- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
press select and adjust buttons simultaneously until hour display blinks,adjust hour display by pushing adjust button,push the select button to highlight the minute display , use the adjust button set your minutes , press select button to resume clock mode
The functions key is also your tripometer button. so depress the trip button untill it displays the time. Now, press and hold it in untill the first number blinks.let it go. now press it quickly untill you have the correct number for that time. now with the digit still blinking, press it again and hold it in again, untill the next number bilnks. Keep doing this untill your time is what you want. and on the last digit, press and hold it in again will set you back to your normal, and you can press it to get your tripometer, time, and odometer
View the service manual at this URL : http://www.scribd.com/doc/17625151/servicemanual1602082008 : and scroll down to printed page 3-62 or electronic page 120.
Copying from that page: 1. Turn the main [ignition] switch to "ON". 2. Press both left and right buttons simultaneously [i.e., the 2 buttons below the speedometer glass] until both hours and minutes flash 3. Push the left [mode] button and the hour display will flash 4. Push the right [right] button to change the hours. 5. Push the left button and the minute display will flash. 6. Push the right button to change the minutes. 7. Push the left button and both hours and minutes will flash. 8. Push the right button for two seconds to set the clock.
turn the bike ignition on or to accessory, then turn radio to off. You will then see a sreen with the word set on the lower right. Next locate the buttons on the far right of the radio. Find button number 6 and push. Now you will see a screen with the clock in the middle and on the left will have hrs+ and hrs- and on the right you will see min+ and min- . Push the buttons next to desired function. For example if the clock is displaying 4:10 and it needs to read 5:30 then push the hrs+ button once and push the min+ several times until the 10 changes to 30. When the correct time is displayed turn your bike off. Now turn the bike on and turn the radio on, walla! you should have the correct time.
on the x9500 that uses the same engine there's a reset button to press after a service hidden under a front panel, on some of the other Piaggios it's reset by using bottons on the speedo. so sorry I can't actually tell you on this model, but it will be along those lines.
The Gilera SC is the same as a Derbi GPR ,right?
This is how I change the time on my Derbi
Tap the button until it goes to the clock then hold it in until it starts flashing. Tap to change the hour then leave it for a second and it will move over to the minutes and cycle through, just tap it to stop on the right time.
The batteries are **** though so don't expect it to keep the time, you'll find yourself having to set it nearly every time you start your bike.