Question about 2000 Buell Blast
Witch plug is the engine on a buell blast 2003
Pull both of the plugs out of the rubber lines behind the left rear passenger foot peg. one is a vent line for the primary and it builds up some condensation that needs to be removed anyway. The engine oil will come out pretty black. Make sure you cap the breather hose after it drains. the engine oil I usually let empty then put some oil in and cap it after it starts pouring out of the drain line a little. this helps ensure your not trapping any air in the line that could get sucked up later on by the oil pump. The primary oil drain is below the shifter on the left side of the bike. Remve the bolt and put 1 quart of harley sportster primary oil in. you will most likely have to pull the left foot rest off the bike to access the fill door located behind the left drivers foot rest.
Posted on May 24, 2013
Should be lower, but may have been switched; drain both, you're doing a service!
Posted on Jul 09, 2009
a 6ya Mechanic can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Tips for a great answer:
Apr 11, 2013 | 2002 Buell Blast
May 15, 2012 | 2005 Buell Blast
Apr 08, 2012 | 2001 Buell Blast
Jan 06, 2012 | 2000 Buell Blast
Sep 01, 2011 | 2006 Buell Blast
Jun 08, 2011 | 2001 Buell Blast
Aug 17, 2010 | 2003 Buell Blast
Jul 01, 2010 | 2003 Buell Blast
Aug 03, 2009 | 2003 Buell Blast
Feb 28, 2009 | 2003 Buell Blast
352 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: