Question about 2005 Yamaha Xv 250 Virago S

1 Answer

Idle adjustment 250cc Virago where is the idle adjustment?

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Expert
  • 69 Answers

Your idle adjustment should be some where on the side of your bike, its usually a black cable with a black dial on the end of ot and should be attached to a metal cable/rod and bolted to another part of the bike

Posted on Mar 10, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I can not get an even tickover


Hi, Anonymous and the usual suspects are:
1. Idle speed improperly adjusted.
2. Air fuel mixture screws not properly adjusted.
3. Inlet system air leak.
4. Leaking accelerator pump.
5. Loose low-speed jet.
6. Plugged low-speed jet.
7. Contaminated or plugged low-speed circuit.
8. Enrichner valve/choke not seated or leaking.
For more information about your issue and valuable "FREE" downloads that you will need please click on the links below. Good luck and have a nice day.
http://viragohelp.com/virago-hitachi-carburetors
http://viragohelp.com/virago-carburetor-cv
Yamaha XV 535 DX Virago Service Manual
OEM parts for Yamaha
http://www.starmotorcycles.com/assets/service/manuals/2000/LIT-11626-13-16_110.pdf

Jul 03, 2014 | 1998 Yamaha XV 535 Virago DX

1 Answer

My Yamaha 535 stays at high idle after the throttle is returned to idle position


Hi, Anonymous and the usual suspects are:
1. Throttle cables improperly adjusted or pinched.
2. Idle adjusting screw needs to be backed off.
4. Air fuel mixture adjusted too lean start with 2 full turns.
5. Intake system air leak.
6. Fast idle choke ramp is not releasing.
7. Broken throttle return spring.
8. Damaged diaphragm or slide.
9. Faulty MAP, TPS, ATS, O2, sensors or wiring/connector
For more information about your issue and valuable "FREE" downloads that you will need please click on the links below. Good luck and have a nice day.
http://viragotech.com/newtech/535%20runs%20for%20a%20while%20then%20dies%20(SOLVED).htm
Virago idle problem
Yamaha XV 535 DX Virago Service Manual
OEM parts for Yamaha
http://www.starmotorcycles.com/assets/service/manuals/2005/LIT-11626-18-21_1000.pdf

Mar 04, 2012 | Yamaha XV 535 Virago DX Motorcycles

1 Answer

My 1995 Yamaha XV535 will not idle properly. I've


Hi, Jerry and the usual suspects are:
1. Idle speed improperly adjusted.
2. Air fuel mixture screws not properly adjusted.
3. Inlet system air leak.
4. Leaking accelerator pump.
5. Loose low-speed jet.
6. Plugged low-speed jet.
7. Contaminated or plugged low-speed circuit.
8. Enrichner valve/choke not seated or leaking.
9. Multi carburetors out of sync and need to be balanced.
For more information about your issue and valuable "FREE" downloads that you will need please click on the links below. Good luck and have a nice day.
Virago XV250 Choke and Idle Problem Premium fuel
http://viragotech.com/newtech/Only%20starts%20idles%20on%20choke%20dies%20when%20you%20give%20it%20gas%20(SOLVED).htm
Yamaha XV 535 DX Virago Service Manual
OEM parts for Yamaha
http://www.starmotorcycles.com/assets/service/manuals/2005/LIT-11626-18-21_1000.pdf

May 25, 2011 | 1995 Yamaha XV 535 Virago DX

2 Answers

Hi I have an '81 yamaha virago 750,I don't know how to adjust the carbs,it getting too much gas and I was told I needed to close the gas off and open the air.....????


Below is a diagram. Turn the air screw inward until it lightly seats then open it up two turns. Set the idle speed with the throttle screw. The throttle screw pushes against a lever on the outside of the carb. From there, adjust the air screw for best idle speed. Do this for both carbs. Be sure the air cleaner is clean.
tombones49_110.gif

Apr 25, 2011 | Yamaha XV 535 Virago DX Motorcycles

1 Answer

Low idle - yamaha virago 535(1994)


