Question about 2000 Harley Davidson FLHR-FLHRI Road king

1 Answer

Indicator problem indicators work on right hand side when ignition is switched on , when switched to left then back to right will not work , all indicators flash when alarm is activated . have put on new earth wire for indicators , now it keeps blowing fuses . can't find flasher unit to test it . bike is road king

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.


    An expert who has written 50 answers of more than 400 characters.

  • Harley Davidson Expert
  • 291 Answers

The flasher unit is called the TSSM module. It is a combined flasher and alarm unit. A new one will require your alarm keyfobs to be matched to it. An expensive unit if faulty. If you replaced the earth wires and now its blowing fuses, then I would check your work. The fault has changed after you worked on the vehicle so logic dictates you have caused this. The black wire is usually the earth on these indicators but it is a possibility that these are routed through the TSSM module. You might have done damage if this is so.

Posted on Mar 12, 2009

1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Right signal lights flash but left one wont any sugestions

Well it won't be the relay if one side works .it's more than likely the switch that's either faulty or has a bad contact.swap the wires from the left indicators to the right to test the left indicators actually work.

Mar 08, 2015 | Motorcycles


Wiring Diagram Kawasaki GPZ 750

Kawasaki GPZ750 (ZX750) Turbo North American models.<br /><br /><img src="suzman_10.JPG" /><br /><br />1 - Right turn <br />2 - High beam<br />3 - Warning light<br />4 - Headlight fail<br />5 - Neutral<br />6 - Left turn<br />7 - Boost Guage <br />8 - Tach light<br />9 - Tach/volt switch<br />10 + 11 - Speedo lights<br />12 + 13 - Illum. lights<br />14 - Spare connectors<br />15 - LCD + warnig lights<br />15 + 16 - LCD illum<br />17 - RF indicator<br />18 - Horns<br />19 - Headlamp<br />21 - LF indicator<br />22 - Reserve lighting unit<br />23 - Hazard switch<br />24 - Indicator switch<br />25 - Horn switch<br />26 - Dimmer switch<br />27 - Starter lockout switch<br />28 - Neutral switch<br />29 - Side stand switch<br />31 - Oil pressure switch<br />32 - Alternator<br />33 - Regulator<br />34 - Solenoid<br />35 - Starter<br />36 - Battery<br />37 - Junction box<br />38 - LR Indicator<br />39 - Stop/tail lamps<br />40 - Stop/tail lamps<br />41 - RR Indicator<br />42 - Injectors<br />43 - Engine temp switch<br />44 - Boost sensor<br />45 - Fuel pump<br />46 - Air temp sensor<br />47 - Throttle sensor<br />48 - Main pump relay<br />49 - Fuel injection control unit<br />50 - Rear brake switch<br />51 - Pick-up coils<br />52 - Ignition control unit<br />53 - Coils<br />54 - Spark plugs<br />55 - Fuel level sensor<br />56 - Front brake switch<br />57 - Starter/engine stop<br />58 - Ignition<br />

on Nov 22, 2010 | Motorcycles

1 Answer

Left hand indicators not working aprilia rs 125 1996?

Hi, Anonymous I am sorry you can't find the first and best tool you ever bought for your Aprilia but despair not for a mere $10 you can download another one. For more information about your issue, please visit the websites below. Good luck and have a nice day.

Jan 02, 2014 | Aprilia Motorcycles

1 Answer

The left hand indicators on my triumph adventurer 900 have stopped working. The bulbs are ok and the relay ticks away and appears to work ok.

Have you tried swaping the indicator wires around plug the left into the right this will eliminate the indicators themselfs if the problem moves to the other side the relay would be at fault assuming you have checked the bullb wattage

Oct 04, 2011 | 1996 Triumph Adventurer

1 Answer

The neutral indicator light isnt working.

If you neutral indicator light is not working it could be three things. One, the bulb in the indicator is bad. Two, the wires have come off the neutral switch in the transmission. Or, Three, the neutral indicator switch on the transmission is bad. Look at the chrome cover on top of the transmission on the right hand side of the bike. There is a switch with two wires running to it. One wire is a ground and the other goes to the switch, Disconnect the one going to the switch. Turn the ignition switch on and touch the wire you disconnected to ground. The neutral light should come on. If it does, the switch is bad and needs to be replaced. If it doesn't the bulb in the indicator is bad or there is a problem in the wiring.

Good Luck

Apr 10, 2011 | 2002 Harley Davidson FLHRCI Road King...

1 Answer

(L) hand indicators not working. fuses,bulbs ok. would there be a issue with the hand peice or is there a rely switch for the indicators,(R) is working fine.

could be the switch,but check the connectors first, a small test light may help.
Any fuse switch or relay is usually for left and right, so your problem will be a wire , connector or the switch.

maybe some contact cleaner sprayed in the switch will help

Jun 19, 2010 | 1998 Ducati 900 SS

1 Answer

2001 aprilia rs125 indicators dont work on left

their sounds like their is a short in the switch or wire.

if i was testing it. id unplug the one side and test the other alone. then each wire individuality for current when i press switch to on position

shorts seem top be visible at times with visual inspection. so look before you touch. and checking the switch for resistance is a good idea also. but do not have the battery hooked up to test switch for resistance or no power to switch when testing.

Feb 18, 2010 | 2002 Aprilia RS 125

2 Answers

Hyosung GT250R indicator not working

It sounds like:
1) One of the wires that takes power to the right hand turn signals is shorted to the chassis.
2) One, or both, of the right hand turn signal bulbs is burnt out.
3) The turn signal switch has failed.

Nov 18, 2009 | 2005 Hyosung GT 250

Not finding what you are looking for?
2000 Harley Davidson FLHR-FLHRI Road king Logo

493 people viewed this question

Ask a Question

Usually answered in minutes!

Top Harley Davidson Experts

Arnie Burke
Arnie Burke

Level 3 Expert

4497 Answers

Gills Lango

Level 2 Expert

195 Answers


Level 3 Expert

4332 Answers

Are you a Harley Davidson Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides