Question about 2000 Triumph Daytona 955i

1 Answer

955i engine torque settings?

I have a 2000 Daytona that has dropped a rod, i'v replaced & renewed everything nessesary. I need to know what the torque settings are as i am putting it back together, ie; crankcase halves, head bolts etc. Any help would be greatly appreciated, cheers.

Posted by on

  • Anonymous Mar 15, 2014

    trippletree top nut torque setting

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 66 Answers

Tightening torques-cyl head-stage 1 -14 ft. lbs.,stage 2-19 ft. lbs.,stage 3-90 degree final turn. cam cover-4 ft. lbs., camshaft sprocket-11ft. lbs.,clutch hub-stage 1-38 ft. lbs.,stage 2-76 ft. lbs.

Posted on Feb 16, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Engine mounting bolt torque setting


Hi, Darren for this scenario you will need your service/owners manual if you can't find the first and best tool you ever bought for your Triumph, despair not, for a mere $0 you can download another one. For more information about your issue and valuable "FREE" downloads that you will need please click on the links below. Good luck and have a nice day.
http://www.triumphrat.net/speed-triple-forum/205506-2011-2012-engine-to-frame-torque-settings.html
675 Torque Specs and General Specs
Motor mount bolts
Triumph DAYTONA 675 Service Manual
Triumph Daytona 675 Owner Handbook Manual
OEM parts for Triumph

Jul 01, 2016 | 2010 Triumph Street Triple

1 Answer

What the torque settling on a 1.8spi vauxhall cavalier 1994


Cylinder head Renew bolts: Yes Tighten: 25 Nm Tighten: 90° Tighten: 90° Tighten: 90° Other engine tightening torques Main bearings Renew bolts/nuts: Yes Main bearings Stage 1: 50 Nm Main bearings Stage 2: 45°-60° Big end bearings Renew bolts/nuts: Yes Big end bearings Stage 1: 35 Nm Big end bearings Stage 2: 45°-60° Oil pump to cylinder block : 6 Nm Sump bolts : 15 Nm Sump drain bolt : 55 Nm Flywheel/driveplate :
  • Use new bolts and tighten as follows:
      • 1,4/1,6 = 35 Nm + 30° + 15°
      • 1,8/2,0 = 65 Nm + 30° + 15°
  • "Pot"-type flywheel = 65 Nm + 30° + 15°
  • Tighten drive plate to 60 Nm.
Clutch pressure plate : 15 Nm Crankshaft pulley/damper centre bolt : Use new bolts. Tighten centre bolt to 130 Nm + 40°-50°
Camshaft sprocket/gear : 45 Nm Camshaft/rocker cover : 8 Nm Inlet manifold to cylinder head : 22 Nm Exhaust manifold to cylinder head : 22 Nm Spark plugs : 25 Nm Lambda sensor (Oxygen) : 30 Nm Chassis tightening torques Front hub :
  • Tighten nut in three stages:
    1. 130 Nm
    2. Slacken off
    3. 20 Nm + 80°-90°.
Steering track rod end : New nuts 60 Nm Brake disc to hub Front: 4 Nm Brake caliper to carrier Front: 30 Nm Brake caliper/carrier to hub Front: 95 Nm Brake caliper/carrier to hub Rear: 80 Nm New bolts ABS sensor Front: 8 Nm ABS sensor Rear: 15 Nm Road wheels : 110 Nm
There you go pretty much covers everything hope that helps

Jan 11, 2015 | Vauxhall Cars & Trucks

1 Answer

How do I change the water pump on my 2000 chysler grand voyager


3.3 AND3.8 ENGINES TAKE OFF SERPENTINE BELT 15MM ON BELT TENSIONER . REMOVE 2 HOSES OFF PUMP. 5 ?BOLTS AROUND WATER PUMP. IT WILL COME OFF WITH ANTIFREEZE LEAKING OUT. HAVE DRAIN PAN UNDER . ALSO IT IS GOOD TIME TO CHANGE THE LOWER HOSES. REINSTALL WITH NEW GASKET, FILL SYSTEM, PUT HEAT ON HOT AND RUN UNTIL THERMOSTATE OPENS, AND CHECK FOR LEAKS, TORQUE IF NESSESARY ( ENGINE OFF)!!REFILL AT SIDE TANK

