Question about 2004 kawasaki VN 1500 Vulcan Classic

1 Answer

Where is the starter on a 2000 vulcan 1500 nomad?

Does the starter have to be removed thru the clutch housing or is accessable from somewhere else?

Posted by on

  • tml61747 Apr 09, 2009

    hey thanks, but you need to remove the radiator in order to get the darn thing out. thanks for the help.

  • Anonymous Mar 16, 2014

    replacing engine mounts on 1500 vulcan nomad

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

The starter is in the lower front part of the engine.
It is not connected to the Clutch..

Posted on Apr 09, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Need radator for kawasaki vn 1500 classic tourer 2001 is the driffter the same radator as the vn 1500 classic plz hellllllllllllp


TO ALL VN1500 OWNERS....This once happen to me,
I went to the garage to start the bike "Nothing ""The first thing is the lights are bright but no turning over,Next you think the solenoid is kaput but the answer was very simple and the fix takes 30 seconds..
Do not take the bike to bits looking for other problems and look at the clutch leaver and you will see some wires going into a plastic shroud going into the switch in the clutch leaver, Make sure this has not popped out if its connection as it some times may do after a few years due to constant turning on the handlebars,
When this is not connected you will have a bike that will not fire up but comes alive and you will hear a clicking noise but this is from the engine carb area and every function of the bike will work but it will not turn over, Worth looking at and saves sixteen quid for a starter unit you never needed.

Feb 06, 2012 | kawasaki VN 1500 Vulcan Classic Tourer Fi...

2 Answers

I have a 1999 vulcan nomad and stopped and turned it off and when i went to crank it would do nothing. I have checked everything and even replaced the magnetic switch (starter selonoid) and still...


Have you checked if the power is reaching the starter ?
And the earth lead from yhe motor to the frame for corrosion or looseness ?
If the power is getting to the starter when you press the button and the leads are all clean then the next thing to check would be for a dead field on the sarter motor. Remove the starter and turn the armature around a bit then see if it works. this can also be the case if the brushes are worn.
Whether you can get the motor to work or not if you are satisfied that power is present at the stater motor when you activate the starter button, then the starter motor needs a service or swap. Do not trust it if you get it to spin after turning it as it will let you down at the worst possible time according to Murphy.

Feb 01, 2011 | 1999 kawasaki VN 1500 Vulcan Classic

2 Answers

Can you use mobil 1 Racing 4T 10W40 Full syn on final gear oil change


Yes. I have a 99 nomad and use valvoline 5w30 full synthetic. 30,000 miles with no problems

Jan 01, 2010 | 2001 kawasaki VN 1500 Vulcan Drifter

1 Answer

How do I take the rear tire off of a 2004 kawasaki nomad


I hope you have a jack... I had to remove the pipes and bags on my 04 vulcan nomad so I remove the cotter pin and pull the axle out of the rear hub. Then removed the spcer and rear brake. slide wheel assy. out of the drive hud on the left (removal of brake and spacer allow this) and drop the tire down. It's not hard...

Sep 21, 2009 | 2004 kawasaki VN 1500 Vulcan Classic

1 Answer

2001 kaw Vulcan 1500 will not start. new battery, starter relay


Check continuity at the kill switch? sidestand switch? Either could be malfunctioning. What does your manual tell you about the starter relay circuit?

Jul 20, 2009 | 2000 kawasaki VN 1500 Vulcan Classic...

1 Answer

Clutch slipping while cold, when warm/hot, it operates great.


I have a 2000 Vulcan Nomad FI & had a very similar problem. In fact, it's a very common problem with these bikes. I fixed it by replacing the Clutch Spring. (As Described here: http://www.gadgetjq.com/clutch_spring_replacement.htm

It cost me $40 and 3 hours of time with an impact wrench.

Jan 23, 2009 | 2004 kawasaki VN 1500 Vulcan Classic

Not finding what you are looking for?
2004 kawasaki VN 1500 Vulcan Classic Logo

486 people viewed this question

Ask a Question

Usually answered in minutes!

Top kawasaki Experts

Arnie Burke
Arnie Burke

Level 3 Expert

4514 Answers

yadayada
yadayada

Level 3 Expert

70365 Answers

chris

Level 2 Expert

232 Answers

Are you a kawasaki Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...