Question about 1997 kawasaki VN 750 Vulcan

1 Answer

Removal of CA emission system on 97 vulcan

I am looking to remove the CA emission system on my 97 vulcan 750 motorcycle. I need to know what has to be removed & plugged off so the bike runs good.

Posted by on

  • 3 more comments 
  • John Tucker Feb 27, 2009

    I've got the manual, but tere is not a diagram ofr the emission system.

  • Anonymous Feb 28, 2009

    Yes I would like to see your version.

  • John Tucker Feb 28, 2009

    The manual tells you how to service the system, I want to take it off.

  • Mr. D Feb 17, 2012

    John Tucker I have a1997 Vulcan 800 and pulled the emissions system off because I installed an aftermarket air cleaner, the problem is the carb., fuel tank for the most part run on vacuum and when I pulled off the system I lost the vacuum. The bike ran great but I lost a lot of gas mileage at best only getting 34 miles to the Gallon when I should be getting around 45 to 50 to the gallon so I reinstalled the system except for the charcoal canister day lighted the carb vent line, vacuum switch hose at the very bottom nipple, ran the crank case vent line over to the chain, hose from the bottom of the pump out the bottom of the bike since these lines were day lighted (open to air) to the back plate of the original air cleaner. The after market air cleaners do not have the nipples for the connection of hoses like the original air cleaner.

  • Anonymous Mar 12, 2014

    its a 1999 vulcan 750

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 2,653 Answers

I've got the service manual. Do you need it?

Posted on Feb 27, 2009

  • RescueTechLA
    RescueTechLA Feb 27, 2009

    It mentions it specifically in my manual. Wanna take a look at my version?

    It's about 83mb.


×

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Where is the fuse box for the lights on a 97 750 kawasaki vulcan


Joseph, Fuse box is under side trim cover.You may have to remove the seat and the side cover to access fuse box. Check the attached links,instruction and guides, Good luck
"I hope this helped you out, if so let me know by pressing the helpful button. Check out some of my other posts if you need more tips and info."
MY 1999 KAWASAKI VULCAN TROUBLES
97 750 kawasaki vulcan fuse box location Google Search

May 04, 2016 | kawasaki Motorcycles

1 Answer

How to remove the seat on a Kawasaki 750 Vulcan ?


I believe there are a couple of bolts inside the "toolbox" in the backrest that need to be removed before the seat will come off.

Apr 09, 2014 | 2004 kawasaki VN 750 Vulcan

1 Answer

Where is drain plug for 93 vulcan 750


the oil drain plug is in a recessed pocket at the bottom of the oil pan you need a 17mm socket to remove it

Apr 08, 2012 | 1993 kawasaki VN 750 Vulcan

1 Answer

I have a Kaw vulcan 750. I removed all the CA emissions and air box and installed new jets. I have adjusted every thing from the mains to the needles. I chokes out at low to med speed. What am I doing...


You removed all the CA emissions and air box? If it is legal in your home state then it would be fine otherwise you are not going to be happy if the Government found out your illegal modifictions unless it is for off-road purposes.
Did you reinstall the air box again and use an air filter?
If you didnot then install it back and see a difference.
If this advise is good the rate this for the free community support. Thanks

Jul 31, 2010 | 1997 kawasaki VN 750 Vulcan

2 Answers

What's involved in replacing the stator on a 93 Vulcan 750?


Not a big deal. Just remove the left engine cover and you will find the stator bolted to it. Remove the three bolts holding the stator and the stator will then be free to come apart from the cover.

Nov 01, 2009 | 1993 kawasaki VN 750 Vulcan

2 Answers

What do i need to remove,and how to replace a stator on a 1996 v7


The stator comes off with the right front side cover If I recall correctly. All you need is a set of metric wrenches.

Can I get a “very helpful” rating on this answer?
358db0c.gif

Aug 28, 2009 | 1996 kawasaki VN 750 Vulcan

1 Answer

2004 kawaski 750 vulcan motorcycle


if you plan to modify your exhaust system you will have to rejet your carbs to compansate. kits are availableat most aftermarket shops.

Mar 04, 2009 | 2004 kawasaki VN 750 Vulcan

1 Answer

Looking for information on removing the california emission system on a 97 vulcan 750 motorcycle


The best advice I can give you is DON'T DO IT. Alteration of original equipment emission control devices is prohibited under Federal law Title II, 40CFR, better know as the Clean Air Act. Since the engine was designed with the emission controls as an integral part of the engine, instead of the power and performance robbing junk slapped on to vehicles in the late 70's and the early 80's, alteration will not give you any significant performance improvements.

Feb 27, 2009 | 1997 kawasaki VN 750 Vulcan

Not finding what you are looking for?
1997 kawasaki VN 750 Vulcan Logo

Related Topics:

392 people viewed this question

Ask a Question

Usually answered in minutes!

Top kawasaki Experts

Arnie Burke
Arnie Burke

Level 3 Expert

4471 Answers

Angelo Stewart
Angelo Stewart

Level 2 Expert

224 Answers

yadayada
yadayada

Level 3 Expert

60541 Answers

Are you a kawasaki Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...