Question about 2004 Honda CR 250 R

1 Answer

Water in exhaust - 2004 Honda CR 250 R

Posted by on

  • Jim London
    Jim London May 11, 2010

    Hi, How much water are we talking about? This engine does have twin radiators but these engines do have a lot of condensation in certain weather, up to a tablespoon full is not uncommon. Is there a glycol solution(antifreeze) in the bike? If there is, do you notice any in the water coming from the exhaust?

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 52 Answers

So you got water in your exhaust?

If so then just redo the engine Because it is going to rust then cease. or did it already cease? Because i race the world enduro series and its very common to see people water cease the bike instant ly i would need more info to provide a good answer.

Posted on Jun 01, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Amana furnace model amv9 has water dripping from the exhaust outlet. the exhaust doesnt seem to be clogged and the overflow for water to run into doesnt seem to be clogged. water is makign its way int


You did not say if you have a dehumidifier or air conditioner installed on this unit. If those are not installed on it then the only place moisture could be coming from is down the exhaust connection for the flue. If one or both of those items are installed then the issue is the drain trays might have debris built up that you cannot see.

Mar 23, 2014 | Heating & Cooling

1 Answer

Water is steaming from the exhaust while engine is running


Water coming from a exhaust is normal. The newer the car, the more emission control it has at protecting the environment and the more water you will see.

Remember that the combustion of hydrocarbon fuel produces both carbon dioxide AND water vapor as a normal part of the process. All gasoline engines produce water vapor and all water vapor condenses if the exhaust pipe is cool.

Apr 08, 2013 | 1999 GMC Yukon

1 Answer

Water dripping from exhaust


Most of the time water dripping is normal. The catalytic converter "converts" exhaust gases into water vapor.
The exhaust system also collects moisture when the engine is off.
It depends on how much water and when.
Are you adding coolant to the radiator ?

Jul 31, 2012 | 1996 Lexus ES 300

1 Answer

Water leaking at the exhaust paty


Water leaking from the exhaust when the car first starts. This is normal as the exhaust system is cold and the exhaust fumes contains a lot of water vapour (moisture). This is more noticable during very cold weather.
As your car warm up to normal operating temperature the water vapour is still present but because of the higher temperature you will not see this water vapour.

Jan 28, 2012 | Cars & Trucks

2 Answers

Water is getting out of the exhaust


Of course, I don't know the entire situation of your exhaust, but I doubt what you are seeing is water. The exhaust pipe carries out ignited gas fumes that your engine has ignited. Any unignited gas will escape through the exhaust pipe if it is not used properly. If large amount are coming out of you exhaust pipe, you are loosing a lot of money on gas. My best guess would be bad spark plugs not igniting the gas properly. I would try replacing those first. If you are not good with cars, I recommend taking the car to a certified professional mechanic. I hope this helps! Please feel free to ask any questions if needed.

Apr 25, 2011 | Mitsubishi Colt Cars & Trucks

1 Answer

Water is coming out from my tail exhaust pipe Ford Expedition 2003 4X4


When gasoline is burnt the products are carbon dioxide and water:- 2C8H18 (gasoline) + 25O2 (air) ----------> 18H2O (water) + 16CO2 (carbon dioxide) If you take short trips the water content will condense in the cold exhaust pipe and collect in the muffler boxes (silencers). At a certain point the water will fill the mufflers, overflow and begin to dribble out of the exhaust tail pipe. It is worthwhile to occasionally give your car a longer run to allow the exhaust to become sufficiently hot and to evaporate all the collected water. The water is acidic and hastens the corrosion of the exhaust pipes.