Sep 29, 2012 | 2000 Chrysler Grand Voyager

1 Answer

I have just replaced the cam chain on my 03 daytona 600 and need the cam bolt torque settings as i done have a manual. Please help!


Cam chain tensioner center nut is 28Nm. This is straight from the Service manual for the 03-04 Daytona 600

Dec 23, 2010 | 2003 Triumph Daytona 600

1 Answer

I have a v-6 2000 nissan xterra. What are the


Rod bearing torque

Step 1 - 10-12 ft.lbs
Step 2 - 60-65 Degrees more


Main bearing caps torque

66-74 ft. lbs

d6bcc92.gif

Jul 02, 2010 | 2000 Nissan Xterra

1 Answer

Need torque for a 2000 Toyota Celicia GT 1.8L


Crank Main caps Tightening Torque

For the 12 Pointed Head Bearing Cap Sub-Assembly Bolts
Start from center bolts and tighten in a clockwise rotation working out
Step 1 all bolts 22 Nm or 16 ft lb
Step 2 all bolts 44 Nm or 32 ft lb
Step 3 all bolts 45 degrees additional clockwise rotation using an angle indicator.
Step 4 all bolts 45 degrees additional clockwise rotation using an angle indicator.

Hexagon Head Bearing Cap Sub-Assembly Bolts
1ZZ-FE Engine 18.5 Nm (14 ft.lb)
2ZZ-GE Engine 18 Nm (13 ft.lb)

Connecting rod:
1. Apply a light coat of engine oil on the threads and under the heads of the connecting rod cap bolts.
2. Install and alternately tighten the 2 connecting rod cap bolts in several passes. Torque: 1ZZ-FE: 20 Nm (204 kgf-cm, 15 ft. lbs.) 2ZZ-GE: 30 Nm (306 kgf-cm, 22 ft. lbs.) If any of the connecting rod cap bolts does not meet the torque specification, replace the connecting rod cap bolts.
3. Retighten the cap bolts by 90° more
4. Check that the crankshaft turns smoothly.

moz-screenshot.pngmoz-screenshot-1.png

Mar 18, 2010 | 2000 Toyota Celica

1 Answer

I need the torque specs for the main and rod bolt for a 99 escort 2.0l engine


engine tightening torques
Main bearings Renew bolts/nuts No
Main bearings Stage 1 43 Nm
Main bearings Stage 2 85 Nm
Big end bearings Renew bolts/nuts Yes
Big end bearings Stage 1 15 Nm
Big end bearings Stage 2 90°

Jan 21, 2010 | 2004 Ford Focus

2 Answers

Need to know how to replace the torque converter on transmission for 2000 Ford F250 Superduty truck. Put it in and tried to bolt it up but it didnt work. Need to know when you put the torque converter in...


There is no set amount of turns to get it to lock in. Good rule of thumb is if you can get your fingers behind it its not back far enough. What you have to do is turn it and kinda **** it back and forth. You turn it and pull it and push it back in quickly. After a few times it should drop in. Can take a few minutes to get it in.

Sep 20, 2009 | 2000 Ford F250 Super Duty Crew Cabs

Not finding what you are looking for?
2000 Triumph Daytona 955i Logo

452 people viewed this question

Ask a Question

Usually answered in minutes!

Top Triumph Experts

Arnie Burke
Arnie Burke

Level 3 Expert

4514 Answers

yadayada
yadayada

Level 3 Expert

74316 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22082 Answers

Are you a Triumph Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...