Hi, Ramberry and the usual suspects are:
1. Idle speed improperly adjusted.
2. Air fuel mixture screws not properly adjusted.
3. Inlet system air leak.
4. Leaking accelerator pump.
5. Loose low-speed jet.
6. Plugged low-speed jet.
7. Contaminated or plugged low-speed circuit.
8. Enrichner valve/choke not seated or leaking.
9. Multi carburetors out of sync and need to be balanced.
For more information about your issue and valuable "FREE" downloads that you will need please click on the links below. Good luck and have a nice day.
http://viragotech.com/newtech/535%20runs%20for%20a%20while%20then%20dies%20(SOLVED).htm
Yamaha Virago 1100 Idle
Yamaha XV 535 DX Virago Service Manual
OEM parts for Yamaha
http://www.starmotorcycles.com/assets/service/manuals/2005/LIT-11626-18-21_1000.pdf

Jun 05, 2010 | 1994 Yamaha XV 535 Virago DX

1 Answer

2007 virago 250 idle fine w/choke idle fine no choke can very slowly raise rpm but while at stationary hi idle the rpm's flucuate from 300 rpm to 3000 rpm without touching gas when you give gas normal it...


Hi, Dma942 and the usual suspects are:
1. Extremely lean fuel mixture.
2. Dirt, rust, water, or ethanol sludge in the fuel system.
3. Sticky throttle cables.
4. Multiple carburetors not in synchronization.
5. TPS sensor out of adjustment or faulty.
6. Wrong spark plugs for the type of service.
7. Throttle bodies not in synchronization (FI)
8. Faulty O2 sensor.
9. Clogged, stuck, or faulty IAC valve.
10. Aftermarket components not compatible with ECM.
For more information about your issue and valuable "FREE" downloads that you will need please click on the websites below. Good luck and have a nice day.
Virago XV250 Choke and Idle Problem Premium fuel
Yamaha Virago 250 Idle Stall Issue
http://www.groussin.com/multi/XV250.pdf
OEM parts for Yamaha
http://www.starmotorcycles.com/assets/service/manuals/2005/LIT-11626-18-21_1000.pdf

May 23, 2010 | 2005 Yamaha Xv 250 Virago S

1 Answer

The engine on my 250 virago does not idle back


Hi, Atvnorton and the usual suspects are:
1. Throttle cables improperly adjusted or pinched.
2. Idle adjusting screw needs to be backed off.
4. Air fuel mixture adjusted too lean start with 2 full turns.
5. Intake system air leak.
6. Fast idle choke ramp is not releasing.
7. Broken throttle return spring.
8. Damaged diaphragm or slide.
9. Faulty MAP, TPS, ATS, O2, sensors or wiring/connector
For more information about your issue and valuable "FREE" downloads that you will need please click on the links below. Good luck and have a nice day.
http://www.xs11.com/forum/showthread.php?t=24258
http://www.thegsresources.com/_forum/showthread.php?224200-Answer-to-high-idle-when-warm-and-question-regarding-petcock
http://www.groussin.com/multi/XV250.pdf
OEM parts for Yamaha
http://www.starmotorcycles.com/assets/service/manuals/2005/LIT-11626-18-21_1000.pdf

May 09, 2010 | 2004 Yamaha Xv 250 Virago S

1 Answer

Have a 250cc yamaha virago its been standing for a while the problem is it starts ok but wont idle but runs well at high revs?


Hi and welcome to FixYa,

Almost always, your described problem indicates clogged idling jets. Stale fuel causes varnish like coating which must be removed. This then calls for a carb pulldown, disassembly and soaking non-rubber parts in carb cleaner. In the exploded carb diagram below, the idle (pilot) jet would be # 20.

467dae4.jpg

Good luck and thank you for asking FixYa.

Nov 17, 2009 | 1989 Yamaha Xv 250 Virago S

1 Answer

How do i adjust the idle on my 1995 yamaha virago 1100 cc motorcycle?


On most bikes and four wheelers, this is done by a throttle stop. the position of the stop is usually adjusted by a screw. Remove the tank. turn throttle and see what moves by the carb/ injectors. When you return throttle to idle, the moving piece will come to rest on the throttle stop. You can now adjust its position by turning that screw.

Sep 26, 2009 | 1995 Yamaha XV 535 Virago DX

Not finding what you are looking for?
2005 Yamaha Xv 250 Virago S Logo

Related Topics:

617 people viewed this question

Ask a Question

Usually answered in minutes!

Top Yamaha Experts

mikeuk

Level 2 Expert

61 Answers

Steve Sweetleaf
Steve Sweetleaf

Level 3 Expert

1128 Answers

D. E. Hev

Level 3 Expert

1132 Answers

Are you a Yamaha Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...