Question about 2003 Suzuki LS 650 Savage
Your gas most likely is gummy in your carb... take it apart .. clean it out and put it back on .. spray some starter fluid in the carb ... it should crank up
Posted on Mar 16, 2010
There are possibly three reasons for this one. firstly check for fuel in the piston by unscrewing the sparkplug and with ignition turned off kicking it over. if the hole smells of fuel then you knowe this is not the problem, then you should check for oil levels to see if the pistons have been fed by checking if the crank which you kick it over with moves freeish. if this is not the problem thne you shuld take sparkplug which is out and connect it to the lead from which iot came from and using a trusting friend and a pair of well insulated pliers touch botton hook of sparkplug onto the head(got to be good contact with metal of head or trusting friend getting nasty burns) if you can see a good spark from plug where hook is. if all of the above checks out then you mite have a bigger problem than you first thought. if all else fails i find pulling/pushing it down street in third/forth gear with the clutch out gets then started, unless as earlier stated it is a much bigger problem. also you wuold be well advised to check brakes after such a long time stood.
Posted on Feb 25, 2009
a 6ya Mechanic can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Tips for a great answer:
Apr 14, 2014 | 1987 Suzuki LS 650 Savage
Mar 14, 2014 | 1995 Suzuki LS 650 Savage
Nov 14, 2017 | 1996 Suzuki LS 650 Savage
Aug 22, 2011 | 1993 Suzuki LS 650 Savage
Jul 08, 2011 | 2002 Suzuki LS 650 Savage
Jan 24, 2010 | 1995 Suzuki LS 650 Savage
Mar 05, 2009 | 2003 Suzuki LS 650 Savage
Feb 26, 2009 | 2000 Suzuki LS 650 Savage
Feb 21, 2009 | 2003 Suzuki LS 650 Savage
482 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: