2006 Yamaha Royal Star Venture Logo

Related Topics:

A
Anonymous Posted on Mar 04, 2013

Removing driver seat 2006 royal star venture - 2006 Yamaha Royal Star Venture

2 Related Answers

Anonymous

  • 2 Answers
  • Posted on May 11, 2009

SOURCE: Removal of factory seat on Yamaha Royal star 1300

The seat comes off with a key but I had to remove the passenger seat first unable to squeeze the main seat (what you need off) out from between tank and rear seat.Coolant resiviour and tool compartment is under there too.Good luck with that.It's the same as the ignition key. JM

Ad

Anonymous

  • 73 Answers
  • Posted on Jul 26, 2010

SOURCE: How to remove the drivers seat on a 2004 royal

Look under the seat (either side) 1"-2" behind the back of the fuel tank; you'll see a nut holding a threaded shaft into tabs protruding from the frame. Loosen and remove the nuts on both sides, lift the seat up, until the threaded shafts are completely free of the tabs, then move the seat straight forward. That will free a catch, molded into the underside of the seat, from a loop in the frame that holds the back of the seat down and keeps the seat from moving side-to-side. Reassembly is in reverse order: there is a specification for the nuts - 5 ft.-lbs. (7 nm) - but it's usually sufficient to tighten the nuts snugly on both sides

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

Replace headlight assembly 1996 Yamaha XVZ1300.

Yamaha XVZ1300 Royal Star Motorcycle Lighting ' Headlights ...

https://www.motorcycleid.com > ... > Lighting > Yamaha
Find the right Motorcycle lighting products for your Yamaha XVZ1300 Royal Star in our inventory. ... 2009; 2008; 2007; 2006; 2005; 2004; 2003; 2002; 2001; 2000; 1999; 1998; 1997; 1996 ... Show Chrome® - LED Turn Signal Light Upgrade Kit.

Replacing The Headlight Bulb - Yamaha Royal Star Venture ...

https://www.manualslib.com > ... > Owner's manual
Yamaha Royal Star Venture XVZ13TFX Manual Online: Replacing The Headlight Bulb. This model is equipped with a quartz bulb headlight. If the headlight bulb ...

Motorcycle Parts Yamaha Royal Star - Amazon.com

https://www.amazon.com > Motorcycle-Parts-Yamaha-...
Results 1 - 48 of 828 - 1996-2001 YAMAHA ROYAL STAR UNI MOTORCYCLE AIR FILTER ... Z-OFFROAD Upgrade 7 Inch LED Headlight + 4.5 Inch Fog Passing ...
0helpful
1answer

How to remove carburetor from yamaha royal star venture

Well.... first - there's four of them.

You can try YouTube or invest in a Service manual to get it all done correctly... Its starts with getting the tank off, and that starts with removing the riders seat.

Although you are NOT talking about jetting the carbs and this only only two this site has AWESOME details and the Venture is not terribly different.
https://sites.google.com/site/vstar1100kb/home/tuning/carb-jetting
and
https://docs.google.com/file/d/0B-KrKk_YXL4Tdm5OU1I4S2pMUFE/edit

Bob

If you need further help, I’m available over the phone at https://www.6ya.com/expert/robert_beef7390c57fac0d

1helpful
2answers

I need a new battery for my 2000 Yamaha royal star venture...what kind do I need

Take your battery out ... probably have to remove the seat to get to it. Two bolts at the rear of the seat, them the battery hold down clamp. Unbolt the wires and remove. When you get it out, take it to the auto parts store or to your Yamaha Motorcycle shop and get a replacement. The Yamaha shop will know exactly what you need when you give the make and model of motorcycle (you will not have to take the battery). You might as well take the batgtery with you as there may be a 'core fee' and if you have the battery, you can avoil the core fee and a second trip to get the fee back.

Simple.

Thanks for your question @ FixYa.com
2helpful
1answer

How do you get to the front spark plugs on the royal star venture

Remove seat, fuel tank and its best to remove the strut between the top of the cylinder and the frame....looks like a dog bone.
3helpful
1answer

How to remove the drivers seat on a 2004 royal star venture.

Look under the seat (either side) 1"-2" behind the back of the fuel tank; you'll see a nut holding a threaded shaft into tabs protruding from the frame. Loosen and remove the nuts on both sides, lift the seat up, until the threaded shafts are completely free of the tabs, then move the seat straight forward. That will free a catch, molded into the underside of the seat, from a loop in the frame that holds the back of the seat down and keeps the seat from moving side-to-side. Reassembly is in reverse order: there is a specification for the nuts - 5 ft.-lbs. (7 nm) - but it's usually sufficient to tighten the nuts snugly on both sides
Not finding what you are looking for?

552 views

Ask a Question

Usually answered in minutes!

Top Yamaha Experts

vince

Level 3 Expert

2530 Answers

Steve Sweetleaf
Steve Sweetleaf

Level 3 Expert

1212 Answers

littlewheel

Level 2 Expert

122 Answers

Are you a Yamaha Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...