Question about 1998 Suzuki GSX-R 600

1 Answer

My bike lacks power and backfires now and again sometimes cuts out when coming to a stop

Posted by on

  • Murtaza Akberali  Versi
    Murtaza Akberali Versi May 11, 2010

    Hi ads,

    You have to check the ignition coils.

    secondly if there is water in gas it does behave like tht too.

    What type of igntion system is fitted in your bike?

    Electronic or conventional?

×

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 66 Answers

Check the valve tappet clearance to see if they are set w/in specs. intake-.004" to .008" cold, and exhaust- .008" to .012" cold

Posted on Feb 16, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya Mechanic can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Hard to start, lacks power, backfires, checked for intake leaks, none.


lacking power might indicate cat is plugging up . backfiring might be timing is off a little .

May 16, 2016 | Cars & Trucks

3 Answers

How do i fix a bike that keeps backfiring after having it in a shop?


black plugs is running too rich
you lack of information doesn't include relevant information like engine size, 2stroke -4stroke-points or ignition module
backfiring is the combustion of a air fuel mixture when the inlet manifold is open to the combustion chamber
if 2 stroke it can be from a lean mixture from leaking crank shaft seals, worn rings
if 4 stroke it will occur when the inlet valve is open
this can be from incorrect valve clearance opening the valve too early
the ignition can be from a loose earth wire for the points or ignition module, faulty module or loose wire in the ignition switch or kill switch
I would take it to another bike shop for a diagnosis as the first shop is missing something either from a poor evaluation of the problem or from a lack of experience by the mechanics

Jun 29, 2015 | Yamaha Motorcycles

2 Answers

Whats wrong when your riding and the bike starts cutting out, backfiring, then just goes dead?


The first thing that you can check is the fuel pump, wiring and fuel filter. The power wires coming from the ignition, sometimes get corroded. the symptoms sounds like fuel starvation.

Mar 15, 2015 | 2001 Suzuki SV 650 S

1 Answer

I have a 05 Yamaha Kodiak 450. I can run all over the wood and no problems, but if I open her up on the road about 35-40 after a few min it will backfire and it is like someone is cutting off the gas. If I...


carb needs overhaul or high speed jets need ajustn--hav a pro du this cause if u lean it out too much-u can fry the engine--clymer makes a mechanics manual for motorcycles and atv

Nov 02, 2013 | Cars & Trucks

1 Answer

562xp backfire loss power


There were some issues with the fuel hose becoming kinked under heavy load, there is a later hose to stop this happening, the hose has a grommet which pulls into a recess in the plate under the carb, you can try removing it from the recess which gives it less bend as it comes up to the carb.

Jul 13, 2013 | Husqvarna 562xp Auto Tune 24" Chainsaw

2 Answers

1996 Suzuki Savage 650 backfires on cutoff


I had the same prob with my 97, It was not the head gasket but the O-ring on top of the head. Replaced the O-ring and has been running good for a year now with no backfire. Hope this helps.

Aug 23, 2009 | 1996 Suzuki LS 650 Savage

1 Answer

Bike stops and then backfires


Lean mixture..might need carb adjustment.

Aug 18, 2009 | 1985 Honda GL 1200 Interstate Gold Wing

2 Answers

2003 dyna ignition breaking down


It never hurts to check your grounds, they have a habit of loosening up. It sounds like either the voltage regulator or the stator is failing to me. If you can get it to fail at home take a multi-meter and get a reading on the stator, I don't know the values on a dyna, but you should get a reading at idle and it should climb as you rev the motor. When my sporster did this it turned out to be the stator.

Jun 19, 2009 | 2003 Harley Davidson FXDWG Dyna Wide Glide

2 Answers

Backfiring, flames coming out of exhaust and cutting out


Sounds to be a timing problem or burnt exhaust valve.. A compression test will tell the story.

Jun 02, 2009 | 2000 Suzuki VL 250 Intruder LC

Not finding what you are looking for?
1998 Suzuki GSX-R 600 Logo

Related Topics:

180 people viewed this question

Ask a Question

Usually answered in minutes!

Top Suzuki Experts

yadayada
yadayada

Level 3 Expert

77202 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

4536 Answers

Richard
Richard

Level 2 Expert

83 Answers

Are you a Suzuki Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...