Question about 2000 Yamaha YZF-R1

2 Answers

Wont start i put in a new ignition. now my fuel pump wont ingage and my neutral light wont come on. for some reason my bike will not start or turn over. what is wrong and how do i fix it?

Posted by on

  • sgaffigan Feb 17, 2009

    i did that they are all fine. we even jumped the starter cylanoid. and all it did was turn. i think it has something to do with the neutral light not coming on.

  • matthewmystr Apr 14, 2009

    my r1 wont run after i've put it in gear... the clutch is in and the side stand is up, it just cuts out. help me please

×

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Wont start

i put in a new ignition. now my fuel pump wont ingage and my neutral light wont come on. for some reason my bike will not start or turn over. what is wrong and how do i fix it?

Posted by wont start - avatar9.jpgsgaffigan on Feb 10, 2009

    • Added by sgaffigan Over a year ago
    • i did that they are all fine. we even jumped the starter cylanoid. and all it did was turn. i think it has something to do with the neutral light not coming on.

Posted on Oct 30, 2011

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 66 Answers

Check yor fuses in your fuse box.also check main fuse.

Posted on Feb 16, 2009

2 Suggested Answers

  • 827 Answers

SOURCE: 2008 yamaha r6 wont start i put in a new ignition now my fuel pump wont ingage and my neutral light wont come on for some reason my bike will not start or turn over what is wrong and how do i fix

Good Morning,. I found this for you.. worth a shot:

  • verify that the main fuse is not blown. It would be inside the starter relay. To locate the starter relay, follow the cable from the battery's + terminal;
  • if the battery and the main fuse checks good, then check the voltage on the red wire from the starter relay to the ignition switch;
  • do the same and check for the presence of +12 to the brown wire from the ignition switch to the CDI.
  • Best regards
  • Ck

Posted on Nov 02, 2011

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Zx7r faultsMy zx7r, ive got no Ignition or Neutral light, I have replaced the ignitor unit,the clutch switch, the battery,the side stand switch,the junction box, the fuel pump and still no ignition? I


CHASE YOUR POWER FROM THE BATTERY TO THE SOLENOID AND THE STARTER, IS IT IN NEUTRAL , MOVE THE BIKE BACK AND FORTH, MOVE EASILY CHECK THE NUETRAL SWITCH ON THE ENGINE IS IT GROUNDED.

Jun 03, 2013 | Motorcycles

1 Answer

Car only starts sometimes


The start circuit from the ignition switch to neutral safety switch to the solenoid on the starter might be bad. Look for power there at solenoid or at neutral safety switch when it doesn't want to crank over.

Jan 02, 2012 | 1988 Pontiac Firebird

1 Answer

2008 yamaha r6 wont start i put in a new ignition now my fuel pump wont ingage and my neutral light wont come on for some reason my bike will not start or turn over what is wrong and how do i fix


Good Morning,. I found this for you.. worth a shot:
  • verify that the main fuse is not blown. It would be inside the starter relay. To locate the starter relay, follow the cable from the battery's + terminal;
  • if the battery and the main fuse checks good, then check the voltage on the red wire from the starter relay to the ignition switch;
  • do the same and check for the presence of +12 to the brown wire from the ignition switch to the CDI.
  • Best regards
  • Ck

Oct 30, 2011 | 2008 Yamaha YZF-R6

2 Answers

The bike cuts out when riding along. It won't restart for quite a while. While in this state when it wont restart, when the ignition is turned on, the fuel pump is heard priming away but wont stop. The...


I would check for air leaks on the input side and possibly the output side of the pump. Maybe try a new pump.
It sounds like it is pumping air not fuel.

Jan 17, 2011 | Hero Honda Karizma Motorcycles

2 Answers

Starting fault


There are two safety switches that you may need to test. 1) Neutral safety switch- this switch is what tells the bike that it's in neutral and allows the starter to engage. 2) Kickstand safety switch- this switch will not allow the bike to run in gear if the kickstand is down. My initial guess is the neutral safety switch. If the neutral safety switch is bad, then you will not be able to start the bike with the kickstand down because the bike thinks that it's in gear (even if in neutral). This also may explain why the initial intermitent problem of not starting when warm since the metal contacts will expand and possibly not make contact when warmed up. Are you trying to start the bike with the kickstand up or down? If it were the kickstand safety switch, the bike would probably start okay and then die when you put it in gear.

Oct 10, 2009 | 1995 kawasaki ZZR 1100

1 Answer

When I try to start my bike, it appears that the engine is not being primed. Cannot here the pump running.


This could be a number of things - the power is interlocked by the neutral switch/side stand relay - bike must be in neutral OR the sidestand must be up in order to get power to the fuel pump relay.

Things to check:
Fuses for ignition and fuel pump
sidestand up &/or bike in neutral (neutral light displayed)
kill/run switch in 'run'
sidestand relay
fuel pump relay
Tip Over Switch


Aug 15, 2009 | 2004 Suzuki GSX-R 1000 Mladin Replica

2 Answers

Truck wont start, new battery, good fuses, bench tested starter they say its good, cables look ok.Turn ignition and dash lights come on can hear fan motor running.


test starter solinoid wire from harness, with a helper put test light on wire get friend to turn key to start, light should light up, wires at the bottom of engine may (look) fine

Apr 25, 2009 | 1989 Chevrolet C1500

2 Answers

Bike shut off on the freeway and wont start again.


Got gas? Got water in the gas? Drain the carbs and fuel line.

Check for spark. If no spark then check again with a new plug.
Is the kill switch on? Does the side stand have a kill switch? Is it working properly? Tip-over kill switch on your bike? Check the operation of the ignition switch and all kill switches with a volt ohmmeter.
Are all wires clean and with a solid connections? Check the loom. Any abraded wires? Is the bike in neutral and the neutral light is lit up? If no neutral light, check the neutral switch and neutral switch wire on center casing. With a little luck this will get you back on the road.

Please rate this solution. Thanks!

Apr 05, 2009 | 1995 kawasaki ZX-6R Ninja

3 Answers

Car wont start or turn over


check your theft detterent system. Turn ignition to on and leave it for ten minutes. Turn ignition off and start the car

Feb 05, 2009 | 2003 Pontiac Grand Am

Not finding what you are looking for?
2000 Yamaha YZF-R1 Logo

600 people viewed this question

Ask a Question

Usually answered in minutes!

Top Yamaha Experts

dhnguyen

Level 2 Expert

278 Answers

Steve Sweetleaf
Steve Sweetleaf

Level 3 Expert

1144 Answers

D. E. Hev

Level 3 Expert

1167 Answers

Are you a Yamaha Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...