Question about 2004 Yamaha FJR 1300

1 Answer

Fjr 1300a 2004 ABS light stays on any advice on checking the possible cause Thanks

Posted by on

  • 1 more comment 
  • twf766 Mar 17, 2009

    ABS light stays on my 05 FJR now.....same advice to me please???

  • Anonymous Mar 15, 2014

    Fjr 1300a year 2003

  • Anonymous Mar 15, 2014

    Fjr1300 a year 2003


1 Answer

  • Level 1:

    An expert who has achieved level 1.


    An expert who has answered 20 questions.


    An expert that hasĀ over 10 points.


    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 26 Answers

You may want to see if there is any brake dust or dirt getting in the way of the sensor first. I would take a water hose and spray water where the front and rear sensors are just to see if they are dirty and not getting a good clean signal (just the sensor and brake area, not the whole bike). You may also want to be sure the connectors are plugged in properly and the contacts in the connectors are alright and not corroded. But first I'd make sure the brake calipers and sensors are cleaned. Then the connectors if they are located where water or dirt can easily get inside them. It's the easy stuff I'd check first.

Posted on Apr 16, 2010

1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer


Hi, Barbra for this situation I would call my local dealer or reputable shop's service/parts department and inquire about any possible quick fix or parts inquiry. If necessary transport your vehicle to the dealer or shop and have a professional technician take it for a test drive, if it is in running condition, and give you a written estimate of repairs and answer any specific questions you may have about your issue. For more information about your issue please visit the website below. Good luck and have a nice day.

Sep 01, 2015 | 2004 Yamaha FJR 1300

1 Answer

2008 Yamaha FJR1300 has a fuel meter with a self diagnosis system. When this system indicates a problem and the bike will not start - what is the next steps to remedy the problem?

You need to check the fuel pump, fuel pressure ( PSI ) and the fuel injector.
Also you might need to take the bike computer for a diagnostic test.

May 25, 2014 | 2012 Yamaha FJR 1300A

1 Answer

Bleeding brakes with dual discs

There has to be a bleed nipple on both calipers - its impossible to bleed a two calipers on separate sides of the bike with two brake lines with one bleed nipple - go back and have another better look.

May 15, 2014 | 2012 Yamaha FJR 1300A

1 Answer

I have a 2005 Yamaha FJR1300a....recently the abs light started flashing...what does that mean?

ABS flashing means not working - The Back-up will trigger the ABS every time it blinks - Remove back-up and test.

Jun 29, 2011 | 2005 Yamaha FJR 1300

1 Answer

Rear brake light stay on all the time on fjr 1300 2005

Probably the brake light switch in the handlebar or the hydraulic in-line brake switch.

May 02, 2010 | 2004 Yamaha FJR 1300

2 Answers

Flashing ABS light

i have a 58 plate fjr 1300
just put new tyre on rear.......NOW my ABS warning light is flashing.
can anyone help please
regards muttley

Oct 08, 2009 | 2005 Yamaha FJR 1300

1 Answer

My brake light stays on all of the time when the ignitino is on? 2004 Yamaha FJR

one of your brake lamp switches is struck on put your ear to the two switches, as you activate the brake you should be able to hear a "click"as the switch activates. if one doesn't disconnect that switch, and see if the lamp goes out.

hope this helps.

May 06, 2009 | 2004 Yamaha FJR 1300

1 Answer

Sound like "gırgırgır"

Your cam chain tensioner needs to be replaced mine has been done twice.

Feb 18, 2009 | 2005 Yamaha FJR 1300

1 Answer

On slow corners seems to want to over steer

Hi ..... Have you check te tyre pressures, matching tyres (profile and radial/crossply) and/or headstock bearings worn or incorrectly tensioned ?

Dec 27, 2008 | 2004 Yamaha FJR 1300

Not finding what you are looking for?
2004 Yamaha FJR 1300 Logo

Related Topics:

483 people viewed this question

Ask a Question

Usually answered in minutes!

Top Yamaha Experts


Level 2 Expert

61 Answers

Steve Sweetleaf
Steve Sweetleaf

Level 3 Expert

1128 Answers

D. E. Hev

Level 3 Expert

1132 Answers

Are you a Yamaha Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides