Question about 2005 Factory bike Chrono SM 250

1 Answer

Py 90 whats the timing on a py 90

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 3 Answers

When i put my PY90 into gear it goes straight off can you adjust the clutch?

Posted on Dec 24, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Machine smoke


Your bike is giving symptoms of engine block and piston issues if it is emitting white smoke from your silencer. Please get your bike checked with your mechanic.

Oct 08, 2013 | Bajaj Motorcycles

1 Answer

I have a 2007 sporty custom. I need new tires. 21" front and 16" rear. I think I will go with Metzeler me 880. I see on bikebandit they have a 90/90-21 radial . Stock size is mh90-21. Would...


I have Metzeler ME 880's on my 94 FXDWG and they have their good points and their bad points. They seem to handle well but they don't break very well. Several times, I've locked up the back wheel with the brake and I didn't even know it until the rear end started to come around on me. They make no noise or anything, The rear wheel just locks up and slides. I will not buy another set. This is my opinion of them.

Steve

Feb 21, 2011 | Harley Davidson XL 1200 C Sportster Custom...

1 Answer

Kids chituma py 90 when it does start as soon as you put in gear it stalls ive changed the spark plug and its got compression ??????


TAKE AIR FILTER & AND TRY STARTING IT . IF IT RUNS WE NEED TO CLEAN OR REPLACE
AIR FILTER , THEN BEFORE PUTTING IT BACK TOGETHER YOU NEED TO LOOK AT ALL OF
YOUR VACUM LINES GOING TO AND FROM, CHECK FOR CRACKS AND END SPLITS . I WOULD SUGGEST CHANGING YOUR FUEL FILTER AS WELL . SPARK IS NOT A PROBLEM
AND THE AIR MIX IS . YOU CAN PULL YOUR CHOKE ABOUT 1/4 THE WAY AND SEE IF IT
RUNS IN GEAR . IF NO ONE HAS MESSED WITH THE JETS ON YOUR CARB , YOU SHOULD
BE GOOD TO GO . TIP; GAS THATS SITS COLLECTS WATER FROM THE 10% ETHL SO
CHANGE IT .

Nov 16, 2010 | 2005 Factory bike Chrono SM 250

1 Answer

My py 90 wont start,


the same problem happened my py90 try taking out the sparkplug blowing in the hole to clean it out and if that doesnt work blow into the petrol cap really fast wen ur finished blowing put ur finger over the cap dont let any air out then kick start it about 6 times it should work on 2 kick starts but keep ur finger over the petrol cap

Feb 13, 2010 | 2005 Factory bike Chrono SM 250

1 Answer

Whats the write oil to put in a py 90,thanks stephen


RING 01244 377555 CHARLIE WILLIAMS (EVERYTHING BUT BIKES) WILL TELL YOU THEY ARE OPEN AT 10AM

Dec 02, 2009 | 2005 Factory bike Chrono SM 250

1 Answer

How do u put the timeing write on a py 90 ?


tdc the piston and on the cam sproket thers a 0 on it aline this with the notch on the head that faces forward place the sproket with the 0 facking this mark then bolt up then replace the cam tensioner

Jun 14, 2009 | 2005 Factory bike Chrono SM 250

1 Answer

What is the torque settings for a head on a bmw 318is e36


BMW cylinder torque setting all models According to my service manual as follows. Cyl head to engine block (torx e12 M10 bolts) Stage 1 30nm (22 ft ? lb) Stage 2 + 90 degrees Stage 3 + 90 degrees Cyl head to lower timing chain cover 10nm (89in ? lb) The tightening sequence is from inside to outside crossover as normal. Loosening sequence is from outside to inside crossover. Remember to set torque wrench at low setting and work gradually up through the whole sequence until you get the desired torque.

Apr 23, 2009 | 2003 Harley Davidson FLSTC Heritage...

Not finding what you are looking for?
2005 Factory bike Chrono SM 250 Logo

Related Topics:

603 people viewed this question

Ask a Question

Usually answered in minutes!

Top Factory bike Experts

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

john h

Level 3 Expert

7187 Answers

Angelo Stewart
Angelo Stewart

Level 2 Expert

224 Answers

Are you a Factory bike Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...