Question about 1998 Honda CBR 600 F(3)W

1 Answer

1998 Hond CBR 600 goes flat at 5800 rpm

It runs strong to 5800 rpm, then it goes flat and I really have to fight to get it above that rpm range. Above 7000 rpm it runs strong again. Bike has new stator, now plug caps and wires, new rectifier/regulator. ANY suggestions on what would cause this problem??

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I believe that you should give the carb jets a clean as this sounds like a fuel delivery issue. there is no electrical reason why there should be a break in performance like that.

Posted on Apr 09, 2009

1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Tacho goes erratic above 8000 rpm

when does it happen ? choke on or off / while riding or in neutral ? ... as a first guess i would say the throttle should be adjusted...

Jan 31, 2014 | 1998 Honda CBR 600 F(3)W

1 Answer

Motorcycle Trouble Shooting

possible plug cables arcking out.

Apr 07, 2013 | Motorcycles

1 Answer

My GSXR 750 J runs extreemly rough between 7000 and 9000 rpm. Its a mildly tuned engine with after market cams, a dynojet kit and I recently installed some inline fuel filters. The bike runs perfectly...

I would check and adjust the static ignition timing as if too far retarded it will tend to misfire at mid range revs. and suffer from lack of power at the top end.

Mar 01, 2011 | 1988 Suzuki GSX-R 750 J

1 Answer

I have 1998 passat when i do 100km the rpm goes above 3000 it feels like needs a gear pls let me know what might be the problem

I am assuming that this is an automatic transmission and it would indicate that that the transmission is not shifting into high gear. The normal rpm range at 100km should be 1800 -2200 rpm's. A visit to the transmission shop would be my recommendation.

Feb 19, 2011 | 1998 Volkswagen Passat

1 Answer

My Zeph an imported bike will not rev above 7000 rpm Would it be restricted?

If the bike came from the UK then most likely the power was limited, its usually just a throttle stop, look down where the cables hook up.

Apr 29, 2010 | 1991 kawasaki Zephyr 750

1 Answer

My K5 was running OK until today . It had been stood up over the winter and the battery had to be charged about a week ago as it had gone flat. But the bike was running OK after that. Today I took it out...

If the bike was stored the fuel could be stale, use some fuel stabilizer or drain and refill. Check the spark plugs to see if they have fueled up because of the stale fuel.

Mar 21, 2010 | 2005 Suzuki GSX-R 1000

Not finding what you are looking for?
1998 Honda CBR 600 F(3)W Logo

Related Topics:

285 people viewed this question

Ask a Question

Usually answered in minutes!

Top Honda Experts

Arnie Burke
Arnie Burke

Level 3 Expert

4514 Answers


Level 3 Expert

70387 Answers

Gino Cussen
Gino Cussen

Level 2 Expert

216 Answers

Are you a Honda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides