Question about 2004 Honda XR 125 L

1 Answer

HOW DO I CHANGE BRAKE PADS ON HONDA XR125

DO NOT KNOW HOW TO GET THEM OUT OR REPLACE

Posted by on

  • Anonymous Mar 27, 2009

    My problem is similar to bigianorm's, only I have an 06 XR250. There doesn't seem to be any information any where!

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 52 Answers

For rear \/ \/ \/ \/
1.There is a alan head screw that goes through the top of the brake pads. you want to remove that next take a flat head screw driver stick it between the pad and disk turn it to loosen the grip. slide the pads out put the new ones back it ,then put the screw back in. pump brakes before you ride.

For Front \/ \/ \/ \/ \/
remove any disk guards, there are two bolts that connect the caliper to the fork remove those, use the screwdriver again to loosen the grip. then Remove the screw and take out pads and put the new ones back it ,then put the screw back in. pump brakes before you ride.

Posted on Jun 01, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Honda XR125 won't downchange gears


Your shift forks have been bent, this is usually caused by "slamming gears" meaning not using the clutch or while standing on the pegs inadvertently standing on the shifter as well. Cases need to be split and forks replaced.

Sep 29, 2014 | Honda XR 125 L Motorcycles

1 Answer

Leaking brake fluid from right front wheel 1995 honda passport


Sounds like from what you describe it's a leaking break caliper. The best thing to do is get a rebuilt one. It's best to replace them in pairs. Also replace or clean the brake pads thoroughly!

Dec 20, 2012 | 1995 Honda Passport

1 Answer

2006 Honda XR 125 L - 5


Check calipers and seals clean and free the brake pistons if any seals are pinching replace them

Jan 26, 2012 | Honda XR 125 L Motorcycles

1 Answer

How do i replace brake pads


Are you talking about the car brake pads? Front wheel brake pads are usually easy to change as compared to the rear. You'll have to remove the front wheel to proceed. If this is your first time replacing brake pads, I suggest you take it to the mechanic or watch the video series below to get an idea. Good luck!
http://www.youtube.com/watch?v=xOkbcAdw0Es

Jan 09, 2010 | 1990 Honda Civic

1 Answer

How to change rear brake pads for a honda 2007 ridgeline


The 2007 Honda Accord is equipped with four wheel disk brakes. Disk brakes wear down and require regular maintenance. Worn brake pads can cause squeeling and grinding noises, as well as reduced braking power. Improperly maintained brake pads can cause damage to the brake rotors as well as brake failure. Save on labor costs by replacing your own brake pads.www.lightdeal.co.uk

Jan 07, 2010 | 2007 Honda Ridgeline

2 Answers

Replace brake pads


go to www.youtube.com for some video's.
Search for brake pad replacement, as you may not get the exact vehicle, you will get the idea.
Keep in mind, if you don't have the tools, or any experience, get some help.

Dec 19, 2009 | 1995 Honda Accord

1 Answer

Front brake lever is very hard/solid when i


I am thinking that you need to change the fluid and replace the brake pads. Over time brake fluid attracts water and it states in the manual that brake fluid should be changed. I change fluid in mine every other year.

Oct 01, 2009 | 1982 Honda GL 400

1 Answer

Brake pads


hi no special tools needed to change the pads on this bike

cheers jay

Jun 24, 2009 | 2005 Honda CBR 125 R

1 Answer

Oil filter change where is it and how to replace


It doesn't have a proper oil filter, for this reason you have to change the oil regularly (every 1000 to 2000 miles).

For information on how to change the oil try this link:

http://hondacg125.awardspace.com/

The honda xr125 and honda cg125 have the same engine. I have changed the oil several times on my xr125 and I can confirm that you follow the same procedure for both bikes. There is also an oil change demo on youtube for the cg125:

http://www.youtube.com/watch?v=Cas49yea4n4

Dec 09, 2008 | 2003 Honda XR 125 L

1 Answer

Replace rear brake cyllinders, rear brake pads, tank and left driveshaft


rear brake cylinders are straight foward you shouldn't have any probs withe brakes side of things. the drive shaft bolts on and off with no problems forseen i have done many just take your time and think before you act good luck

Jul 31, 2008 | 1986 Honda Accord

Not finding what you are looking for?
2004 Honda XR 125 L Logo

654 people viewed this question

Ask a Question

Usually answered in minutes!

Top Honda Experts

Arnie Burke
Arnie Burke

Level 3 Expert

4514 Answers

yadayada
yadayada

Level 3 Expert

70387 Answers

Gino Cussen
Gino Cussen

Level 2 Expert

216 Answers

Are you a Honda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...