...
244 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: