Question about 2003 Yamaha YZ 250

2 Answers

1993 blaster wont stay running

Blaster will idle all day long soon as you hit the throtle it dies

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 16 Answers

Check the rev limiter it is on the top of your carb and also check the wires going to your thumb throtle they are also in conjunction with the rev limiter

Posted on Mar 04, 2009

  • Level 1:

    An expert who has achieved level 1.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 1 Answer

Try cleaning carb and see if the choke is hung up also make sure it has the right plug ngk b8es

Posted on Feb 22, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

1993 wide glide will not idle and dies when given accelarator


air leak intake mainfiold or tight valves ,check clearence &olso check carby not dirty or is full of water

Apr 18, 2014 | 2000 Harley Davidson FXDWG Dyna Wide Glide

2 Answers

I have a kawasaki lakota 300 (2001) It starts and runs with the choke on soon as i turn choke off it dies idle adjustment screww does nothing. I can here that it is working. Ive ran it up and down the...


You need to take off your carburetor , disassemble it, and clean the jets (specifically the slow jet) and the passageways in the carburetor body that feed the gas to the carburetor throat. Carefully set your air screw setting back to stock setting. and reassemble. Inspect the intake manifold and air box tubes for cracks and separations. That should get you idling again.

Oct 06, 2010 | kawasaki KLX 300 Motorcycles

1 Answer

Yamaha ttr125l will not stay running. will start


The idle circuit of the carburetor is likely clogged.

Jun 24, 2010 | 2004 Yamaha TT-R 125 L

1 Answer

1984 Yamaha XJ 650 wont stay running


hi,this might help,the carbs off the 550 will have smaller idle (pilot) jets,this will not allow enough fuel through at idle,the main jets sound like they are reasonably close,i would pull apart the ones off the 650 and check the jet sizes and then compare them with the ones off the 550,you will probably find that the ones out of the 550 are way to small,change the jets over(if they are compatible..should be)and your problem will most likely go away...hope this helps...cheers

Mar 31, 2010 | 1984 Yamaha XJ 650

1 Answer

SACHS XTC TWO STROKE DIES AS SOON AS THROTLE IS TOUCHED


A cold engine needs more fuel to run. The choke helps this by blocking the normal air flow.If you can get your hand over the carb intake try one finger at the time untill it will warm up. If it will just idle let it idle till it gets warm. The choke is so you can hope on and ride right away. 

Oct 16, 2009 | 2001 Sachs XTC-N

1 Answer

Wont idle properly.


vacuum leak.....get some carb cleaner an when you can get the bike to idle somewhat normal spray around hoses and intake manifolds...if idle increases that where the problem is.

Oct 08, 2009 | kawasaki GPX 250 R Motorcycles

2 Answers

Yamaha Vino 50cc


take it to the junkyard it's a piece of ****!!

May 18, 2009 | Yamaha XT 660 Z Tenere Motorcycles

Not finding what you are looking for?
2003 Yamaha YZ 250 Logo

389 people viewed this question

Ask a Question

Usually answered in minutes!

Top Yamaha Experts

Steve Sweetleaf
Steve Sweetleaf

Level 3 Expert

1128 Answers

D. E. Hev

Level 3 Expert

1059 Answers

mikeuk

Level 2 Expert

61 Answers

Are you a Yamaha Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...