Question about 2006 Harley Davidson FXDBI Street Bob

1 Answer

Kawasaki 06 kx250 ,are wheels interchangable with kx125,kx250f ?

Are front and rear wheels and hubs the same ? i know that the same year kx125 and kx250f are the same as each other but unsure if 250 2 stroke is also the same

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 34 Answers

Im sure they are the same, me and my mates (125 and 250) intercange

Posted on Jul 31, 2009

6 Suggested Answers

fastboyz
  • 674 Answers

SOURCE: kx250f hard starting

odds are your your intake valve lash is tighter then spec or gone.
check that first

Posted on Nov 18, 2008

  • 3567 Answers

SOURCE: break in for rebuilt lower end kx250 2 stroke

Break in is just riding the bike easy for an hour, shifting through the gears w/o high revs. Now go out to the woods and have fun. Change gearbox oil after about 20 hours of riding to remove metal contaminates from the full break in.

Top rating due on this answer! Thanks arenacross91!

Posted on Apr 22, 2009

voodoomox
  • 1689 Answers

SOURCE: i have a kawasaki kx 250 2 stroke an it was

hi murray,

nice bike you have there.

have you checked on the carb ans see if the jet is right and the mixture is normal, this is usually the case if the carb is not tuned right.

better of reset the card, open it clean it, then set to default even if you are using your mixture of gas and 2t. just set to factory default. once it starts give it a few run, 1-2 hours, then set it to how you want your mixture to be.

hope this helps,

regards,

voodoo

Posted on May 17, 2009

  • 3567 Answers

SOURCE: could you tell me the year in which my kawasaki kx

The engine number will tell you what country the engine was made , what series the engine is and the production number. The frame number VIN is what will tell you the needed info. Call a dealer and give them the frame number and they should be able to tell you what you have.

Posted on Oct 05, 2009

  • 47 Answers

SOURCE: how to set the timing chain on a 2005 kawasaki

Timing chain marks??? Or marks on your cams?? On the cams you should have 2 marks on each side of your cam sprocket. They should be even with the top of your jug...

Posted on Dec 30, 2009

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I want the connection of kawasaki HD3 125 wiring to reinstall


Hi, Anonymous for this situation I would call my local dealer or reputable shop's service/parts department and inquire about any possible quick fix, answers, or parts inquiry. For more information about your issue and valuable "FREE" downloads that you will need please click on the links below. Good luck and have a nice day.
kawasaki hd III cdi 2strk 125 wiring
Kawasaki KX125 Service Manual
OEM Parts for Kawasaki
Kawasaki KX250F Owner Manual

Aug 22, 2016 | kawasaki Motorcycles

1 Answer

What tranmisson oil can I use for my 97 125 kawasaki 2stroke dirt bike would 10w-40 be okay ?


Hi, Anonymous for this scenario you will need your service/owners manual if you can't find the first and best tool you ever bought for your Kawasaki, despair not, for a mere $0 you can download another one. For more information about your issue and valuable "FREE" downloads that you will need please click on the links below. Good luck and have a nice day.
Dirt Rider Magazine
KX250 Oil Kawasaki 2 Stroke
Kawasaki KX125 Service Manual
http://mybikemanuals.com/kawasaki/kawasaki-kx-owners-manuals

May 09, 2016 | kawasaki Motorcycles

1 Answer

How do i rebuild a 99 kx250 engine


Hi Jeff, I am sorry you can't find the first and best tool you ever bought for your Kawasaki but despair not for a mere $0 you can download another one. For more information about your issue, please visit the websites below. Good luck and have a nice day.
KX250 motor fast tear down
1999 KX 250 Rebuild Part 1
https://www.howtomotorcyclerepair.com/images/Kawasaki-KX125-KX250-Service-Manual-Repair-1999-2000-2001-2002-99924-1244-04.pdf

Dec 10, 2015 | 2006 kawasaki KX 250

2 Answers

1989 Kawasaki KX250 Manual


1989 Kawasaki KX250 Repair Manual Download
This Manual Covers The Following Machines:

1988 Kawasaki KX125 2-Stroke Motorcycles
1988 Kawasaki KX250 2-Stroke Motorcycles
1988 Kawasaki KX500 2-Stroke Motorcycles
1989 Kawasaki KX125 2-Stroke Motorcycles
1989 Kawasaki KX250 2-Stroke Motorcycles
1989 Kawasaki KX500 2-Stroke Motorcycles
Product Download Information Page

May 23, 2014 | Computers & Internet

1 Answer

2001 kx125 leaking oil


It sound like its just the seal in the casing through which the drive shaft emerges.Straight forward job to replace. (Workshop manual for your bike can show you step by step)

Aug 24, 2012 | 2003 kawasaki KX 125

1 Answer

Will the 2008 kx250f wheels fit on a 2010 kx250f


Measure them and see. But, anything can be made to fit if you really want it to.

May 28, 2012 | kawasaki Motorcycles

1 Answer

Does 06 rmz450 rear wheel fit kx250f 04 05


No it is a different size carrier and ring set on the rim, the hub is probably larger on the rmz450 then the kx250f

Dec 21, 2009 | 2004 kawasaki KX 250 F

1 Answer

Need replacement front wheel for zxr 400L 1991


If the width of the hub and the axle size is the same, and if the hub will index into the fork stem retainer, you can use any wheel you want. Brand is not sacred. The wheels from many Hondas, Yamahas, Kawasakis and Suzukis are interchangeable. The speedo connections and brake fittings often don't match up so a slight bit of rigging is sometimes needed.

Google " motorcycle salvage " and you can probably get exactly the wheel you need.

Please rate this solution as a " FixYa ". Thanks!

Mar 24, 2009 | 1991 kawasaki ZXR 400

Not finding what you are looking for?
2006 Harley Davidson FXDBI Street Bob Logo

Related Topics:

303 people viewed this question

Ask a Question

Usually answered in minutes!

Top Harley Davidson Experts

Arnie Burke
Arnie Burke

Level 3 Expert

4514 Answers

Gills Lango

Level 2 Expert

195 Answers

Mike

Level 3 Expert

4334 Answers

Are you a Harley Davidson Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...