Question about 1976 Honda CB 100

2 Answers

Hi the indicator lights on my honda lead scooter are not working haedlight is fine what could be the problem

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 5 Answers

Locate and disconnect flasher relay, join the two wires together, turn on the ignition switch then try the indicator switch, (both sides). if the indicators then light up, your relay is faulty, if they don't light up check your indicator bulbs, if they are all OK. I would then check the Indicator switch next.. good luck...

Posted on Apr 13, 2009

  • honda square Apr 14, 2009

    PS. check the ign. feed wire to the relay is alive when the ignition switch is on, if not alive, you may have just blown a fuse???

×

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 162 Answers

Coul;d you just clarify that the lights are not coming on at all or are they not flashing? if they not flashing then it is your relay which is usually located under the seat but if there is nothing happening when you switch the indicators on then you will have to check the wiring from your switch to the light itself. if you take a piece of wire and a bulb preferably from your bike as this will be 6 volt, take this wire and connect it to an earth spot such as the frame then connect the other end to the outside edge of the bulb. switch on indicators and touch bulb with wire on it to the wire which feeds the base of the original bulb to see if you are getting any voltage through it. if nothing happens the you will have to repeat the following to all four points wher it usually goes and if still nothing then you will have to go further back in the loom to find the problem. but you will find the problem with an auto electrician will find problem a lot faster and should be quite cheap as it is only a moped.

Posted on Feb 25, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

When i turn the key on the scooter, nothing happens and nothing lights up, i have checked connection and all show power, the power indicator does not move, yet batterys are fully charged any ideas TIA


hi Shane, i recommend you check the fuses on the tiller ..

if all okay check the fuses located on the battery leads , if fitted and check the connections to the controller which is located under the foot panel..


Regards
Rob

Nov 05, 2015 | Pride Celebrity X 4-Wheel Electric Scooter...

1 Answer

Why does my scooter keep stopping?


hi Samantha, what is brand and model no of this scooter ?

Regards

Aug 20, 2015 | Health & Beauty

1 Answer

Hazards & turn signal dont work when haedlights are on


check your turn lights, when one light dont work, your signal lights dont flash

Jun 08, 2012 | 1993 93 Oldsmobile Cutlass Supreme Light...

2 Answers

Rascal 600


Neil wood, the Rascal 600 DOES use an on board charger. What signal is the white wire looking for to make the scooter move is the question. 28v?

Apr 20, 2012 | Electric Mobility Power Electric Scooter...

2 Answers

Honda scv 100 won't electric start, but the lights work fine. How do I fix it?


Hi,
Check the starter relay in the battery compartment. Look at the relays terminals and clean it, test it by means of activating the electric starter, a clicking sound should be heard, if not replace the relay. If there is a clicking sound and motor would not run, the starter motor have a problem.
Try Youtube for video repairing of that starter. just type the model and problem of your scooter in their search box.
Hope that helps you out.
Thanks for using FixYa!

Jul 24, 2011 | 2006 Honda SCV 100 Lead

1 Answer

Hi i have a cpi formula r50 and the lights and indicators have stopped working any ideas


Hi, Markham451 start with your light fuse and wire connectors for more information about your question and free downloads that you will need please visit the websites below. Good luck and have a nice day.
Chinese Scooter Club View topic Indicators not working
Indicators turn lamps not working FIXED
https://absolutelyscooters.net/service-manuals.html
CPI Scooter Parts Racing Planet USA
CPI Formula 50 2009

May 29, 2011 | 2008 Cpi Formula R

1 Answer

Just bought my dad a second hand go go 3 wheel elite scooter


Hi Linda. Sometimes if there is a blown fuse or faulty connector on the battery leads, the charger thinks the batteries are charged as the voltage coming out of the charger rises to the high level. Some chargers will cut out if this happens. It is probably not the charger.
Make sure the batteries are plugged in correctly, sometimes during transport they will get knocked and become disconnected.
Also make sure that the battery terminals are not loose where the wires connect to the batteries.
Good luck. Neil.

May 21, 2010 | Pride Mobility Products GoGo Ultra X...

2 Answers

Honda Melody Mini NP50D scooter - electrical issue?


if teh lights get brighter and the signals blink faster as you rev up the engine. then I would say you need to replace the battery

Mar 17, 2009 | 1988 Honda CB 1

Not finding what you are looking for?
1976 Honda CB 100 Logo

401 people viewed this question

Ask a Question

Usually answered in minutes!

Top Honda Experts

Arnie Burke
Arnie Burke

Level 3 Expert

4497 Answers

yadayada
yadayada

Level 3 Expert

63661 Answers

Gino Cussen
Gino Cussen

Level 2 Expert

216 Answers

Are you a Honda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...