Question about 1990 Honda CBR 1000 F

1 Answer

NEED TO FIND WHERE ALL VACUM LINES HOOK UP - 1990 Honda CBR 1000 F

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Novelist:

    An expert who has written 50 answers of more than 400 characters.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

  • Expert
  • 137 Answers

Hey m8,, vacume lines will have little rubber caps on them ,u will find them between the carbs and cylinder head,, on the in let rubbers,,,one vacume per cylinder, one cap on each inlet rubber, ,,cheers m8,

Posted on Feb 27, 2009

  • anne Aug 04, 2013

    Terry, I live in the U.S. (California). You are very cute. Thanks for the bike info

  • terry weightman
    terry weightman Aug 09, 2013

    hi anne..aww bless u for the message.can u feel the heat from my red blushing cheeks from there..(deeptattoo@hotmail.co.uk

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Timing marks diagram


I NEED TO NO WHERE ALL THE VACUM LINES HOOK UP TO ON A 1989 NISSAN Z24 ENG

Sep 07, 2013 | 1993 Nissan Pickup

1 Answer

I need the guide to reconnect the lines after changing the in take manifold gasket


Theres really no guide to tell you how to hook up each water, fuel, and vaccum line. The best way to avoid this is to mark your lines before they are removed. The only way I can think to help you is to send you to your local salvage yard and find your car with the same engine. Take a camera and take several snapshots of the lines that you need to replace. The only problem with this is that most cars will have several parts removed, making it more difficult to try to find your way back

Aug 16, 2012 | 1993 Buick Roadmaster

1 Answer

The transmission won't shift out of 3rd and will only go up to 50 mph at around 3500 rpm.


check for a bad vacum to the modulator valve on your transmission,or a bad vacum to the modulator valve on the transmission. the modulator valve to the trans. works off of vacum from the engine,look for loose or disconnected vacum lines around the carb. or the air induction system. look for cracked vacum lines that seem to be sucking air when engine running at idle speed. in park. the modulator valve [usually] located on the drivers side,of the transmission,is the main cause of shifting failure. if the valve itself is bad, it will need replacement. thank you for choosing fixya.com!

Mar 08, 2011 | 1996 Chevrolet Blazer

1 Answer

1989 corvette headlights intermittently open


check vacum lines for leaks in the headlight assembly,sometimes they dry rot,the vacum lines] it has to a vacum issue. you may need to replace the vacum lines with new vacum hose. you can but it by the foot at any parts store, but you'll need to carry a peice of old one to get exact size.trace the vacum lines from headlights to the source of vacum canister,just to be sure that the canister itself isn't leaking. look for cracks in the vacum lines along the way.if you find that the canister is cracked,it can be repaired by jb weld and repainted,just to keep it original.thank you for choosing fixya.com

Dec 31, 2010 | 1989 Chevrolet Corvette

1 Answer

How do i hook up vacum line


Vacuum lines either plastic or rubber usually go on a fitting by just pushing it in or on until it is completely to end of the stop. some are held on by a hose clamp.

May 27, 2010 | 1996 Ford Windstar

1 Answer

Looking for a diagram of how all vacum lines hook


See if this is what you are looking for. I hope that this helped and best wishes.


11d6b16.jpg

Jul 30, 2009 | 1995 GMC Safari

1 Answer

Timing


do you have the spark plug wires on the correct plugs that will throw your timming way off... and did you just change the timming belt?

Jul 27, 2009 | 1986 Honda Accord

1 Answer

Transit 07engine racing up@down


sounds like you have a vacum leak in one of the vacum lines or you need to change the idle air control valve. start the engine and raise the hood and lisen for a vacum leak and check all vacum lines for dryrot. if no vacum leak can be found then replace the idle air control valve, this controls your idling

May 06, 2009 | 2007 Ford Focus (3 Door) Hatchback

1 Answer

I need to know where the different vacum lines connect


your on the wrong site ,this is for vacuum cleaners and i don't think ford makes one

May 04, 2009 | Vacuums

Not finding what you are looking for?
1990 Honda CBR 1000 F Logo

Related Topics:

142 people viewed this question

Ask a Question

Usually answered in minutes!

Top Honda Experts

Arnie Burke
Arnie Burke

Level 3 Expert

4514 Answers

yadayada
yadayada

Level 3 Expert

71288 Answers

Gino Cussen
Gino Cussen

Level 2 Expert

216 Answers

Are you a Honda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...