Question about 2005 Hyosung GT 650 R

1 Answer

No electrics got chinesse import gy125 to get from a to b had nothing but problems which have been sorted quiet easy. coming home from work the lights began to dim woke up in morning to find had no electrics what so ever lights indicators electric start horn the lot. bike starts with a kick no problem battery held a charge when i charged it as soon as i put back on the bike all started to work again buy the time i got home again the battery had run out agin and all stoped working again. any ideas would be a great help. thanks.

Posted by on

  • charles lill May 11, 2010

    i have had many of these bikes in the workshop with electrical mechanical ive even had to reweld frames my advice to you is sell and get a ktm or apache as these bikes never quit giving out problems and imm suprised a bike if its 2005 has lasted that long /the fix for your problem is if the battery is new charge 16 hours at 1-2ampers via trickle charge check that the bulbs are correct watts for the bike as they are not uk standard and if you dont know the age of the battery get a new one and charge as above

  • Anonymous Mar 22, 2014

    Hi guys, having an issue with my 09 530 exc, I just dropped the oil out of it, was starting off the battery just fine before, but after the oil change I'm getting nothing out of the electrics, no horn, lights, blinkers or electric start. It will kick start just fine though. Any suggestions what I might have done to cause this? I checked the fuse and it looked fine, swapped it out anyway. Also checked with a friends battery and still nothing.

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 66 Answers

Test the charging system w/ a multimeter,to test the alternator and voltage regulator and wiring w/ connectors.

Posted on Feb 19, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My husbands Acer laptop was bought July 2009. Yesterday it stopped working. backlight comes on but nothing else. The hard drive light does not come on.


It seems that you have an error on your bios or the motherboard.If you do not have extended waranty call up the call centre and register you complaint. Look for the nearest Acer service centre to have the fault estimated. Before you send the laptop for service get all your data on the harddisc transferred. This is important as all your photos/videos should not go public and must be protected. It is easy to transfer them if you can ask for the hardisc to be attached to a conversion USB cord to be loaded into a USB or your Home system. I hope you will do accordingly and my advice helps. Good day

Aug 14, 2010 | Acer Computers & Internet

2 Answers

My Kenmore Ultra Wash Quiet Guard


take kick plate off get book out how to reset board

Apr 24, 2010 | Kenmore 15899 Built-in Dishwasher

1 Answer

Heat/AC unit in working order, plugged in 20Amp outlet.. no fan?


Hi1
Do you have at least 200 volts at your outlet? Check that first. You said you brought it home from work, so when you plugged it in at home did you plug it into a 120 volt recepticle?

Jan 01, 2010 | Emerson Quiet Kool 12NW46HK Air...

3 Answers

How to unlock Nissan Micra Boot that wont respond to remote


The problem is water getting into the boot switch and shorting out the contacts. A new boot switch is required which you can get from nissan for about £55. I have recently fitted one myself and its a very easy and quick job to do.

Feb 05, 2009 | 2005 Nissan Xterra

1 Answer

My dishwasher just stop, the red light come on and nothing happen


check the filtrs in the machine are clear and the waste pipe is not blockedput it on rinse cycle and see if it empties

Jan 26, 2009 | Bosch 24 in. SHU66C02 / SHU66C06 Built-in...

1 Answer

Electrical


This is a problem with the Body Control Module (BCM), the dealer can run a test on it to determine if it is the problem for sure.
FixYa.com claims they have factory repair manuals, they have nothing of the sort, this is not to say some experts may have manuals, we do, but we work from home and in most cases have a small library. Experts are not employed by FixYa.com, we help free of charge as much as we can with the general automotive knowledge we have learned while working as auto technicians, specific test values, repair procedures and illustrations are unique to each car line, these are not in most cases available to us. Thanks for using FixYa!

Oct 22, 2008 | 1992 Buick Park Avenue

1 Answer

Abs light, engine light


I have the same car, same problem and I've been doing some research. It seems to be that the most common problem is a faulty ABS sensor that causes the car to go into "Limp Home Mode". Limp Home Mode is automatically initialized when the car senses that it has some sort of electrical or mechanical issue. This is most likely what your experiencing, because I, and many other X-type owners are as well. Good Luck.

Jul 15, 2008 | 2003 Jaguar X-Type

1 Answer

Maytag quiet series 300 problem model MDBH955AWB Set washer to run on Delay last night. All lights were go. Has worked in the past. It didn't run and now, no lights, and doesn't operate. No problem...


same problem...seems this appliance is a piece of ****....i have read nothing but bad things about it....i have the choice to pay 250 to repair it...or replace it....easy choice....

Jun 19, 2008 | Dishwashers

2 Answers

Quiet guard 3 dishwaher


QuietGuard3: Clean light flashing 7 times? Press Heated Dry, press Normal Wash, then press Heated Dry again and press Normal Wash again (that's 4 button-presses) and that should fix it.

Sep 23, 2007 | Kenmore 24 in. 15689 Built-in Dishwasher

Not finding what you are looking for?
2005 Hyosung GT 650 R Logo

352 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hyosung Experts

Arnie Burke
Arnie Burke

Level 3 Expert

4514 Answers

yadayada
yadayada

Level 3 Expert

70374 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22041 Answers

Are you a Hyosung Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...