Question about 2007 Honda VT 750 Shadow

1 Answer

I have a 2007 honda aero. not quite sue how the choke works.

On a cold start, i turned the choke clockwise and then reversed it counter-clockwise. not exactly sure where the choke should be after the engine warms up. I am now having a hard time starting the bike.

should the choke be all the was counter clockwise?

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I' ll let you know if you sign up for my premium plan

Posted on Feb 18, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Why does my new Craftsman 4 cycle Trimmer's head turn counter clockwise


Curved shaft trimmers turn clockwise.. straight shaft trimmers turn Counter Clockwise. Also the Bump head is reverse threaded because of the engine rotation.

When using this trimmer , Angle the right side of the string line down so the grass gets thrown in front of you not at your legs.

May 30, 2015 | Craftsman Garden

1 Answer

How do you start a 19th mtd riding mower


Put your left foot on the clutch pedal and push down all the way on the clutch. Move the throttle lever all the way to the top, this turns on the choke. Turn the key clockwise, to the right, to start the engine. Once the engine has started, move the throttle lever down to turn off the choke. You only need the choke when the engine is cold. If you use the choke while the engine is hot, you can flood the engine (too much gas) and this will fowl the spark plug. If you have flooded the engine, turn off the choke by lowering the throttle lever and try to start the engine a few times. If the engine doesn't start, then you may need to wait 20 to 30 minutes before trying to start the engine again. If the engine still does not start, then you can remove the spark plug to dry and to clean the spark plug. With the spark plug out, turn the key to the start position for 10 seconds, to push out excess fuel and fumes. Replace the spark plug and try starting the engine without turning on the choke.

Oct 08, 2014 | Garden

1 Answer

2002 Jeep Liberty heater works, but defroster blows cold air


on all cars made
(you can read the FSM at any time and see exact way and tests)
1: damper stuck or its actuator bad. ( 3 kinds uses on all cars)
2 ;controls to damper actuator bad.
3: wires between both faulty.

3 types are motor, vacuum servo and cable.
you have 2 of the 3.
the blend is a motor actuator
the recric is vacuum servo
the motor types are very hard to test, read the FSM.

ill post the calibration

quote

Use this procedure to ensure that the A/C-heater control is correctly calibrated to the blend door actuator. If the calibration is not correct, the heating-A/C system may experience a condition where full heating or cooling capabilities cannot be obtained.
Manual calibration of the A/C-heater control should be performed if the blend door actuator is not functioning properly, or if the temperature of the conditioned air is too warm with the temperature control in the full cold position or too cool with the temperature control in the full hot position.
NOTE This calibration procedure can only be started within the first ten seconds after the ignition switch has been turned from the OFF position to the ON position. Make sure that the battery is fully charged prior to beginning the calibration procedure. NOTE The length of the pause made at each end of the temperature control rotation (sweep) is important. 5 seconds) or too long (greater than 1.5 seconds).
  1. With the ignition switch in the OFF position, move the temperature control to its middle (12 o'clock) position.
  2. Turn the ignition switch to the ON position (do not start the engine).
  3. Within 10 seconds of turning the ignition switch from the OFF to the ON position, perform the following rotations (sweeps) of the temperature control.
    • From the 12 o'clock position, rotate the temperature control counter-clockwise to the full cold position. Pause one second.
    • Rotate the control clockwise to the full hot position. Pause one second.
    • Rotate the control counter-clockwise to the full cold position. Pause one second.
    • Rotate the control clockwise to the full hot position. Pause one second.
    • Rotate the control counter-clockwise to the full cold position.

Oct 05, 2014 | 2002 Jeep Liberty

1 Answer

Stalls when it warms up leave it for 5 minutes then it starts then does it again on a 1987 Volkswagen cabaret


Is it carburated? If it is then adjust the coke until the butterfly is barley closed when cold. This is accomplished by loosening the choke spring cover screws and turning counter clockwise to loosen the spring tension on the butterfly. If the spring is too tight it causes the engine to food and die.

Jul 29, 2014 | Cars & Trucks

1 Answer

What is counter clockwise Firing Order


certain manufacturers make their engines rotate 'counter clockwise' to accomodate certain mechanical configurations ,this means the firing order is reversed but still starts from No 1 cylinder , these type of engines are not widely used as like Radial and Rotary engines they are more technical to engineer and so are more expensive

Jul 12, 2014 | 1997 Honda Civic

1 Answer

My 2007 honda shadow starts with choke on but when push choke in dies out


Your fuel mixture may just need adjusting or your carbs may need some cleaning the adjustment is a bit painful as it requires a special tool for the carbs if you take it in for a oil change ask em about adjusting the carbs for you - a good shop will have it done in a jiffy

Jun 14, 2014 | 2005 Honda VT 750 Shadow Aero

1 Answer

Faucet handle turns wrong way


You bought two cold water faucets. The threads are reverse on the hot water faucet. Exchange the wrong one at the store you bought it from.

Dec 31, 2012 | Moen Plumbing

1 Answer

75 chevy c10 flooding excessively i have replaced float and rebuilt carb can i abandon thermastatic choke


yes you can but may cause problem with cold starts.. is the black plastic choke thermostat adjustable? if so loosen the 3 flat head screws, do not remove them,, rotate choke thermostat counter clock wise until you see the choke butter fly start to break open.. stop and turn back clockwise about 1/4 of a turn.. that should give you just enough choke to start cold engine

Jul 16, 2012 | Cars & Trucks

1 Answer

2006 Honda 750cc Shadow Aero starts with choke, runs for a minute, sputters and stalls. Won't start again for a couple of days, then starts right up. Electrical?


Hi there
I once had a wee car,whenever it got too much petrol inside itself it refused to go anywhere and had to rest for some time and you had to be very careful with the choke and the petrol so it did not swallow too much of it and need another rest.
kolbrun

Apr 02, 2012 | 2004 Honda VT 750 Shadow Aero

1 Answer

I just bought a 1999 Honda Aero and it did not come with an owner manual. Where is the choke on this bike. Is there any free down loads with "getting started" on the Honda Aero/shadow of this...


The choke is on your left hand handle bar, it is the black slide down lever. 1. Push the lever inward to choke the bike 2. give the throttle two turns and start the bike. ( do this so you don't drain your battery, even with a new battery you need give the bike the gas to start or you will have to recharge the battery) You will hear the engine change pitch when it warms up, push the choke upwards and the bike should idle on its own.

Mar 05, 2011 | 1999 Honda VT 1100 C3 Shadow Aero

Not finding what you are looking for?
2007 Honda VT 750 Shadow Logo

Related Topics:

166 people viewed this question

Ask a Question

Usually answered in minutes!

Top Honda Experts

Arnie Burke
Arnie Burke

Level 3 Expert

4514 Answers

yadayada
yadayada

Level 3 Expert

71525 Answers

Gino Cussen
Gino Cussen

Level 2 Expert

216 Answers

Are you a Honda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...