Question about 2005 Kymco Stryker 125

3 Answers

Oil bolt has rounded of what size is the bolt??

I have a kymco ck 125 cc and the bolt on the bottom of the engine caseing that holds the oil in has rounded of and is slowly coming loose i need to know what size it is so i can order a new bolt thanks

sean

ps
ignore the products category part i could find kymco ck 125 on it

the bike bolt size i am looking for is a kymco ck 125 cc 05 plate

thanks again

Posted by on

3 Answers

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 5 Answers

17mm m8

Posted on Aug 29, 2015

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 2 Answers

Fit in a helical, and keep in the same bolt, that should solve your problem

Posted on Jun 10, 2009

  • Level 1:

    An expert who has achieved level 1.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 2 Answers

17mm head with 10mm threads

Posted on Dec 03, 2012

  • 1 more comment 
  • Steve Brander Dec 03, 2012

    bore a 3/4mm hole as central as you can,either try to thread it,buy an easy out set,or try superglueing a pin,leave overnight and try. if no succes then boring and easy out is only way to go.

  • Steve Brander Dec 03, 2012

    If you can bore small hole then put a nut on first, screw in like normal, use bolt to tighten to casing , then undo.

  • Steve Brander Dec 03, 2012

    that was a 3 or 4mm hole

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I need a workshop manual for a kymco zing 125?


Hi, Craig you will probably have to visit your local dealer because this was all I could find for more information about your question and valuable "FREE" downloads that you will need please click on the links below. Good luck and have a nice day.
Kymco Zing 125 Manual Documents

Jun 06, 2016 | Kymco Zing 125 Motorcycles

1 Answer

What is the oil capacity on a Kymco Zing 125 please.


I would put in 2 qts and then slowly add part of the third till the level comes up. No bike, not even a big one holds much more than 3 qts oil. But I'm sure you will safe at putting in 2.+. Hope this helps.

May 28, 2011 | 2005 Kymco Hipster 125

1 Answer

Hi . where is the valve timing mark on my kymco-125 hipster cam -sprocket.


the valve timing mark is on the flywheel on the Hipster's.

Remove the large flat blade screw from the top of the left hand side casing. Turn the engine either by hand (using kickstart with ignition off), turning rear wheel in gear, or by removing the "kymco" badge with three 8mm bolts and using a 19mm deep socket on the crank, until you see two marks (one says F one say T) the F one is the advance firing mark, the T mark is the timing mark. Keep turning the engine over and watch your valves, wait for the exhaust valve to close, inlet valve to open and then close again then the next time you see the T line will be TDC. This is where you set your valve timing from.

Oct 06, 2010 | 2002 Kymco Hipster 125

1 Answer

Hi i have a ktmco stryker 125 when i take the casing of to see the fiy weel and genarter there was oil in there tahts why no spark is there an oil seal there i can see a all


Yes there is a oil seal behind the flywheel the engine will need splitting .Maybe try draining the oil and starting with the cover off,Kymco are not known for thire quality so may be coming from a crack,be careful with the cover off you dont want to loose a finger ,use a torch if it drips directly from the bottom I expect it is the seal.

Mar 04, 2010 | 2005 Kymco Stryker 125

2 Answers

Gear oil change


Somewhere on the bottom or bottom outside edge of the gearbox is a drain plug. Drain the oil and put the plug back in place. Somewhere on the top of the gearbox casing, including the left and right outer case covers, you will find a dipstick for checking the oil level. Fill via the dipstick hole. Some bikes don't have an actual dipstick but only have a top plug. Normally you will find it near the kick starter lever. When no dipstick is provided, they expect you to drain the old oil and then re-fill with the amount of oil specified for the bike. Use 10w40 motor oil. NEVER use synthetic oils. They can screw up the clutch.

Nov 19, 2009 | 2005 Kymco Stryker 125

1 Answer

Where can i get mannual


hi m8 dont know about the manual but if u go to ebay.com and tape in kymco stryker they have loads of engine parts hope this helps m8.. will g..

Jan 26, 2009 | 2001 Kymco Stryker 125

1 Answer

Drain and change oil


I can't tell you all the particulars from the limited amount of pictures of your bike. -Remove the oil drain bolt on the bottom of the crankcase (the universal bolt size for bikes use a 17mm wrench). -Drain the oil (remember to recycle). -Re-install the drain bolt with a new sealing washer if necessary. -The oil fill cap should be some where on the top of the crankcase. About 1 or 25mm in diameter with a raised tab for turning. -Fill with recommended oil. -There are 2 ways to check oil level on dirt bikes: 1) Oil level check bolt. On the right side cover. 2) Oil level site glass. A 1 round piece of glass on the side of the crankcase. Usually by the kick start & R brake lever. -Always check the oil level with the bike upright (as if you were sitting on it). -Check bolt - fill with oil slowly until oil comes out of the check bolt and re-install it. -Sight glass - fill with oil to cover 3/4 of the sight glass. -Remember to hold the bike upright when adding oil.,

Nov 10, 2008 | 2008 Derbi Senda Baja 125 R

Not finding what you are looking for?
2005 Kymco Stryker 125 Logo

Related Topics:

347 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kymco Experts

yadayada
yadayada

Level 3 Expert

64052 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

4497 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21990 Answers

Are you a Kymco Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...