Question about 1998 kawasaki ZX-9R Ninja

1 Answer

My 098 ninja won't click

Okay so i just bought a bike and when i test drive it worked fine so i wanted to do a turn up and i did. after turning it up i put the gas tank on and nothing happens in won't start or noting. i try jump starting it so far noting.
my bike won't click or noting.

Posted by on

  • joe May 11, 2010

    will dash lights come on or no lights at all? if no, is the battery reconnected?

    did you replace spark plugs as part of the tuneup? if so, are all of the plugwires properly seated onto the plugs?

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 3 Answers

Perhaps you damaged the starter button or pinched a wire somewhere? check all wiring and connections, switches, buttons. if your bike a fuse block, check all appropriate fuses. if all these things are working properly, break out a multi-meter and check for continuity thru all wires associated with the ignition, fuse block, battery, and if all else fails, check out the starter, it may have been damaged somehow(excessive heat, liquids such as oil water brake fluid, or possibly metal shavings?) i dunno. but before you try everything i mentioned, listen to what the man above my post (FTjoe) has said. hope you get it back on the road bud. ride safe!

Posted on Mar 18, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My 2012 ninja 650 wont let me turn key to on position


Hi, Milad for this situation I would call my local dealer or reputable shop's service/parts department and inquire about any possible quick fix, answers, or parts inquiry. For more information about your issue and valuable "FREE" downloads that you will need please click on the links below. Good luck and have a nice day.
Key won turn to the on position
Ignition switch won turn ITS STUCK
Ignition key won turn on 2004 Ninja 250R motorcycles
http://mototh.com/files/kawasaki/Ninja-650R/Kawasaki-Ninja-650R-Service-Manual-EN.pdf

Nov 04, 2016 | 2012 kawasaki Ninja 650

1 Answer

1999 zx7r no start


Hi, Anonymous nice novella and the usual suspects are:
1. Fuel tank empty.
2. The fuel tank has old dead gas.
3. Fuel tank bottom contaminated with ethanol sludge, dirt, water, rust, etc.
4. Fuel supply valve/petcock turned off.
5. Fouled spark plugs.
6. Engine flooded as a result of overuse of the enrichner.
7. Vacuum hose to the fuel supply valve/petcock disconnected, broken, cracked, or pinched.
8. Fuel valve/petcock or filter clogged.
9. Fuel line to carburetor or throttle body pinched, kinked or blocked.
10. Carburetor float stuck.
11. Fuel injectors clogged.
12. A severely discharged or damaged battery, you need 12.5 volts or better and be able to pass a load test if necessary.
13. Check battery terminals for damage or corrosion, check the battery cables at "BOTH" ends for loose, corroded, or broken connectors, "INSIDE" and outside the cable harness, perform connector wiggle test and check cables with an ohmmeter if necessary.
14. Loose or corroded wire connection at the coil or plug between ignition sensor and ECM module.
15. Spark plug cables in bad condition and shorting check for spark leakage in the dark, cable connections loose, or connected to the wrong cylinders.
16. Ignition timing incorrect due to a faulty ignition coil, ignition module or MAP, CMP, CKP, O2, TPS, ETP, IAC sensors.
17. Faulty neutral, clutch lever, or kickstand safety switch.
18. Faulty fuel pump or fuse or relay.
19. A stuck bent or burnt valve.
20. Tilt sensor needs a reset.
21. Security system not disarming alarm needs a reset.
22. Check for engine trouble codes.
For more information about your issue and valuable "FREE" downloads that you will need please click on the blue links below. Good luck and have a wonderful day.
http://www.zxforums.com/forums/zx-7r-forum/50874-zx7r-won-t-start.html
What to do When Your Motorcycle Won Start
KAWASAKI NINJA ZX 7R Service Manual
OEM Parts for Kawasaki
Kawasaki Ninja Owners Manuals

Mar 08, 2017 | 1999 kawasaki ZX-9R Ninja

1 Answer

At the same time I can push start the bike and everything works fine ,clutch clutch lever everything works fine when im riding , just when I stop the bike acts like its dead , at the same time when im...


