Question about 2003 Suzuki RM 125

1 Answer

1987 RM125 leaking all of the oil out through an over flow hose coming from the top right corner of the magneto cover

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Novelist:

    An expert who has written 50 answers of more than 400 characters.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

  • Expert
  • 137 Answers

Hey m8,, sounds like behind the magneto theres a seal, u can only see it wen u take mag off, thas gone m8 and needs replacing,, there about 12 quid,,tops,, easy to fit cuz u can hack the old one out, u wont need it, but gently does it tappin the new one in,, wen u order the seal ,,write down the engine and frame number ,,itl be easier 4 the mechanic to get the right part,, cheers,

Posted on Feb 27, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Where is the oil level bolt located on a 1992 Suzuki rm125 dirtbike


Hi, Pete for this scenario you will need your service/owners manual if you can't find the first and best tool you ever bought for your Suzuki, despair not, for a mere $0 you can download another one. For more information about your issue and valuable "FREE" downloads that you will need please click on the links below. Good luck and have a nice day.
how to change oil on RM250 Suzuki RM125 Owner Service Manual
OEM parts for Suzuki
http://www.autoevolution.com/moto/suzuki-rm125-1987.html#aeng_suzuki-rm125-1987-124

Jun 23, 2016 | Suzuki Motorcycles

1 Answer

Will a 1999 Suzuki RM 125 power valve assembly work on a 2000 Suzuki RM 125


Hi, Anonymous after careful deliberation 4 out 5 Suzuki Gods give this one a thumbs up, but just to be on the safe side you should give your local dealer's parts/service department a call to confirm. For more information about your question and valuable "FREE" downloads that you will need please visit the websites below. Good luck and have a nice day.
http://www.crservice.dk/Suzuki%20cross/RM125/RM125K7_01A.pd OEM parts for Suzuki
Suzuki RM 125 2002
http://www.autoevolution.com/moto/suzuki-rm125-1987.html#aeng_suzuki-rm125-1987-124

Mar 14, 2016 | Suzuki Motorcycles

1 Answer

Yamaha yz450f


over flow? bike running to lean? whats the hose for is there oil supposed to be in it?

Oct 13, 2013 | Motorcycles

1 Answer

How do you change the oil on a 1985honda aspencade goldwing?


Center stand the motorcycle.First place your pan under the oil filter cover under the front right corner of the machine. Using a six point socket loosen the filter cover bolt and remove the cover. Dump out the oil in the cover being careful to save the spring and the washer that is stuck to the filter.Many Goldwings have lost there washer in a previous oil change , if lost replace the washer. If you desire change the o-ring on the bolt and the o-ring on the cover. Put the bolt back into the cover and place the spring first over the bolt, then the washer, then the filter , so the spring is pushing the filter against the engine. Put the new filter onto the motorcycle and snug up the cover bolt just enough so the oil wont leak out. Do Not Over Tighten The Cover Bolt. Now place the pan under the right rear corner of the motor. You will find a horizontal bolt near the bottom right rear corner of the main block of the motor. It will have an aluminum or copper sealing washer. Take off the bolt and let the oil drain out. When the oil is finished draining , put the bolt back in with a new sealing washer , if needed , and snug up the bolt just enough so that it does not leak or come out. Again do not over tighten the bolt. Now pour in the new oil through the dipstick hole. Be sure you use JASO MA certified motorcycle oil. You will need 4 quarts but you may have a partial quart left over. The quantity is something between 3.4 and 4 quarts. Run the bike and double check the oil level with your dipstick so you do not over fill.

Sep 12, 2010 | 1985 Honda GL 1200 Aspencade Gold Wing

1 Answer

I have a 1987 rm 125 h need help on the wiring out of the magneto to the cdi box i dont have a plug on the mags wires the colors are black with a red stripe, green ,red , and re with white stripe the cdi...


Hmm, something has been changed at some stage.
All wires should be of same colour combo's.

Best guess is three wires from cdi go directly to magneto, whilst the fourth is for the coil. However your configuration suggest a different cdi unit is being used, the site below has a diagram of your bikes standard electrics, unfortunately not color coded.

Normally, it cannot be wired incorrectly as male/female and color wires determine correct connections. Find out the origins of the parts and seek the application for the color of each wire, ie: color wire for primary source, pulse coil, earth, etc. Transfer this info to the colors from your magneto, Goodluck and cheers.

http://www.cmsnl.com/suzuki-rm125-1987-h_model14053/partslist/FIG-22.html

Jul 30, 2010 | 2003 Suzuki RM 125

1 Answer

I just bought a 87 rm125 and the kid lost the cover over the sprocket and he said something about thats why it leaks oil something about its supposed to oil the chain how do i fix this


The sprocket cover backing plate covers over an oil gasket, and without this pressure, internal oil pressure will force oil out from here. Some models direct the sump breather hose over the drive sprocket so any drips may be of some use! Check the site below for an exploded view diagram, (entire bike is there) Cheers.

http://www.cmsnl.com/suzuki-rm125-1987-h_model14053/partslist/FIG-07.html

Jul 25, 2010 | Suzuki RM 125 Motorcycles

1 Answer

My rm125 spews oil out of the exhaust


could be one of 2 problems you are mixing the oil to ratio high or you have a internal sealing problem crankshaft seal or center case leaking.

May 11, 2010 | Motorcycles

1 Answer

Trans fulid coming out of over flow,never has done this before what could cause it the year is a 1996 Evo.5speed tranny


Sounds like it's been overfilled or the wrong fluid installed. Use 20-24 ounces of Harley transmission oil. If you use the wrong stuff, it may foam up causing the problem. You are talking about the rubber overflow hose that comes out of the chrome transmission top cover with the curve at the top? Right?

Sep 03, 2009 | 2000 Harley Davidson FXD Dyna Super Glide

Not finding what you are looking for?
2003 Suzuki RM 125 Logo

Related Topics:

268 people viewed this question

Ask a Question

Usually answered in minutes!

Top Suzuki Experts

yadayada
yadayada

Level 3 Expert

63990 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

4497 Answers

Ed Nelson
Ed Nelson

Level 2 Expert

149 Answers

Are you a Suzuki Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...