Question about 2004 Yamaha XT 660 R

2 Answers

Reverse override button doesn't seem to change anything

I have a 2004 Grizzly 660 ATV. When I push the reverse override button while in reverse, the engine still cuts out. I thought the reverse override button was supposed to prevent this.

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

The override button on your Yamaha isn't supposed to override reverse. It will only disengage the rev limiter while moving forward when you have the "Diff Lock" engaged. When this happens, you will see your speedometer change to zeros. If you want to override your reverse, you will need to rewire a few things. I found the info I needed at "grizzhopper.com" to rewire mine.

Posted on Feb 07, 2010

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 8 Answers

Check all the connection on the override circuit. If you ride in muddy and sandy and wet conditions connections can become loose and therefore cause the feature to lack, or not work at all.

Posted on Aug 16, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2008 Grizzly 450. Starts and idles fine but at about 10 mph why does it start to cut out like a rev limiter?


2011 grizzly 450 reverse rev limiter - Yamaha Grizzly ATV Forum

www.grizzlycentral.com > ... > Grizzly Engine & Transmission

Mar 11, 2012 - 9 posts
This is a discussion on 2011 grizzly 450 reverse rev limiter within the ... is for earlier model years like 2008. thanks for welcoming to the site :) rev limiter - Yamaha Grizzly ATV Forum
8 posts
May 23, 2009
Grizzly 700 Reverse rev-limiter Override Mod - Page 3 ...
15 posts
May 21, 2009
Hitting rev limited/ slow speed.... - Yamaha Grizzly ...
11 posts
May 20, 2009
reverse rev limiter - override witch bypass - Yamaha ...
6 posts
Oct 22, 2008
More results from www.grizzlycentral.com

Rev Limiter - GrizzlyOwners.Com Yamaha Grizzly Forums

www.grizzlyowners.com > Grizzly 660 > Modifications
Old 06-30-2008, 10:43 AM Thread Starter. modrak .... jasson450r is offline ... hey guys! how do you do this rev limiter mod on a 06 660 griz? i'm interested in ...

How to bypass reverse switch Grizzly 700(speed limiter ...

? 1:03
https://www.youtube.com/watch?v=l8nn5Z4cuN0

Dec 25, 2015 | Yamaha Motorcycles

1 Answer

2002 grizzly 660. Has no power wen starting out once moving its fine. cometostopitchattersrealbadfrom lowerend.?is what u guys thinkCrankbearinggonetight.Orsomethingintrans?Looking forsomewheretostart


Hi, Anonymous I just loaned my brand new pair of listening ears to your local dealers chief technician so he could take your bike for a test ride and give you his professional opinion and estimate about your noise and repair cost. For more information about your issue, please visit the websites below. Good luck and have nice a day.
http://www.yamaha-motor.com/assets/service/manuals/2008/lit-11626-21-03_griz660_all_1498.pdf
YAMAHA YFM 660 GRIZZLY 2002 2006 ATV SERVICE Repair Manual IMPROVED...

Dec 18, 2015 | Power Motorcycles

1 Answer

Grizzly


Make sure you are in neutral first. This is to stop people from selecting reverse when they aren't in control.

May 03, 2013 | Motorcycles

2 Answers

How do you disconnect the override button on a 2004 yamaha 660 grizzly


if your talking about the reverse override or the speed limiter,you will have to install an aftermarket high performance CDI unit

Apr 04, 2010 | 2004 Yamaha XT 660 R

1 Answer

I have a 2004 grizzly 660 and all the lighting went out except my brake light. what happened?


I would venture to say that if you have submerged the ATV recently that you have blown the fuse or Corrosion has set in on thebgrounding wire for tthe lighting system.

Nov 29, 2009 | 2004 Yamaha XT 660 R

1 Answer

2006 Yamaha Grizzly stuck in 4x4 switch will not work at all. Can push diff lock and the light will flash, but it will not lock, and light continues to flash.


Have you tried putting the ATV in reverse, drive 5 feet, then put in neutral and disengage the 4x4. I know that has worked with my 660. This has also worked with the diff lock.

Nov 15, 2009 | 2004 Yamaha XT 660 X

1 Answer

How to start a 660 grizzly quad


the atv must be in park or neutal, turn the key on and make sur the kill switch is in the run position turn the choke on located on the left handle bar under the head light switch, hit the start button and its should fire

Sep 11, 2009 | 1981 Yamaha XJ 650

1 Answer

I dont know were to put the water in the radaitor or how to get to it in a yamaha grizzly 660 atv


The filler is on top of the radiator on the left side of the bike, in front of the engine. Remove whatever fenders or cowlings are in the way to get access to the filler.
Can I get a “very helpful” rating on this answer?

461edcb.gif

Sep 02, 2009 | 2007 Yamaha XT 660 R

3 Answers

Hi I have problem with my raptor 660 2004.il runs well as I slowed my gas it my ***** and he has no power I change its spaplug did not change, is it that his can - etres the coil?


if it idles fine but when you give it gas you say you have no power? then you have a problem with your intake and exhaust valves.they need to be set.I have a 2003 660 raptor and it was doing the same thing and that fixed it.

Apr 23, 2009 | 2004 Yamaha XT 660 R

Not finding what you are looking for?
2004 Yamaha XT 660 R Logo

Related Topics:

633 people viewed this question

Ask a Question

Usually answered in minutes!

Top Yamaha Experts

Steve Sweetleaf
Steve Sweetleaf

Level 3 Expert

1128 Answers

D. E. Hev

Level 3 Expert

1059 Answers

mikeuk

Level 2 Expert

61 Answers

Are you a Yamaha Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...