Hi, Anthony nice novella and the usual suspects are:
1. Ignition Switch not in the "ON" position.
2. Engine Run Switch in the "OFF" position.
3. Discharged battery, needs to be 12.5 volts or better and be able to pass a "LOAD" test, your battery may show 12.5 volts but has little or zero amps and must be replaced.
4. Check the battery terminals for damage or corrosion check the battery cables at "BOTH" ends for loose, corroded, or broken connectors, "INSIDE" and outside the cable harness, perform connector wiggle test and check cables with an ohmmeter.
5. Bank angle sensor needs a reset or is faulty.
6. FOB battery low or dead.
7. Faulty ignition switch.
8. Faulty starter button.
9. Faulty kickstand or clutch pull in switch/sensor.
10. Security alarm needs a reset.
11. Starter relay, solenoid or starter circuit wiring faulty.
12. Starter armature or field coils have failed.
13. Main fuse or circuit breaker may be blown or faulty.
14. The electric starter is working but starter clutch has failed.
15. Check for engine trouble codes.
For more information about your issue and valuable "FREE" downloads that you will need please click on the blue links below. Good luck and have a wonderful day.
ZX6R J2 2001 won start
What to do When Your Motorcycle Won Start
Kawasaki 2000 Ninja ZX 6R Service Manual
OEM Parts for Kawasaki
Kawasaki Ninja ZX 6R Owner Manual

Mar 31, 2017 | 2001 kawasaki ZX-6R Ninja

1 Answer

'04 Kymco Venox won't start. Bought it a few months ago from someone w. about 20,000 miles on it. Always runs good/never had a problem w. it 'til yesterday. Ran outta gas on the road...put more...


Hi Mrcherry99, for this situation I would call my local dealer or reputable shop's service department and inquire about any possible quick fix. If necessary transport your vehicle to the dealer or shop and have a professional technician take it for a test drive, if possible, and give you a written estimate of repairs and answer any specific questions you may have about your issue. Good luck and have a nice day.

May 18, 2011 | 2005 Kymco Venox 250

1 Answer

Blowing ignitor [cdi]


Hi, Gemmaj_p123 what is your ignition fuse doing, if your blowing CDI's then I would look for a short coming from the CDI on it's way to the coils, cracked or worn or chafed wiring for this scenario you will need your service/owners manual if you can't find the first and best tool you ever bought for your Kawasaki, despair not, for a mere zero $0 you can download another one.
For more information about your issue and valuable "FREE" downloads that you will need please click on the blue links below. Good luck and have a wonderful day.
Help fuse blows bike dies bad CDI
ignition fuse keeps blowing
Kawasaki Ninja ZX 6R Service Manual
OEM Parts for Kawasaki
Kawasaki Ninja ZX 6R Owner Manual

Apr 11, 2017 | 1999 kawasaki ZX-6R Ninja

1 Answer

I want to adjust my vales on my motorcycle


Coming from a previous ninja owner/rider. I know adjusting the valves is a project to get the mixture just right. If you say it is running fine, I would leave it alone. It you are really looking for more power, get a jet kit which comes specific for your bike and includes a bunch of different sized jets. But my honest opinion even after reaching 20,000 miles on this bike, if it isn't broken don't change it. The best way to learn is to meet a bike mechanic and become friends with him to learn more. There are usually 3 valves that control different RPM mixtures, a low mixture knob controls RPMs from idle-6k- mid knob from 6-9 and high knob that controls the fuel-to-air mixture at high RPMs from 9-12k+ rpm's. This is just one example and they are all different. Basically you test your RPM range, adjust the knob, and repeat until you find the right feel. Too much or too little gas it will get boggy in that RPM region. Oh and don't turn the high mixture valve thinking it's the low, get a repair manual online to locate the proper knobs and you could do it yourself.

Jul 25, 2009 | 2000 kawasaki ZX-9 R Ninja

1 Answer

2008 ninja 250 engine oil looks green color


Just replace the oil, its cheap enough to do and costs less than rebuilding the engine.
the white foam on the oil cap is normal its just fine water particals built up, change the oil and take the bike on a run.
so does the bike run fine with the jet kit and exhaust change ? you dont explain your self well.

Jun 21, 2009 | 2008 kawasaki Ninja 250R

Not finding what you are looking for?
1998 kawasaki ZX-9R Ninja Logo

142 people viewed this question

Ask a Question

Usually answered in minutes!

Top kawasaki Experts

Arnie Burke
Arnie Burke

Level 3 Expert

4514 Answers

yadayada
yadayada

Level 3 Expert

71162 Answers

chris

Level 2 Expert

232 Answers

Are you a kawasaki Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...