Dec 06, 2010 | Ford Expedition Cars & Trucks

2 Answers

Water coming out the exhaust


Water out of the exhaust is a natural by product of the catalytic process that occurs in your converter. A lot of water coming out the exhaust is NOT normal and indicates a possible head gasket problem.Watch you engine temperature gauge for overheating.The only way to know 100% is to have a mechanic pressure test your cooling system. Good Luck

Oct 22, 2010 | 1996 Buick Park Avenue

2 Answers

Need the step by step instructions and pictures on how to replace an water pump on an 2002 Oldsmobile Alero 2.4L


Removal & Installation

2.2L Engine
  1. Before servicing the vehicle, refer to the precautions section.
  2. Disconnect the negative battery cable.
  3. Drain the engine coolant.
  4. Remove or disconnect the following:
    Exhaust manifold, if equipped with n automatic transaxle Right front wheel Splash shield Water pump sprocket access plate from the timing cover

    fcd00e0.jpg

    Fig. Remove the water pump sprocket access plate from the timing cover -2.2L engine
  5. Attach Water Pump Sprocket Holding Tool J 43651to the sprocket using the access plate bolts to secure the tool to the engine front cover.
    Sprocket to water pump bolts Engine block to water pump bolt Engine front cover to water pump bolt Thermostat housing to water pump feed pipe 2 water pump to engine block bolts Water pump

    30965cd.jpg

    Fig. Water pump mounting-2.2L engine
To install:
  1. Use a threaded stud in the water pump hub to align the hub to the water pump sprocket.
    Water pump and bolts Thermostat housing to water pump feed pipe Engine front cover bolt and engine block to water pump bolt. Tighten the bolts to 15 ft. lbs. (20 Nm) 2 of the water pump sprocket to water pump bolts
  2. Remove the threaded stud.
    Last water pump sprocket to water pump bolt and tighten the sprocket bolts to 89 inch lbs. (10 Nm).
  3. Remove the tool.
    Water pump sprocket access plate to the timing cover and tighten the bolts to 89 inch lbs. (10 Nm) Splash shield Right front wheel Exhaust manifold, if removed
  4. Fill the cooling system.
  5. Connect the negative battery cable.
2.4L Engine
  1. Before servicing the vehicle, refer to the precautions section.
  2. Disconnect the negative battery cable.
  3. Drain the cooling system.
  4. Remove or disconnect the following:
    WARNING Do not rotate the flex coupling more than 4 degrees or damage may occur. Oxygen Sensor (O 2 S) electrical connector Exhaust manifold heat shield Coolant inlet housing bolt through the exhaust manifold Exhaust manifold brace-to-manifold bolt Manifold-to-exhaust pipe studs Coolant inlet housing-to-water pump cover bolt Exhaust pipe from the exhaust manifold by pulling it downward Coolant inlet pipe from the oil pan Brake vacuum pipe from the camshaft housing Exhaust manifold from the cylinder head Heater hose from the heater outlet pipe Timing chain cover and tensioner Water pump cover-to-engine bolts 3 water pump-to-timing chain housing nuts Water pump and cover assembly Water pump cover from the pump

    f9cdfa8.jpg

    Fig. Exploded view of the water pump mounting-2.4L engine
continue...

Oct 22, 2009 | 2002 Oldsmobile Alero

1 Answer

Water cooling of exhaust


If its a newer model Mercury the Relief exhaust port does not receive water at an idle, all the cooling water is discharged through the Propeller hub exhaust and Tattletale.

Sep 20, 2009 | Boating

1 Answer

Water from exhaust


some water is normal but if you are loosing coolant, running hot or if water from exhaust smells like antifreeze you have a problem (head gasket or cracked head)

Jun 17, 2009 | 1991 Honda Accord

Not finding what you are looking for?
2004 Honda CR 250 R Logo

Related Topics:

163 people viewed this question

Ask a Question

Usually answered in minutes!

Top Honda Experts

Arnie Burke
Arnie Burke

Level 3 Expert

4514 Answers

yadayada
yadayada

Level 3 Expert

69199 Answers

Gino Cussen
Gino Cussen

Level 2 Expert

216 Answers

Are you a Honda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...