Question about 2004 Honda VT 750 Shadow Aero

1 Answer

Can you tell me how to removed the front fender from a honda sharow 2005 750cc

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 2,559 Answers

4 10mm bolts located on the inside of the fender bolted into the shock tower.


Please rate this a fixya

Posted on Feb 03, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do i remove front washer pump on honda jazz 2005


It should be located at the bottom of your washer reservoir, which can be accessed through the right side fender. Just pull the fender liner out a bit where it contacts the front bumper cover. Then, unplug it and pull it out of the tank.

Aug 21, 2014 | 2005 Honda Jazz 1.4

1 Answer

How to replace front signal light bulb for 1997-2001 Honda CR-V


If the lens is attached by 2 screws from the front then remove the screws and replace the bulb from the front

Jan 09, 2014 | Cars & Trucks

1 Answer

How to remove/replace front headlight unit (not Bulb) on a 2002 Honda Accord LX, Have removed all but one bolt, it appears that I need to access the last bolt through the front wheel well area, is this...


If i recall correctly, when i did this job, you had to take down the front fascia, not the inner plastic wheel fender. However, to reach the turn signal for replacement, you can do it by removing the inner fender, and no need to touch the headlight assembly. Remember to reconnect the turn signal cable at the time of reassembly..... i forgot that, and had to take out the fender again to reach the connector.

Sep 16, 2010 | 2002 Honda Accord

2 Answers

I have Honda Shadow VT 600 C 1999 I need front


can you contact a Honda Shop? I think you can still buy a new one if you can afford.

May 12, 2010 | 1999 Honda VT 600 C Shadow

1 Answer

How do you change a front signal bulb on a 2004 accord


Front turn signal bulb replacement

1. Remove the inner fender
2. Disconnect the 3p connector from the front turn signal/side marker light.
3. Turn the bub socket ( 45 degree ), counterclockwise to remove the bulb.
4. Install a new bulb in the reverse order of removal.

Apr 12, 2010 | 2004 Honda Accord

1 Answer

What do i remove to replace right turn bulb on 2005 honda civic


I assume you are talking about a front bulb. If not, leave a comment and I will tell you about the rear bulb.
If you are changing the bulb on the driver’s side, start the engine, turn the steering wheel all the way to the right, and turn off the engine. If you are changing the bulb on the passenger’s side, turn the steering wheel to the left.
Use a flat-tipped screwdriver to remove the holding clip from the inner fender, and pull the inner fender cover back.
Remove the socket from the headlight assembly by turning it one-quarter turn counterclockwise.
Remove the bulb from the socket by pushing it in and turning the bulb counterclockwise until it unlocks.
Insert the socket back into the headlight assembly. Turn it clockwise to lock it in place.
Test the lights to make sure the new bulb is working.
Put the inner fender cover in place.
Install the holding clip. Lock it in place by pushing on the center.
Hope this helps you.

Nov 22, 2009 | 2005 Honda Civic

2 Answers

Makes buzzing sound. will not start..battery is charged.


to trouble shoot the problem try to check the ignition switch .and the solenoid if the battery is charge .

Jul 30, 2009 | Yamaha Royal Star Tour Deluxe Motorcycles

1 Answer

How can I change the headlights in a 1998 Honda Accord?


Its not that hard but you have to remove bumper to get to the two bottom bolts that holds the headlights. First remove grille and there are 2 10mm bolts that holt the tip of fenders they are the first bolts under the fender weld closes to the bumper cover. Then there are two bumper mounts/brackets that hold bumper to frame/radiator support. they are held by (4) 12mm bolts may need a swivel socket to get to them( easily accessed if you remove front signal lights in the bumper held by philips screws in the corners).After removing bracket bumper should come right off. Headlights are in plain clear view. (4) 10mm bolts and you are done. Re-install in the reverse. Good Luck . If I fixed ya leave me a FIX-YA comment. Contact me if you need more info

Dec 10, 2008 | 1998 Honda Accord

2 Answers

Remove front bumper honda accord


you will need to remove the 2 front signal lights by loosening the single captive screw on each of them. under the signal lights , you will see 2 14" bolts holding each side of the bumper. make sure you loosen the screws that hold the bumber to the fenders.

Jul 15, 2008 | 1998 Honda Accord

Not finding what you are looking for?
2004 Honda VT 750 Shadow Aero Logo

Related Topics:

193 people viewed this question

Ask a Question

Usually answered in minutes!

Top Honda Experts

Arnie Burke
Arnie Burke

Level 3 Expert

4497 Answers

yadayada
yadayada

Level 3 Expert

63801 Answers

Gino Cussen
Gino Cussen

Level 2 Expert

216 Answers

Are you a Honda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...