Question about 2002 BMW R 1150 RT (ABS)

1 Answer

Intermittent Throttle response.

I live in Wales in the UK and own a 2005 R1150rt. The bike has started to occasionally die on pulling away from a stop. **** violently on initial acceleration (usually just one hard ****) and then have like a stuttering effect on the throttle at constant revs around the 4.5 mark..
Anybody experienced this and solved the problem?

Thanks for taking the question..
Ysbytymike 

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Contributor
  • 21 Answers

I had this problem and it was the Hall effect sensors my bike would just cut out and a very slight misfire, change the coils, leads and plugs then I found it was the sensors I know a place that is cheap if you need them because from BMW £280 for the boash replacements

Posted on Jul 10, 2009

  • Paul Rogers
    Paul Rogers Aug 05, 2009

    tamboki4sensors.eu sell them for £60 very cheap

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

R1150rt. after a fuel stop it died on the road, changed the fuel


Carburator clean up could help solve the problem, it seems some dirt may have entered the float chamber!
Blow the jets with compressed air.
Hope this helps!

Nov 04, 2009 | 2002 BMW R 1150 RT (ABS)

1 Answer

Cylinders possibly cutting out, loss of power when accelerating


fuel problem the flots are a bit sticky and the bike is flooding under power this is a common problem

hope this helps

Jun 12, 2009 | 2001 Suzuki GSF 600 N Bandit

1 Answer

Starting problem


it could be your mass airflow sensor could be dirty. clean this and your throttle body out with carb cleaner and see if that works. Other sensors that might cause this problem include the O2 sensors, or the idle control motor. If this does not fix it then the alternative would be to replace the throttle body unit.

Jun 10, 2009 | 2005 GMC Savana

3 Answers

Daytona 650 Dies At Idle


First thing that came to my mind is the AIC Valve, If it's not that, you may want to check out the idle control system (I forget what it's called.... I can check if you want.) It's attached to the throttle bodies on the right hand side and it's basically a set of motors (maybe part of the choke system) My bike is throwing a code for it, and it will die every once in a while (still can't ride it, but at idle) And if I hold the throttle open at all, it'll be fine

Nov 10, 2008 | 2005 Triumph Daytona 650

1 Answer

Throttle


and had the bike souped for it. Anyway the throttle is SUPER touchy.. You breath on it and it takes off.. Because of this I ended up dumpin it 30 min after I got on..haha... My question is is there a way to stiffen up the throttle so that i have to crank the grip harder to give it gas? I am very inexperienced, and when it took off, i tensed up, hittin the throttle even harder. I know i will appreciate the the responsiveness when I get more experience, but i dont want to die in the process..lol.. thanks for you help! ,UYou need to learn to hold on to the bike with your legs, so you aren't pulling on the bars during acceleraion. The throttles are supposed to be easy to turn, so that it will snap completely closed when you let off. You can replace the throttle cam (the part that the cable attaches to) with a slower-opening unit that will give you more control. The amount you have to turn the throttle from closed to full-open will stay thesame, but it will open slower in the first half of the throttle pull, keeping you from getting such an abrupt surge of power. Once you get a little more time on the bike, you won't have this issue any longer. You will learn proper throttle control, and your wrist will get used to the throttle pull. ,,,

Nov 10, 2008 | 2005 Husaberg FS 450 c

Not finding what you are looking for?
2002 BMW R 1150 RT (ABS) Logo

451 people viewed this question

Ask a Question

Usually answered in minutes!

Top BMW Experts

Arnie Burke
Arnie Burke

Level 3 Expert

4514 Answers

yadayada
yadayada

Level 3 Expert

68970 Answers

phil cuzins
phil cuzins

Level 2 Expert

79 Answers

Are you a BMW Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...